Pin Connectors
October 9, 2007 11:24 am | Onanon | Product Releases | CommentsCompliant pin technology has stood the test of time by providing press-fit connections that withstands thermal shock, vibration, and humidity.
LISTED UNDER: ConnectorsFive Basic Steps to Proper Membrane Selection
September 10, 2007 9:47 am | Articles | CommentsSelecting a membrane to use with a medical device seems like a relatively simple enough process, however, without careful consideration of a number of key factors, a device can fail as a result of an improper choice.
LISTED UNDER: MembraneConnection Selection: Identifying Fluid Connector Options
September 10, 2007 9:47 am | Colder Products Company | Articles | CommentsSelecting the right fluid line connector can boost performance and bring enhanced benefits to a medical device. However, with a variety of choices between fittings, luers, and couplings, it is difficult to know which offering would be best indicated for a specific application.
LISTED UNDER: Connectors | Flow | Fittings
CAN-Ethernet Gateway
September 10, 2007 9:46 am | Esd Electronics, Inc | Product Releases | CommentsEtherCAN is a CAN-ethernet gateway that converts from CAN into ethernet to overcome the limited physical length of CAN networks. Since CAN technology was originally developed for the automotive industry, it has limitations for high-speed data transmission (1 MBit/sec) at distances of over 50 ft.
LISTED UNDER: Connectors
Micro Solenoid Valves
September 10, 2007 6:53 am | Humphrey Products Company | Product Releases | CommentsThe 401 Series direct acting micro solenoid valves are compact and offer a field-proven poppet design for reliability. The valves are 10 mm wide; have a five port, 4-way configuration; and are available as single solenoid.
LISTED UNDER: Solenoid Valve | Solenoid Valve
Protective Connector Caps
September 10, 2007 6:53 am | Binder Usa | Product Releases | CommentsM8 protective caps, when applied to unmated connectors, ensure a protection rating of IP67. The caps feature a PA (polyamide) body, PUR (polyurethane) retaining strap, and a nitrile rubber (NBR) seal—a common material used for o-rings.
LISTED UNDER: Connectors
Pumphead (4329)
September 10, 2007 6:53 am | Watson Marlow Pumps Group | Product Releases | CommentsThe easy-to-load 313D pumphead is offered for blood processing applications. It accepts seven different tube sizes for a flow range of 0.25 to 3,000 ml/min, and pressures up to 30 psi. The easy tube loading feature enables the 313D to provide foolproof loading and minimal downtime.
LISTED UNDER: Peristaltic | Flow
Medical Connector Line
August 10, 2007 5:14 am | Product Releases | CommentsThis line of circular plastic connectors (CPC), named CPC – Medical, is designed for use in surgical instruments, RF and ultrasound ablation, and electronic patient monitors used in the operating room.
LISTED UNDER: Connectors
Medical Battery Pack
August 10, 2007 5:14 am | Micro Power Electronics, Inc. | Product Releases | CommentsThese advanced medical battery packs can withstand autoclave sterilization. They can tolerate temperatures up to 137°C and are impermeable to 30 PSI of superheated steam.
LISTED UNDER: Batteries and Accessories | Gas Valve
Disposable Connector
August 10, 2007 5:14 am | Fischer Connectors, Inc. | Product Releases | CommentsThe high performance and low cost Limited Use Connector (L.U.C.) is ideally suited for the demanding environment of today’s high tech operating rooms. The disposable L.U.C. provides excellent quality allowing the medical design engineer to create a solution that ensures reliability and ease of use.
LISTED UNDER: Connectors
Connector (4233)
August 10, 2007 5:14 am | Anderson Materials Evaluation | Product Releases | CommentsIdeal for medical applications, the multi axial rotational connector (MARC) is designed to mate while traveling through an arc with a 3-inch minimum radius. The MARC is rated to 30 Amps while combining power, signal, and ground circuitry into one package.
LISTED UNDER: Connectors
Peristaltic Pump (4223)
August 10, 2007 5:11 am | Watson Marlow Pumps Group | Product Releases | CommentsThe 400 F/A matchbox-size peristaltic pumps are smaller and more cost effective than syringe pumps, enabling the designer to place them anywhere on an instrument, saving them space and reducing costs.
LISTED UNDER: Peristaltic | Flow | Peristaltic
Solenoid Valves (4211)
August 10, 2007 5:11 am | Spartan Scientific | Product Releases | CommentsThe 3B23, 4B23, and 4BKR series of media separated solenoid valves are designed to create a contamination barrier and to control the flow of ultra pure or corrosive materials.
LISTED UNDER: Solenoid Valve | Control | Flow
Flowswitches
August 10, 2007 5:11 am | Orange Research | Product Releases | CommentsAdjustable and fixed set-point flowswitches are designed for applications involving high line pressures ranging from 1,000 to 5,000 psig. The adjustable liquid and air/gas flowswitches are available with optional dials and can be installed vertically or horizontally.
LISTED UNDER: Other
Filters Website
July 5, 2007 12:15 pm | Product Releases | CommentsThe new website for Universal Air Filter is easier for design engineers to navigate to help them save valuable time and money. Seven of the most popular design applications are featured on separate landing pages to find specific information faster and more efficiently.
LISTED UNDER: Air Filter
