M12 Socket Connectors Provided With Profibus Cable
December 5, 2008 7:04 am | Binder Usa | Product Releases | CommentsThe M12 shielded panel-mounted male or female connector is pre-assembled for Profibus and Ethernet users. The receptacle is attached to a shielded cable with a twisted pair of AWG 22 wires. The Profibus receptacles are available in front- or rear-mount design for mounting to control cabinets.
LISTED UNDER: Connectors | Wire and Cable
Proportional Pressure Control Valve Designed for Roughest Environments
December 5, 2008 7:04 am | Proportionair | Product Releases | CommentsThe QPV ultra high resolution, closed loop, electronic proportional pressure control valves are made for the toughest environments. The QPV maintains its impressive resolution of +/-0.005% F.S. in any orientation without the need for recalibration.
LISTED UNDER: Control | Proportional | Control
Ball Valves Offer Miniaturization Solutions
December 5, 2008 7:04 am | Beswick Engineering Co., Inc. | Product Releases | CommentsThese sub-miniature ball valves are offered in two standard configurations. The MBV-1010-303 is the answer for designers requiring an On/Off valve, while the MBVT-1010-303 is for applications requiring the selection of one of two possible flow paths. These valves weigh only 9.
LISTED UNDER: Ball | Miniature Valve | FlowDesign Talk: Valves
December 5, 2008 7:03 am | by Ralph Buck | The Lee Company | Articles | CommentsVHS Injection Manifold Mounting System By Ralph Buck Ink jet valves have been used in micro dispensing for many years. Their high speed and consistent performance allow for the precise dispensing of fluids.
LISTED UNDER: Dispense | Control | Flow
Circular Nano Connectors Available With Custom Overmolding
December 5, 2008 7:03 am | Omnetics Connector Corp. | Product Releases | CommentsCompany offers a custom molding service on its newly-introduced nano circular connectors. Medical and other high reliability applications are designing equipment that requires the electrical connectors to be molded into equipment housings.
LISTED UNDER: ConnectorsDispensing the Facts on Valves
December 5, 2008 7:03 am | by Steven Young | Articles | CommentsDispense valves can be a vital tool in the assembly and manufacture of medical devices. However, choosing the correct type to use for a particular application may not always be abundantly clear.
LISTED UNDER: Dispense | Control | Flow
Micro-Dispense Nozzles
November 11, 2008 5:34 am | The Lee Company | Product Releases | CommentsMicro-dispense nozzles provide a convenient method of accurately controlling dispensed volumes when used in conjunction with the company’s VHS (Very High Speed) Micro-Dispense Valves.
LISTED UNDER: Dispense | Control
Sub-Miniature Manifolds for Solenoid Valves
November 10, 2008 6:53 am | Clippard Instrument Laboratory, Inc. | Product Releases | CommentsThis series of sub-miniature manifolds is offered for the 10 and 15 mm solenoid valves. Their extremely small size allows for groupings of valves in very small spaces. These single-sided units are available with 2, 4, 6, 8, 10, 12, 14, and 16 stations.
LISTED UNDER: Miniature Valve | Miniature Valve | Solenoid Valve
Actuator Acts as Both Motor and Diaphragm
November 10, 2008 6:52 am | Adaptivenergy Llc | Product Releases | CommentsThe proprietary RLP-125 actuator acts as both the motor and the diaphragm in liquid movement applications. The actuator may be embedded directly in a fluidic backplane to provide highly reliable pumping action with minimal impact on design architecture.
LISTED UNDER: Actuators | Diaphragm Pump
Connector Offers Secure Contact Retention
November 10, 2008 6:52 am | Molex | Product Releases | CommentsThis 0.25 mm pitch FPC connector saves up to 40% of space compared to similar 0.3 mm pitch connectors.
LISTED UNDER: Connectors
Tubing & Hose Catalogs
November 10, 2008 6:52 am | Product Releases | CommentsNewAge Industries Inc. offers nine new product catalogs featuring its plastic tubing, rubber hose, fittings, clamps, and custom services manufactured for a wide variety of industries and uses.
LISTED UNDER: Rubber | Fittings | Silicone
Fluid Management Components Catalog
November 10, 2008 6:52 am | Product Releases | CommentsValue Plastics catalog contains detailed information on thousands of products and includes all new products recently introduced.
LISTED UNDER: Connectors
Improved Thermal Material Are Offered for Die-Cutting
November 10, 2008 6:52 am | Fujipoly America Corp. | Product Releases | CommentsSarcon GR-Fd thermal interface gap filler pad is a unique gel-like material. It is manufactured with an integrated nylon mesh layer that prevents distortion and stretching during die-cut operations.
LISTED UNDER: Other
Fully Shrouded Headers Help Eliminate Mismating
November 10, 2008 6:52 am | Product Releases | CommentsFully shrouded post headers, available in two through 12 positions, have been added to the popular Economy Power (EP) connector family. Intended for secondary power circuit applications, the through-hole headers have a current-carrying capacity of 7.5 A maximum per contact.
LISTED UNDER: ConnectorsHandling the Pressure
November 10, 2008 6:52 am | by Michael Hansen, Ph.D. | Articles | CommentsThe Project: Create a handle for a defibrillator durable enough to withstand exceptional performance requirements. The Solution: Use computer-aided engineering and various flow simulation software to ensure that the final product met the specific characteristics necessary for success.
LISTED UNDER: Product Design & MFG Software | Injection Molding | Flow
