Advertisement

High-Tech in Ultrasonic Welding of Thermoplastics Makes for Profitable Production

February 2, 2010 4:23 am | Product Releases | Comments

Herrmann Ultrasonics (MD&M West Booth 3224) has developed a new ultrasonic welding machine, HiQ evolution. Energy efficiency, user-friendliness, the upcoming New Machinery Directive, and ergonomics were all considered while developing this machine.

LISTED UNDER: Welders
Advertisement

Thermal Spot Curing System Reduces Epoxy Curing Time by up to 10x

October 22, 2009 5:43 am | Irphotonics | Product Releases | Comments

IRphotonics (Booth 1537), a world leader in the design and manufacture of Infrared-based materials and systems, has announced results of independent product evaluations by leading medical device manufacturers for its iCure™ Infrared spot curing system.

LISTED UNDER: Adhesive-Curing Systems

Abrasive Blaster Cleans Surgical Instruments

October 15, 2009 6:37 am | Product Releases | Comments

Comco Inc. (Booth 1640), an industry leader in the manufacture of micro-abrasive blasters, offers the AccuFlo abrasive blaster. Surgical tools such as scissors, knives, saws, and scalpels are becoming too expensive to throw away after one use.

LISTED UNDER: Production Tools

High-tech Ultrasonic Welding of Thermoplastics

August 5, 2009 10:43 am | Product Releases | Comments

The ultrasonic welding machine HiQ evolution focuses on energy efficiency, user-friendliness, the upcoming New Machinery Directive, and ergonomics.

LISTED UNDER: Welders

Vacuum Pencil Grinders Offer Precision Deburring with Source Capture

July 7, 2009 7:24 am | Dynabrade | Product Releases | Comments

A new series of air-powered Vacuum Pencil Grinders offers precision deburring and finishing with vacuum shrouds diverting dust and debris to a central vacuum source.

LISTED UNDER: Grinding Machines

Wrist Strap and Ground Monitor for Electronics Assembly

June 8, 2009 7:54 am | 3M Company | Product Releases | Comments

This wrist strap and ground monitor provides effective workstation monitoring in applications with two metal ground requirements. The 773 monitor grounds and monitors two operators and two metal grounds.

LISTED UNDER: Assembly Equipment

System Enables LED UV Bench Top Curing

May 8, 2009 12:19 pm | Kinetic Instruments, Inc. | Product Releases | Comments

SpotCure B6 is a bench top UV curing system that uses a hand held probe and features interchangeable LED emitters available in 365, 405, and 460 nm wavelengths. A unique IR eye activates the emitter when the probe is removed from the base.

LISTED UNDER: Adhesive-Curing Systems

Curing System Offers Reliable LED Technology

May 8, 2009 12:19 pm | Product Releases | Comments

The OmniCure LX300 is an LED UV spot-curing system for medical device, microelectronic, and optoelectronic manufacturing applications.

LISTED UNDER: Adhesive-Curing Systems

High-Intensity Spot Lamp Offers Low Operating Cost

April 6, 2009 12:12 pm | Product Releases | Comments

The BlueWave 75, a high-power spot lamp, provides the optimal combination of low operating cost with high-intensity output to accommodate a wide variety of bonding applications.

LISTED UNDER: Adhesive-Curing Systems

Servo Ultrasonic Welding System With Melt-Match Technology

April 2, 2009 5:33 am | Dukane Corporation | Product Releases | Comments

This servo ultrasonic welding system is designed with Melt-Match technology. Current pneumatic ultrasonic technology poses several areas for improvement, such as process repeatability, ability to validate/calibrate, and higher manufacturing costs.

LISTED UNDER: Welders

Grinder-Polisher Offers Repeatable Sample Preparation

March 17, 2009 11:14 am | Buehler Ltd | Product Releases | Comments

The EcoMet 250 grinder-polisher is designed to meet medical industry needs. This product offers options for preparing samples in single or central force modes when combined with an AutoMet 250 power head.

LISTED UNDER: Grinding Machines

Bench Top Assembly System Equipped With Vision

March 17, 2009 7:30 am | Dispense Works Inc. | Product Releases | Comments

A bench top system was constructed for a pressure sensor manufacture that both dispenses an adhesive then carefully places a single sensing chip inside an individual housing with the help of machine vision.

LISTED UNDER: Assembly Equipment

Filling and Capping System Does Not Require PC for Operation

January 14, 2009 9:25 am | Dispense Works Inc. | Product Releases | Comments

The Ring Dex filling and capping system is ideal for processing small bottles, tubes, and vials in a compact and affordable bench top package. It features a true file based control system requiring no PC for operation.

LISTED UNDER: Dispensers/Fillers

Needle Sharpener Keeps Phoenix on Point

December 5, 2008 7:03 am | Product Releases | Comments

Phoenix Medical Products, a contract manufacturer of various devices used in a number of medical markets, has one department devoted entirely to needle design, production, sterilization, and packaging, as this work has a unique set of challenges.

LISTED UNDER: Grinding Machines | Medical Device Testing

Calendar and Metric Conversion Chart

November 10, 2008 6:52 am | Product Releases | Comments

Boker’s, Inc. offers its complementary 2009 Scheduling Calendar and Metric Conversion Chart is now available. This handy calendar serves as an easy-to-use, one-page scheduling tool, with a convenient metric conversion reference on the opposite side.

LISTED UNDER: Production Tools | Stamping

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading