Advertisement

Socket Interconnects

November 5, 2007 9:09 am | Product Releases | Comments

These versatile socket interconnects are for 0.025 pin diameter and 0.025 square pins in both single and double rows. The receptacles are precision-machined from brass alloy and assembled with our #16 contact&#151six-finger contact clips designed to accept mated pin ranges from 0.022 to 0.

LISTED UNDER: Connectors
Advertisement

FDA Compliant Tubing

October 11, 2007 10:01 am | Parker Texmed | Product Releases | Comments

Medical tubing is available in Texflour PTFE, FEP, PFA, ETFE, and PEEK and is offered in a variety of products and sizes. Compounds of filled barium sulfate, bismuth trioxide, and other additives are available to allow X-Ray viewing of medical devices.

LISTED UNDER: PTFE | Multilumen Tubing

Plastic Extruded Tubes

October 11, 2007 10:01 am | Medical Precision Plastics, Inc. | Product Releases | Comments

The company is an ISO certified manufacturer of custom plastic extruded tubes. It ships to 15 countries on five continents, is GMP compliant, has complete two-way product traceability, and can provide product certification on all shipments.

LISTED UNDER: Coextrusions/Paratubing

SMT Connectors

October 11, 2007 9:43 am | Product Releases | Comments

To meet the growing market demand of smaller electronic devices, the SlimStack product line now includes J-Lead SMT connectors. These board-to-board connectors feature a “J”-shaped SMT tail that provides 35% PCB width space savings versus standard gull-wing style tails.

LISTED UNDER: Connectors

Custom Electrical Terminals

October 11, 2007 9:43 am | Product Releases | Comments

Custom electrical terminals for overmolded medical devices are manufactured to specification for integration with discrete component overmolding and are supplied on reels or loose for use with various automation systems. Produced in sizes from 0.008 to 0.09 in. thick with &#1770.002 in.

LISTED UNDER: Connectors

Pneumatic Valves (4401)

October 9, 2007 11:24 am | Clippard Instrument Laboratory, Inc. | Product Releases | Comments

Available in 2-way or 3-way, normally-closed or fully ported, these electronic valves are designed for use with oxygen applications and will work with air and inert gas. The “O-E” Series pneumatic valves utilize a unique patented valve system that has been used and proven throughout many industries.

LISTED UNDER: Other | Gas Valve

Pin Connectors

October 9, 2007 11:24 am | Onanon | Product Releases | Comments

Compliant pin technology has stood the test of time by providing press-fit connections that withstands thermal shock, vibration, and humidity.

LISTED UNDER: Connectors

PTFE Terminals

October 9, 2007 11:24 am | Keystone Electronics Corp. | Product Releases | Comments

Engineered for high density packaging on 0.062 and 0.093(TH) PC boards, these PTFE terminals provide outstanding electrical, mechanical, thermal, and chemical characteristics. Rugged and resistant to mechanical shock and vibration, they operate within the temperature range of -85&#176F to 400&#176F.

LISTED UNDER: Connectors

CAN-Ethernet Gateway

September 10, 2007 9:46 am | Esd Electronics, Inc | Product Releases | Comments

EtherCAN is a CAN-ethernet gateway that converts from CAN into ethernet to overcome the limited physical length of CAN networks. Since CAN technology was originally developed for the automotive industry, it has limitations for high-speed data transmission (1 MBit/sec) at distances of over 50 ft.

LISTED UNDER: Connectors

Protective Connector Caps

September 10, 2007 6:53 am | Binder Usa | Product Releases | Comments

M8 protective caps, when applied to unmated connectors, ensure a protection rating of IP67. The caps feature a PA (polyamide) body, PUR (polyurethane) retaining strap, and a nitrile rubber (NBR) seal&#151a common material used for o-rings.

LISTED UNDER: Connectors

Micro Solenoid Valves

September 10, 2007 6:53 am | Humphrey Products Company | Product Releases | Comments

The 401 Series direct acting micro solenoid valves are compact and offer a field-proven poppet design for reliability. The valves are 10 mm wide; have a five port, 4-way configuration; and are available as single solenoid.

LISTED UNDER: Solenoid Valve | Solenoid Valve

Pumphead (4329)

September 10, 2007 6:53 am | Watson Marlow Pumps Group | Product Releases | Comments

The easy-to-load 313D pumphead is offered for blood processing applications. It accepts seven different tube sizes for a flow range of 0.25 to 3,000 ml/min, and pressures up to 30 psi. The easy tube loading feature enables the 313D to provide foolproof loading and minimal downtime.

LISTED UNDER: Peristaltic | Flow

Medical Connector Line

August 10, 2007 5:14 am | Product Releases | Comments

This line of circular plastic connectors (CPC), named CPC – Medical, is designed for use in surgical instruments, RF and ultrasound ablation, and electronic patient monitors used in the operating room.

LISTED UNDER: Connectors

Connector (4233)

August 10, 2007 5:14 am | Anderson Materials Evaluation | Product Releases | Comments

Ideal for medical applications, the multi axial rotational connector (MARC) is designed to mate while traveling through an arc with a 3-inch minimum radius. The MARC is rated to 30 Amps while combining power, signal, and ground circuitry into one package.

LISTED UNDER: Connectors

Medical Battery Pack

August 10, 2007 5:14 am | Micro Power Electronics, Inc. | Product Releases | Comments

These advanced medical battery packs can withstand autoclave sterilization. They can tolerate temperatures up to 137&#176C and are impermeable to 30 PSI of superheated steam.

LISTED UNDER: Batteries | Gas Valve | Batteries

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading