Advertisement

M12 Socket Connectors Provided With Profibus Cable

December 5, 2008 7:04 am | Product Releases | Comments

The M12 shielded panel-mounted male or female connector is pre-assembled for Profibus and Ethernet users. The receptacle is attached to a shielded cable with a twisted pair of AWG 22 wires. The Profibus receptacles are available in front- or rear-mount design for mounting to control cabinets.

LISTED UNDER: Connectors | Wire and Cable

Ball Valves Offer Miniaturization Solutions

December 5, 2008 7:04 am | Beswick Engineering Co., Inc. | Product Releases | Comments

These sub-miniature ball valves are offered in two standard configurations. The MBV-1010-303 is the answer for designers requiring an On/Off valve, while the MBVT-1010-303 is for applications requiring the selection of one of two possible flow paths. These valves weigh only 9.

LISTED UNDER: Ball | Miniature Valve | Flow

Circular Nano Connectors Available With Custom Overmolding

December 5, 2008 7:03 am | Omnetics Connector Corp. | Product Releases | Comments

Company offers a custom molding service on its newly-introduced nano circular connectors. Medical and other high reliability applications are designing equipment that requires the electrical connectors to be molded into equipment housings.

LISTED UNDER: Connectors
Advertisement

Micro-Dispense Nozzles

November 11, 2008 5:34 am | The Lee Company | Product Releases | Comments

Micro-dispense nozzles provide a convenient method of accurately controlling dispensed volumes when used in conjunction with the company’s VHS (Very High Speed) Micro-Dispense Valves.

LISTED UNDER: Dispense | Control

Sub-Miniature Manifolds for Solenoid Valves

November 10, 2008 6:53 am | Clippard Instrument Laboratory, Inc. | Product Releases | Comments

This series of sub-miniature manifolds is offered for the 10 and 15 mm solenoid valves. Their extremely small size allows for groupings of valves in very small spaces. These single-sided units are available with 2, 4, 6, 8, 10, 12, 14, and 16 stations.

LISTED UNDER: Miniature Valve | Miniature Valve | Solenoid Valve

Actuator Acts as Both Motor and Diaphragm

November 10, 2008 6:52 am | Product Releases | Comments

The proprietary RLP-125 actuator acts as both the motor and the diaphragm in liquid movement applications. The actuator may be embedded directly in a fluidic backplane to provide highly reliable pumping action with minimal impact on design architecture.

LISTED UNDER: Actuators | Diaphragm Pump

Connector Offers Secure Contact Retention

November 10, 2008 6:52 am | Molex | Product Releases | Comments

This 0.25 mm pitch FPC connector saves up to 40% of space compared to similar 0.3 mm pitch connectors.

LISTED UNDER: Connectors

Fluid Management Components Catalog

November 10, 2008 6:52 am | Product Releases | Comments

Value Plastics catalog contains detailed information on thousands of products and includes all new products recently introduced.

LISTED UNDER: Connectors
Advertisement

Tubing & Hose Catalogs

November 10, 2008 6:52 am | Product Releases | Comments

NewAge Industries Inc. offers nine new product catalogs featuring its plastic tubing, rubber hose, fittings, clamps, and custom services manufactured for a wide variety of industries and uses.

LISTED UNDER: Rubber | Fittings | Silicone

Improved Thermal Material Are Offered for Die-Cutting

November 10, 2008 6:52 am | Product Releases | Comments

Sarcon GR-Fd thermal interface gap filler pad is a unique gel-like material. It is manufactured with an integrated nylon mesh layer that prevents distortion and stretching during die-cut operations.

LISTED UNDER: Other

Fully Shrouded Headers Help Eliminate Mismating

November 10, 2008 6:52 am | Product Releases | Comments

Fully shrouded post headers, available in two through 12 positions, have been added to the popular Economy Power (EP) connector family. Intended for secondary power circuit applications, the through-hole headers have a current-carrying capacity of 7.5 A maximum per contact.

LISTED UNDER: Connectors

SMT Connectors Suited for High Reliability Applications

October 13, 2008 12:07 pm | Advanced Interconnections Corp. | Product Releases | Comments

The Mezza-pede 1.0 mm SMT connectors are designed for 1.0 mm pitch micro board-to-board and flex cable-to-board applications. The screw-machined, low profile Mezza-pede connector system is especially suited for high reliability applications. With a mated height of only 4.

LISTED UNDER: Connectors

Flexible Tubing Handles Temperature Fluctuations

October 9, 2008 6:06 am | Product Releases | Comments

Designed to endure temperature extremes, medical-grade silicone tubing handles temperature variations from -100°F to 400°F; braid-reinforced hose from -80°F to 350°F. Both offer translucency for visual contact with the flow and excellent bend radii for restricted space applications.

LISTED UNDER: Silicone

PVC Coiled Tubing Is DEHP-Free, USP Class VI

October 9, 2008 6:06 am | Qosina | Product Releases | Comments

This DEHP-free, USP Class VI, PVC coiled tubing stretches and retracts easily, keeping it tangle-free and space efficient. While the actual size of the coiled piece is between 5.0 and 6.0 cm, the tubing extends to lengths of 91 cm (36 inches) (Part #89315) or 122 cm (48 inches) (Part # 89316).

LISTED UNDER: PVC Tubing | PVC Tubing

Insert Replaces Nuts and Ferrules for Easier Tubing Connections

October 9, 2008 6:06 am | Colder Products Company | Product Releases | Comments

This ¼-28 UNF thread has been added to the PMC12 product line. The coupling insert is designed to allow users to easily incorporate quick disconnect technology into existing ¼-28 flat bottom ports and small-diameter tubing applications.

LISTED UNDER: Connectors

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading