Springs
Linear Spring Series
May 23, 2013 4:24 pm | by MDT Staff | Smalley Steel Ring Co. | Product Releases | CommentsSmalley Steel Ring Company has announced the release of the new Linear Spring Series. The new Linear Springs offer a selection of spring loads that react along a straight line, as opposed to a conventional spring that fits in a circular cavity. This means a linear spring may be located in an axial direction but providing a radial force.
LISTED UNDER: Springs
Tight Tolerance Springs and Stamping Capabilities at MD&M East
May 23, 2013 4:09 pm | by MDT Staff | Connecticut Spring & Stamping | Product Releases | CommentsConnecticut Spring & Stamping (CSS) has announced that it will showcase its expertise in producing precision medical product components for medical device OEMs, including springs and progressive stampings, at MD&M East from June 18-20, 2013, to be held at the Pennsylvania Convention Center in Philadelphia, Pennsylvania.
LISTED UNDER: Springs
Tight Tolerance Springs and Stamping Capabilities
February 26, 2013 10:40 am | by MDT Staff | Connecticut Spring & Stamping | Product Releases | CommentsConnecticut Spring & Stamping, a manufacturer of precision parts for the medical, aerospace, firearms and defense industries worldwide, announces that it will showcase its expertise in producing precision medical product components for medical device OEMs, including springs and progressive stampings...
LISTED UNDER: Stamping | Springs
Tight Tolerance Springs and Stamping Capabilities
December 20, 2012 10:25 am | by MDT Staff | Connecticut Spring & Stamping | Product Releases | CommentsConnecticut Spring & Stamping (CSS), a manufacturer of precision parts for the medical, aerospace, firearms and defense industries worldwide, announces that it will showcase its expertise in producing precision medical product components...
LISTED UNDER: Stamping | Prototyping | Springs
Tight Tolerance Springs and Stamping Capabilities
April 5, 2012 6:24 am | by MDT Staff | Connecticut Spring & Stamping | Product Releases | CommentsConnecticut Spring & Stamping (CSS), a manufacturer of precision parts for the medical, aerospace, firearms and defense industries worldwide, announces that it will showcase...
LISTED UNDER: Stamping | Prototyping | Springs
Photo Etching Metals with Spring Characteristics
March 1, 2012 5:47 am | Tech-Etch, Inc. | Product Releases | CommentsTech-Etch specializes in the etching, forming, heat treating, and finishing of components made from metals with superior spring characteristics. Prototypes are delivered in five days.
LISTED UNDER: Photo Etching | Springs | Metals
Double Row Solder Cup Spring Pin Header Strips
June 20, 2011 7:45 am | Product Releases | CommentsMill-Max has developed a convenient and reliable method to make connections between wires and mating components such as P.C. boards, batteries or other cable assemblies with our new single and double row solder cup spring pin header strips.
LISTED UNDER: Springs | Cable Assemblies | Wire and Cable
Horizontal SMT Spring Pin and Target Pin Mate
May 4, 2011 7:07 am | Product Releases | CommentsMill-Max’s 0967 is a low profile, horizontal, surface mount spring pin designed for edge board interface applications: board-to-board or device-to-board.
LISTED UNDER: Springs
Rugged Spring Pins Carry Nine Amps Continuous Current
February 24, 2011 6:16 am | Product Releases | CommentsMill-Max now offers a series of rugged spring pins capable of carrying nine amps continuous current at a low 10°C temperature rise. The Mill-Max 0850, 0851, 0852, and 0853 spring pins are the perfect solution for rugged applications...
LISTED UNDER: Springs
Crimp and Solder Cup Spring Pins
October 18, 2010 7:12 am | Product Releases | CommentsFor customers looking for a spring way to connect a Mill-Max spring-loaded connector to a wire or cable, Mill-Max is pleased to announce two new innovative designs.
LISTED UNDER: Springs | Wire and Cable
Rotor Clip Wave Springs Provide Range of Options for Quick Connectors
June 17, 2010 6:57 am | Rotor Clip Company | Product Releases | CommentsRotor Clip Company Inc., a leading manufacturer of retaining rings, hose clamps, and related products, manufactures a varied range of wave springs for applications requiring quick connectors.
LISTED UNDER: Springs
Machined Spring Features Heli-Cal Flexure
May 26, 2010 6:11 am | Helical Products Co. | Product Releases | CommentsThe Heli-Cal Flexure is a flexible helix (curved beam) machined into a unique configuration that incorporates special design requirements, and performance features and/or characteristics.
LISTED UNDER: Springs
Compression Springs Solve Customers’ Requirements for Smaller Sizes
February 2, 2010 4:23 am | Lee Spring Co | Product Releases | CommentsLee Spring (MD&M West Booth 3364) introduces its Bantam Mini Compression Springs, adding smaller diameters to its Redux Wave Spring line, and expands its stock compression spring offering in wire sizes from 0.006 in. to 0.013 in. These springs combine strength with corrosion resistance.
LISTED UNDER: Springs
High Performance Machined Springs
July 10, 2008 4:41 am | Helical Products Co. | Product Releases | CommentsMachined springs combine the elastic properties of materials such as high strength steels, aluminum and titanium with a curved beam helix to provide precise deflection rates for compression, extension, torsion, lateral bending, and lateral translation spring functions.
LISTED UNDER: Springs
Wave Springs Minimize Assembly Cost
March 11, 2008 10:05 am | Smalley Steel Ring Co. | Product Releases | CommentsMetric Crest-to-Crest wave springs minimize assembly cost and total assembly size due to the reduced spring cavity required. The company offers over 3,000 standard wave springs in 17-7 stainless steel or carbon steel. The metric Crest-to Crest series is available in dimensions from 6 to 60 mm.
LISTED UNDER: Springs
