Advertisement

Pump Handles Air Sensitive, Crystallizing Fluids

February 24, 2012 5:25 am | Fluid Metering, Inc. | Product Releases | Comments

FMI’s miniature “H” Series Pump Heads are now available with an isolation gland to provide a fluid barrier between the pumped process fluid and atmosphere. These pumps are ideal for maintenance-free...

LISTED UNDER: Crystals/Oscillators/Piezoelectrics | Fittings | Air Pump

Swabbable Needleless Injection Site with a One Way Valve

February 23, 2012 6:12 am | Qosina | Product Releases | Comments

Qosina recently added a New Swabbable Needleless Injection Site #80189 to their line. Unlike other needleless sites that allow for bidirectional flow, this site incorporates a one way valve...

LISTED UNDER: Cannulae/Needles/Trocars | Injection Sites | Needle

Connectors Aim to Reduce Tubing Misconnections, Improve Safety in Medical Applications

February 23, 2012 5:28 am | Colder Products Company | Product Releases | Comments

In medical care situations, there are as many as 40 device connectors used with a single patient. Despite the best efforts of well-trained, highly qualified healthcare professionals...

LISTED UNDER: Fittings
Advertisement

Design Your Own Custom Transducer

January 6, 2012 6:05 am | Product Releases | Comments

Omega introduces a new line of all 316L SS Micro-Machined Silicon Pressure Transducers, the MM Series. Omega has developed a custom delivery system that...

LISTED UNDER: Transducers | Fittings | Transducers

Connectors Accommodate Wide Range of Small-Flow Applications

November 7, 2011 6:18 am | Product Releases | Comments

Colder Products Company announces the expansion of the MPC quick disconnect product line to include hose barbs suitable for smaller flexible tubing with 1/8” (3.2 mm) ID.

LISTED UNDER: Fittings

Solvent Technology to Swell Polyurethane Tubing

November 4, 2011 7:23 am | Product Releases | Comments

Swellex™-P polyurethane swelling agent is a swelling agent that is absorbed into the polyurethane, expanding it to a desired dimension, which then allows easy assembly to the fitting or rigid part.

LISTED UNDER: Polyurethane | Polyurethanes | Urethanes

Liquid Flow Sensor for Low-Volume Dosing Applications

August 11, 2011 7:39 am | Sensirion Inc. | Product Releases | Comments

Swiss sensor manufacturer Sensirion is launching a flow sensor for flow rates below 2 cc/sec (120 ml/min) with hydrocarbon-based liquids such as photoresists and solvents.

LISTED UNDER: Sensors | Fittings

Platinum-Cured Silicone Tubing Offers Purity for Fluid Transfer

July 13, 2011 6:53 am | Newage Industries, Inc. | Product Releases | Comments

NewAge Industries manufactures silicone tubing that’s platinum cured for the highest degree of purity. Called Silcon Med-X, it’s one of the company’s medical grades of silicone tubing and reinforced hose.

LISTED UNDER: Silicone | Silicone | Silicone
Advertisement

OEM Pressure Sensors Offer Excellent Media Compatibility

June 22, 2011 5:56 am | Product Releases | Comments

Sensortechnics’ new KMA series measures gage pressures of corrosive and aggressive gases and liquids in ranges from 500 mbar to 100 bar (7 to 1450 psi).

LISTED UNDER: Pressure | Sensors | Fittings

Proprietary Solvent Technology Used to Swell Silicone

June 20, 2011 7:27 am | Microcare Corp. | Product Releases | Comments

MicroCare Medical has announced its new capability agent to swell silicone to address the challenge that design engineers face in joining or assembling molded silicone components with rigid parts and barbed fittings.

LISTED UNDER: Silicone | Silicone | Fittings

Molding Services for Medical Device Components

June 15, 2011 7:07 am | B. Braun Oem Division | Product Releases | Comments

The B. Braun OEM Division of B. Braun Medical Inc. offers injection molding, insert molding and over molding for the production and customization of medical device components.

LISTED UNDER: Molding | Molding Equipment | Molding Systems

Quick Connect Fittings

June 3, 2011 10:13 am | Product Releases | Comments

Value Plastics, manufacturer of plastic tubing connectors, has again responded to customer and market needs by developing an innovative line of new connectors – the MQC Series.

LISTED UNDER: Fittings | Fittings

Micro Flow Switch and Bubble Detector for Liquids

June 3, 2011 7:46 am | Sensirion Inc. | Product Releases | Comments

The Swiss sensor manufacturer Sensirion AG is launching the LG01 micro flow switch for ultra-low liquid flow rates and bubble detection.

LISTED UNDER: Detectors | Switches/Pushbuttons | Fittings

Push-to-Connect Fittings

June 3, 2011 7:24 am | Beswick Engineering Co., Inc. | Product Releases | Comments

Beswick PTC series push-to-connect fittings are designed for use in challenging applications. These fittings provide quick and simple tubing connection/disconnection and leak-tight performance in a space saving package.

LISTED UNDER: Fittings | Fittings | Silicone

Animal-Free Polypropylene Is USP Class VI Offering

May 18, 2011 7:20 am | Product Releases | Comments

Due to increased customer demand and a change in supplier certifications, Value Plastics, manufacturer of plastic tube fittings, has chosen to include a certified USP Class VI polypropylene as one of their core resin offerings.

LISTED UNDER: Polypropylenes | Fittings

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading