Advertisement
Facility Equipment/Software

Hydrofoil Mixing Impeller

November 25, 2014 8:13 am | by Sharpe Mixers | Product Releases | Comments

A line of hydrofoil impellers that incorporate a split-hub design which is stronger, more adjustable, and easier to install and remove than conven-tional one-piece or bolted-blade impellers is available from Sharpe Mixers, Inc. of Seattle, Washington. Sharpe HYFLO Impellers feature four blades with a narrow, low-pitch section at the tip where the speed is fastest and a wider, higher-pitch se...

LISTED UNDER: Mixing

In-Circuit Debugging and Trace Probe

November 25, 2014 3:56 am | by IAR Systems | Product Releases | Comments

I-jet Trace is a powerful probe providing extensive debugging and trace functionality. I-jet Trace delivers large trace memory capacities and high-speed communication via USB 3. It supports all ARM Cortex-M cores, including the new ARM Cortex-M7 core, with Embedded Trace Macrocell (ETM)...

LISTED UNDER: Testing Software

Linear Roller Block and Rail Systems

November 19, 2014 8:08 am | by Lm76 | Product Releases | Comments

LM76 140 Industrial Dr. November 10, 2014 E. Longmeadow, MA 01028 413-525-4166 Narrow, Low Cost, High Linear Accuracy, Linear Roller Block and Rail Systems E. Longmeadow, MA – Low cost, SAIBO SB-LGB Linear Roller Block and Rail Systems are available from LM76 in three sizes to meet load requireme...

LISTED UNDER: Linear Motion Systems | Robotic Systems
Advertisement

Compact, High-Speed, Six-Axis Aseptic Robot

November 18, 2014 8:57 pm | by Denso Robotics | DENSO Robotics | Product Releases | Comments

DENSO Robotics announced introduction of its new compact, high-speed, VS-050 six-axis aseptic robot, which features an ISO 5 cleanroom rating and specially designed coverings, for applications where biocontamination control is required. “We created the VS-050 aseptic robot because of rapidly increasing demand in the pharmaceutical, medical and life sciences sectors,” said Peter Cavallo, robo...

LISTED UNDER: Robotic Systems | Assembly Equipment

PTFE Natural Forming Mandrels

November 18, 2014 2:07 pm | by Applied Plastics Co. Inc. | Applied Plastics Co., Inc. | Product Releases | Comments

A line of Teflon® coated forming mandrels for catheter fuse welding and tipping operations that are designed to optimize I.D. quality and produc-tion speed are available from Applied Plastics Co., Inc. of Norwood, MA. Applied Plastics’ PTFE Natural® Forming Mandrels feature a smooth surface that provides a 0.5 dynamic coefficient of friction to prevent sticking, block tubing from shrinking, ...

LISTED UNDER: Catheter Manufacturing Equipment | Welders

Maintenance-Free Venturi Vacuum Pump

November 6, 2014 2:46 pm | by Vaccon Company | Vaccon Company | Product Releases | Comments

Vaccon’s RTM series vacuum cartridges and pumps, ideally suited for the packaging industry, replace failed or clogged multi-stage pumps to maximize productivity and minimize downtime. Unlike multi-stage cartridges, Vaccon’s single stage cartridges allow dirt, dust and debris to pass through the pump without clogging. RTM cartridges thread directly into existing multi-stage vacuum pumps and...

LISTED UNDER: Extrusion Equipment | Machining Equipment & Tools | 3D Scanning

Multi-Purpose Swabs

November 3, 2014 4:35 pm | by MDT Staff | Qosina | Product Releases | Comments

Qosina offers a wide selection of high quality and economical single-use swabs, in addition to its extensive line of single-use components. These products can be used for countless applications in the medical, biological, chemical, pharmaceutical, optical, electronic, industrial, cosmetic, and dermatological industries. Available in a variety of materials, shapes, and sizes, these swabs are...

LISTED UNDER: Wipes and Swabs

Fully Illuminated 30mm Pushbutton

October 24, 2014 4:11 pm | by MDT Staff | APEM Components, Inc. | Product Releases | Comments

APEM, Inc. is pleased to announce the new FP30 series pushbutton. Available in either snap-in or threaded bush mounting, this large but lightweight pushbutton is only 1.5 to 2.5mm for the snap in version, and 1 to 9mm for the threaded bushing version...

LISTED UNDER: Switches/Pushbuttons | Automation Equipment
Advertisement

Large-Area Nanoimprint Lithography

October 21, 2014 12:48 pm | by MDT Staff | Product Releases | Comments

The new SmartNIL large-area nanoimprint lithography (NIL) process provides a low-cost, large-area and high-volume-manufacturing solution for a variety of advanced devices. These include: photonic-based devices such as light-emitting diodes (LEDs), lasers and photovoltaics; micro arrays and nano-devices for medical devices and bioengineered applications; and advanced storage media, including...

LISTED UNDER: Lithography

Super-Flow Spray Gun System

October 17, 2014 8:30 am | by MDT Staff | Product Releases | Comments

Dymax Corporation has introduced the new SG-200 Super-Flow Spray Gun System, designed for masking and coating applications where significantly higher flow rates are required. With achievable flow rates of 2.5 – 20 oz. per minute, the system helps operators...

LISTED UNDER: Dispensers/Fillers | Flow

Production of Monodispersed Droplets

October 14, 2014 8:30 am | by MDT Staff | Product Releases | Comments

Dolomite Microfluidics, a sister company to flow chemistry specialist Syrris, has developed an innovative range of Micro Droplet Systems for automatic, seamless production of monodispersed droplets. Built around Dolomite’s pulseless pressure pumps...

LISTED UNDER: Dispensers/Fillers | Dispense

Automated Fluid Dispensing Systems

October 9, 2014 8:30 am | by MDT Staff | Product Releases | Comments

Nordson EFD, a Nordson company, introduces its new series of automated fluid dispensing systems for streamlined integration into any manufacturing operation. The PRO Series integrates vision and laser height sensing with closed-loop encoding to provide a complete automated solution that is...

LISTED UNDER: Dispensers/Fillers | Dispense

Analytical Services

September 30, 2014 5:33 pm | Evans Analytical Group | Products

CHEMIR’s analytical services are at the core of our scientific R&D solutions. For over 50 years CHEMIR’s scientists have been solving difficult industrial and commercial issues through analytical chemistry. Why would a company need an outside lab to assist with chemical analysis? Here are some common requests: Identify complex additives in various product typesChemical analysis flasks Verify a chemical composition Investigate the cause or causes of failure Assist in determining the source of chemical contamination Understand the chemical "recipe" of a product Perform comparison tests between products Reverse engineer (deformulate) a competitor's product Perform analysis in support of litigation

LISTED UNDER: Testing Software

Mobile Ductless Fume Hood

September 26, 2014 8:30 am | by MDT Staff | Product Releases | Comments

Air Science USA has introduced its new Mobile Ductless Fume Hood. The Mobile EDU is excellent for classroom demonstrations and industrial training. It is totally self-contained and provides all around visibility. The EDU is easily moved... 

LISTED UNDER: Fume Hood

UV LED Curing Solutions

September 19, 2014 8:30 am | by MDT Staff | Excelitas Technologies Corporation | Product Releases | Comments

Excelitas Technologies Corp. today announced the launch of its new OmniCure AC8 Series UV LED Curing Systems. This latest addition to the AC Series of UV LED Curing solutions features superior optical uniformity...

LISTED UNDER: Adhesive-Curing Systems | UV Curing

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading