Advertisement
Production/Assembly Equipment

PDS100

June 24, 2015 2:08 pm | Fluid Metering, Inc. | Products

PDS100 Programmable Dispensing System The PDS-100 is a precision system capable of dispensing or pumping fluids ranging from 3 uL per dispense or 18 uL/min continuous (Single RH00LF) up to 1536 mL/min (Dual Q3) into pressures ranging from 10 psi to 100 psi (RH). For more info visit our website at www.fluidmetering.com

LISTED UNDER: Dispensers/Fillers | Metering

Pouch Dispenser with Timing Screw

June 11, 2015 3:46 pm | by AZCO Corp. | AZCO Corp. | Product Releases | Comments

AZCO Corp.’s SUR-PAK model VIP-100 is a motor fed precision cutting machine. It is designed to cut and dispense a wide variety of materials of varying thickness fed from a continuous web. If you are...

LISTED UNDER: Dispensers/Fillers

iQ Series iQLogiX™

May 20, 2015 5:06 pm | Dukane Corporation | Products

Dukane Corporation iQLogiX™, an optional module available on Dukane’s iQ Series Ultrasonic Generators to simplify automation and configuration of work cells in ultrasonic welding process. Higher level of safety controls, part in place detection, part clamping, light curtains and many more features can be configured by simply inserting this optional module in Ultrasonic Generators. It eliminates the need of other electrical components. Once iQLogiX™ module is inserted, the UMMA (Ultrasonic Module Menu Adapt) feature of the iQ Series generator populates the menu of Dukane’s iQ Explorer II software. It is simple to program all the controls, I/O connections, and set up multiple welding recipes using this user interface.

LISTED UNDER: Ultrasonic Welders | Welders
Advertisement

iQ Series Servo Ultrasonic Welder

May 20, 2015 4:10 pm | Dukane Corporation | Products

Dukane's patented iQ Servo Welder is the next step in the evolution of ultrasonic welding technology. Combining the efficiency and reliability of a 100% digitally controlled Multi-Core iQ Series power supply with the precision of an advanced servo press, the Dukane Advanced iQ Servo Welder delivers unprecedented repeatability, accuracy and reliability to your ultrasonic bonding process.

LISTED UNDER: Welding | Assembly Equipment | Ultrasonic Welders

Tubing Stripper

May 11, 2015 4:54 pm | by Beahm Designs, Inc. | Beahm Designs, Inc. | Product Releases | Comments

The Stripper is released as a series of 3 new products, offering device manufactures a range of efficient solutions designed to speed and simplify a formerly tedious, labor-intense process. Until now, thermoplastic tubing that has been laminated or reflowed...

LISTED UNDER: Strippers/Cutters

Compact Laser Marking Workstation

April 16, 2015 4:10 pm | by Amada Miyachi America | Product Releases | Comments

Miyachi America Corporation, a leading manufacturer of welding, marking, cutting and micro machining equipment and systems, announces its new LMWS Laser Marking Workstation, specifically designed for benchtop operation. A major facelift to Miyachi’s LMW2020...

LISTED UNDER: Laser Micro-Machining | Laser Sintering | Marking Machines

Digital Printing Service For Front Panels and Enclosures

March 27, 2015 4:57 pm | by OKW Enclosures, Inc. | OKW Enclosures, Inc. | Product Releases | Comments

OKW’s metal enclosures division METCASE is pioneering the use of digital printing for front panels, rack cases and instrument housings. METCASE’s new state of the art digital technology means legends, logos and complex photo quality graphics can be printed on front panels and...

LISTED UNDER: Production Tools

Eureka Dry Cabinet Ultra Low Humidity Storage

March 25, 2015 4:59 am | Eureka Dry Tech | Products

Medical grade products requires strict control during design & manufacturing process. Moisture affects product quality, reliability and yield. Eureka's Ultra Low Humidity Dry Cabinets provides storage environments of <5%RH, <10%RH, <20%RH with fast recovery times, suitable for medical grade devices. Eureka's dry cabinet with powerful multi-porous molecular sieve desiccants will provide alternative drying methods to traditional baking oven, nitrogen purge, vacuum drying and desiccants while meeting IPC/JEDEC J-Std-033 and IPC-1601 standards. Moisture controlled storage cabinets are essential in any manufacturing plant that requires QC traceability. Contact us today for free consultation in moisture control.

LISTED UNDER: Assembly Equipment | Material Handling | Ovens
Advertisement

CableEye® HVX HiPot Cable Tester System: Base Unit Item 829

March 4, 2015 1:10 pm | CAMI Research, Inc. | Products

For diagnostic and Pass/Fail Testing — Permits expanded testing for insulation resistance and dielectric breakdown. After checking for opens, shorts, miswires, and resistance limits, the HVX hipot module will apply a user-selectable voltage from 10v to 1500v DC, or 10v to 1000v RMS AC, to each connection group in the cable. Ramp Up, Ramp Down, Dwell Time (same as Test Time), Trip Current, and Trip Delay (same as Soak Time) may be programmed for your specific requirements. Current leakage detected during the high voltage test phase provides a measure of insulation resistance up to 1 GΩ, and any leakage current exceeding a preset limit reveals the presence of moisture, flux, or other contamination on exposed contacts.

LISTED UNDER: Rapid Prototyping Equipment | Cable Assemblies | Wire and Cable

Light Director™ Guided Assembly System: A CableEye® Accessory

March 4, 2015 12:52 pm | CAMI Research, Inc. | Products

For assembling connectors used in aerospace, medical, and other high-reliability applications. Light fibers driven by super-bright LED lamps individually illuminate target cavities in the connector being assembled.
 • Light-Directed guided assembly • 1st-Sided Pinning and 2nd-Sided Pinning with electrical test • Increases productivity by up to 50% over manual assembly • Reduces technician fatigue • Reduces errors to near zero ◊ The Light Director™ system is an accessory for the CableEye® PC-Based cable test system. It requires a reusable mounting kit for each mating connector (see Items CB37A to CB38A), and the AutoBuild Guided Assembly Software (Item 728).

LISTED UNDER: Rapid Prototyping Equipment | Cable Assemblies | Assembly Equipment

CableEye® M3U Cable Tester System: Item 821U

March 4, 2015 12:46 pm | CAMI Research, Inc. | Products

For diagnostic and Pass/Fail Testing — Find, display, log, document: opens, shorts, miswires, intermittent connections, continuity, contact and isolation resistance, embedded resistors and diodes. • 152 Test point base unit (for ≤76-conductor cable) • Expandable to 2560 test points (for >76-conductor cable) • Resistance measurement 0.3Ω-10MΩ • Graphical User Interface (GUI) • 9x12" bench footprint
 ◊ Includes: CB15 board set (Item 745), PC s/w, DB of >200 standard cables, 1yr warranty, 1yr free tech support, one-year free software and database upgrades. USB interface standard. ◊ If cables will never exceed 64 conductors, the M2-Basic system (Item 810) offers similar capabilities without resistance measurement at a lower cost.

LISTED UNDER: Rapid Prototyping Equipment | Cable Assemblies | Wire and Cable

Single Slide Desktop Scanner

February 5, 2015 10:58 am | by Hamamatsu Photonics UK Ltd | Product Releases | Comments

Hamamatsu Photonics introduces the NanoZoomer SQ; the latest addition to the NanoZoomer slide scanner range. It is a single slide desktop scanner, compact in size and affordable in price. Its price and ease of use brings telepathology to your fingertips. The NanoZoomer SQ is ideal for developing networks, sharing images...

LISTED UNDER: 3D Scanning

Robotic Systems

February 4, 2015 11:35 am | by Nordson EFD | Product Releases | Comments

The system consists of the Pro, the E, and the EV series. The PRO Series integrates vision and laser height sensing with closed-loop encoding to provide a complete automated solution with advanced dispensing capabilities. A smart vision CCD camera captures detailed component part images and converts...

LISTED UNDER: Robotic Systems | Adhesive Dispensers | Assembly Equipment

Compact Dust and Fine Removal System

December 29, 2014 3:25 pm | by Size Reduction Specialists Corp. | Size Reduction Specialists Corp. | Product Releases | Comments

Size Reduction Specialists, known for the Bi-Cutter screenless granulator, announces the release of their latest DFS series Dust and Fine Removal System. The DFS Series is a line of innovative, compact dust and fine separation systems developed to enhance molding procedures by the removal of dust, powders and fines from regrind or v...

LISTED UNDER: Extrusion Equipment | Molding Equipment | Molding Systems

Tech Drawer Pull

December 10, 2014 12:30 pm | by Lista International Corporation | Lista International Corporation | Product Releases | Comments

Lista, a STANLEY Industrial & Automotive, LLC business, proudly announces its new line of Tech Drawer Pull aluminum anodized drawer handle covers. Available in three attractive finishes, these sturdy handle covers are rugged, easy to clean, and dependable, making them ideal for automotive, laboratory, museum, and health care settings. The new Tech Drawer Pull has been carefully designed to s...

LISTED UNDER: Material Handling | Handles and Knobs

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading