Advertisement

Lubricant Dispensing

December 10, 2007 9:53 am | I & J Fisnar, Inc. | Product Releases | Comments

Machine parts that require constant lubricating of their surface areas, such as gears and rollers, can be serviced by the use of a precision spray valve and sequence controller.

LISTED UNDER: Dispensers/Fillers | Control

Light Sensitive Extension Line

December 10, 2007 9:53 am | Qosina | Product Releases | Comments

Light sensitive extension lines have been added to the company’s expanding inventory of sub-assembled components. These extension lines with amber tubing effectively protect light sensitive solutions or compounds. The 40 inches long polyethylene tubing is available in 1.5 mm I.D. by 2.5 mm O.D.

LISTED UNDER: Polyethylene

Solenoid Valves (4573)

December 10, 2007 9:52 am | Humphrey Products Company | Product Releases | Comments

The set screw and pushrod assembly in the Model 310/410 direct-acting solenoid valves has been redesigned to improve performance over the life of the valve. These two pieces were redesigned into a single threaded pushrod which eliminates the opportunity for wear between the two parts.

LISTED UNDER: Solenoid Valve | Solenoid Valve
Advertisement

Connection Fittings

November 13, 2007 6:38 am | Diba Industries, Inc. | Product Releases | Comments

Over-tightening fittings results in poor fluid connections and leaky processing. Click-N-Seal connection fittings eliminate this process variable by providing objective feedback that the required torque for a proper seal has been achieved, thereby preventing excess torque.

LISTED UNDER: Connectors | Fittings

Extrusion Capabilities

November 5, 2007 9:11 am | Vesta, Inc. | Product Releases | Comments

The company’s extensive extrusion capabilities range from single-lumen tubing to coextrusions and multi-lumen tubing, with up to 28 lumens or more possible. Formulations range from clear to pigmented to radiopaque.

LISTED UNDER: Extrusion | Multilumen Tubing | Coextrusions/Paratubing

Medical Interconnects

November 5, 2007 9:11 am | Tru Corporation | Product Releases | Comments

Custom RF medical interconnects are engineered to customer requirements for solving problems relative to broadband RF frequency performance, power levels, magnetic shielding, materials, size, and connectivity.

LISTED UNDER: Connectors | Cable Assemblies

Silicone Hose (4517)

November 5, 2007 9:11 am | AdvantaPure | Product Releases | Comments

APSM reinforced silicone hose is now offered in custom colors for easy line recognition. Previously available only in white, APSM is used for applications involving elevated pressure levels in pharmaceutical, bioprocess, and biomedical fluid transfer.

LISTED UNDER: Silicone

Occlusion Sensors

November 5, 2007 9:10 am | Strain Measurement Devices, Inc. | Product Releases | Comments

The occlusion sensor is a thin film force sensor used in ambulatory infusion pumps, insulin pumps, and enteral feeding pumps to measure occlusions (blockages) in silicone or PVC tubing.

LISTED UNDER: Others | PVC Tubing
Advertisement

Socket Interconnects

November 5, 2007 9:09 am | Product Releases | Comments

These versatile socket interconnects are for 0.025 pin diameter and 0.025 square pins in both single and double rows. The receptacles are precision-machined from brass alloy and assembled with our #16 contact&#151six-finger contact clips designed to accept mated pin ranges from 0.022 to 0.

LISTED UNDER: Connectors

Latching Connectors (4477)

November 5, 2007 9:09 am | Omnetics Connector Corp. | Product Releases | Comments

These circular connectors are available heavily keyed and with mechanical latches, enabling them to withstand pulling forces of up to 5 lbs in a straight line. No special tools are required for mating and unmating, and the design of the connectors further ensures no mis-mating.

LISTED UNDER: Connectors

FDA Compliant Tubing

October 11, 2007 10:01 am | Parker Texmed | Product Releases | Comments

Medical tubing is available in Texflour PTFE, FEP, PFA, ETFE, and PEEK and is offered in a variety of products and sizes. Compounds of filled barium sulfate, bismuth trioxide, and other additives are available to allow X-Ray viewing of medical devices.

LISTED UNDER: PTFE | Multilumen Tubing

Plastic Extruded Tubes

October 11, 2007 10:01 am | Medical Precision Plastics, Inc. | Product Releases | Comments

The company is an ISO certified manufacturer of custom plastic extruded tubes. It ships to 15 countries on five continents, is GMP compliant, has complete two-way product traceability, and can provide product certification on all shipments.

LISTED UNDER: Coextrusions/Paratubing

SMT Connectors

October 11, 2007 9:43 am | Product Releases | Comments

To meet the growing market demand of smaller electronic devices, the SlimStack product line now includes J-Lead SMT connectors. These board-to-board connectors feature a “J”-shaped SMT tail that provides 35% PCB width space savings versus standard gull-wing style tails.

LISTED UNDER: Connectors

Custom Electrical Terminals

October 11, 2007 9:43 am | Product Releases | Comments

Custom electrical terminals for overmolded medical devices are manufactured to specification for integration with discrete component overmolding and are supplied on reels or loose for use with various automation systems. Produced in sizes from 0.008 to 0.09 in. thick with &#1770.002 in.

LISTED UNDER: Connectors

Pneumatic Valves (4401)

October 9, 2007 11:24 am | Clippard Instrument Laboratory, Inc. | Product Releases | Comments

Available in 2-way or 3-way, normally-closed or fully ported, these electronic valves are designed for use with oxygen applications and will work with air and inert gas. The “O-E” Series pneumatic valves utilize a unique patented valve system that has been used and proven throughout many industries.

LISTED UNDER: Other | Gas Valve

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading