Advertisement

Flow Relief Valves

September 30, 2014 5:55 pm | FPZ, Inc. | Products

The VRL valves are designed to protect blowers and/or motors pressurization, the valve opens and discharges to the outside. When there is excess in vacuum, the valve opens and takes flow from outside. The valve have been designed for low pressure/low vacuum, with minimal difference between the initial value at which the valve begins to open and its fully-opened position. The valves are supplied with 2 different springs to maximize its efficiency.

LISTED UNDER: Air Pump | Diaphragm Pump

Balloon Manufacturing

September 30, 2014 5:44 pm | Interface Catheter Solutions | Products

Balloon production capabilities cover all phases of manufacturing including prototyping to complete production manufacturing. Our extensive experience allows us to offer you: Balloon sizes from 0.5 mm to 50 mm in diameter and lengths up to 320 mm Wide range of shapes – cylindrical, spherical, oval, conical, stepped, tapered, offset and more Materials expertise with Nylon, Pebax®, Polyurethane, PET and more A variety of textured medical balloons, which allow for surface treatment additives, are available for secure deployment of implantable devices, including stents Wall thicknesses ranging from 0.0002″ to 0.007″ (0.005 mm to 0.178 mm)

LISTED UNDER: Complex

Thermoplastics

September 30, 2014 5:29 pm | Sunlite Plastics | Products

Sunlite has experience in many thermoplastics including: - Polyvinyl-chloride (PVC) Non-Phthalate and Phthalate/DEHP-Free - Custom PVC compounds - Polyethylene (PE) HDPE, MDPE, LDPE, LLDPE and ULDPE - Polypropylene (PP) Homopolymer and Copolymer - Polyurethane (PU) - Ethylene-vinyl acetate (EVA) - Cellulose acetate butyrate (CAB) - Polyamide (PA) Nylon 11, 12 - Thermoplastic elastomer (TPE) - Polyether block amide (Pebax) - Filled materials - Custom colors

LISTED UNDER: Multilumen Tubing
Advertisement

Solution to Cell Culture and Microbial Fermentation

September 30, 2014 8:30 am | by MDT Staff | Product Releases | Comments

With its new BIOSTAT A, Sartorius Stedim Biotech presents a compact bioreactor/fermenter designed specifically as an entry-level model for fermentation and cell culture as well as for educational purposes. The system's control tower features a complete array of measurement...

LISTED UNDER: IVD Components | Peristaltic

Ultra Miniature 2-Port Solenoid Valve

September 19, 2014 8:30 am | by MDT Staff | The Lee Company | Product Releases | Comments

The Lee Company continues to redefine miniature fluidics with the introduction of an even more compact High Density Interface (HDI) solenoid valve. Featuring a 2-port normally closed design, this valve is exceptionally small in size, light weight...

LISTED UNDER: Solenoid Valve

New Miniature Liquid Valve to Improve Fluidic Designs

September 10, 2014 8:30 am | by MDT Staff | Product Releases | Comments

The Precision Fluidics Division of Parker Hannifin announces the release of its newest diaphragm isolation liquid valve, the Series R6. This 6.4 mm valve improves the performance of clinical diagnostic and analytical chemistry systems requiring precision fluidics 

LISTED UNDER: Diaphragm | Isolation

Electronic Fill and Bleed Circuits

August 28, 2014 8:30 am | by MDT Staff | Clippard Instrument Laboratory, Inc. | Product Releases | Comments

Clippard introduces its EFB Series Electronic Fill and Bleed Circuits. A fill and bleed circuit is a combination of...

LISTED UNDER: Other | Pressure/Vacuum

Optimum Clear Flex Piston Reduces Bounce

August 7, 2014 11:40 pm | by MDT Staff | Product Releases | Comments

Nordson EFD, a Nordson company has introduced its Optimum Clear Flex Piston, a new dispensing solution to achieve more consistent results when dispensing viscous fluids...

LISTED UNDER: Dispense
Advertisement

Controller for Exceptional Spray Valve Control

July 18, 2014 10:06 am | by MDT Staff | Product Releases | Comments

Nordson EFD has introduced the 7160RA ValveMate controller. The controller provides an intuitive way to program Nordson EFD's 782RA internal Radial Spray Valve and 7860C-RS Radial Spinner System. The controller's unique microprocessor circuitry provides exact time control of the dispense cycle with an improved user interface...

LISTED UNDER: Dispense | Other

OEM Diaphragm Liquid Pump Provides Twice the Flow, Half the Pulsation

July 9, 2014 9:24 pm | by MDT Staff | KNF Neuberger, Inc. | Product Releases | Comments

KNF Neuberger announced the launch of the new NFB 100 diaphragm liquid pump, which boasts two pump heads driven by one motor. In parallel connection mode, the alternating operation of the pump heads results in smooth and level flow, reducing...

LISTED UNDER: Diaphragm Pump

Next Generation Direct Drive Pump

June 19, 2014 4:01 pm | by MDT Staff | Product Releases | Comments

Flow International Corporation announced the next generation direct drive ultrahigh-pressure pump technology, the HyPlex Prime. The HyPlex Prime represents the newest advancements in highly efficient, direct drive waterjet pumps...

LISTED UNDER: Other

Versatile Mass Flow Controller with Ultra Fast Settling Time

June 18, 2014 7:35 pm | by MDT Staff | Product Releases | Comments

The SFC5000 Series with its excellent long-term stability enables precise control over a wide control range of 1000:1. Its ultra-fast settling time is 50 milliseconds. The excellent performance of the mass flow controller is based on...

LISTED UNDER: Flow

Lubricious Surface Tubing

June 17, 2014 9:22 pm | by MDT Staff | Zeus | Product Releases | Comments

Doctors, hospitals and testing labs are welcoming a newly engineered product with enhanced lubricity...

LISTED UNDER: PEEK

High Performance EMI Filter in 24 Pin DIP Package

June 11, 2014 8:03 am | by MDT Staff | Product Releases | Comments

BetaDyne announced the PFL100 high performance EMI filter. The PFL100 is designed to cost-effectively reduce conducted emissions from DC/DC, amplifiers, and control circuits. The PFL100 is designed to meet CS01, CE03 per Mil Std-461-E...

LISTED UNDER: Other

Custom Fitting & Tubing Assembly

May 23, 2014 8:00 am | by MDT Staff | Product Releases | Comments

Industrial Specialties Mfg., (ISM) has expanded its custom fitting and tubing assembly operations. The company has expanded both facilities and production personnel.  For years, ISM has held a unique manufacturing role, offering modest runs of custom...

LISTED UNDER: Connectors | Fluoroplastic | Nylon

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading