Industrial Air Compressor
May 2, 2006 8:29 am | Sullair Corp. | Product Releases | CommentsA series of air compressors—the Sullair 3000, Sullair 3700, and Sullair 4500—offer 40, 50, and 60 horsepower and are designed for point-of-use facility installations.
LISTED UNDER: Air Pump | Compressor
Pressure Control Module
May 2, 2006 8:29 am | Product Releases | CommentsThe VSO-EP is a module for precision control of critical system pressures. It is an automated alternative to manual pressure regulators, needle valves, flow controllers, and bleed orifices, providing integral closed-loop proportional control for both dynamic and “set and forget” applications.
LISTED UNDER: Pressure/Vacuum | Proportional | Control
Concentrator Valve Assembly
May 2, 2006 8:29 am | Humphrey Products Company | Product Releases | CommentsA manufacturer of O 2 concentrators for in-home oxygen therapy wanted a unit that would simultaneously fill portable bottles while supplying the patient.
LISTED UNDER: Other | Flow | Solenoid Valve
Mix-Dispense Valve
May 2, 2006 8:29 am | Sealant Equipment & Engineering, Inc. | Product Releases | CommentsThe Model 2200-545-037 two-component miniature mix-dispense valve precisely dispenses miniature beads and very small volumes of low-viscosity pourable materials and abrasive or filled materials.
LISTED UNDER: Dispense | Miniature Valve | Flow
Pneumatic Valves
May 2, 2006 8:29 am | Clippard Instrument Laboratory, Inc. | Product Releases | CommentsMaximatic 3-way, 4-way, single and double solenoid, and 3-way and 4-way air piloted valves are available in many sizes and variations for a wide range of applications. Specified, tested, and backed by the company, these quality manufactured imported valves are available in sizes from #10-32 to ½ in.
LISTED UNDER: Solenoid Valve | Flow | Solenoid Valve
ZIF Connectors
May 2, 2006 8:29 am | Itt Electronic Components | Product Releases | CommentsThe Cannon DLP series of Zero Insertion Force (ZIF) connectors provide greater contact reliability and reduced signal crosstalk. With a minimum rated life of 10,000 mate/unmate cycles and no loss in performance, DLP series connectors can be mated/unmated in less than two seconds.
LISTED UNDER: Connectors
Braid Reinforced Hose
May 2, 2006 8:28 am | Newage Industries, Inc. | Product Releases | CommentsCompany recently made improvements in its manufacturing processes and realized increased capacity for its braided hose production lines.
LISTED UNDER: Reinforced
Silicone Dispensing Tube
May 2, 2006 8:28 am | Watson Marlow Pumps Group | Product Releases | CommentsPumpsil-D platinum silicone dispensing tube is specially formulated and designed specifically for high accuracy dispensing applications in the biopharmaceutical industry.
LISTED UNDER: Silicone
Quick Disconnects
May 2, 2006 8:28 am | Beswick Engineering Co., Inc. | Product Releases | CommentsThis ultra-miniature M3 threaded quick disconnect assembly is comprised of a brass internal end and a stainless steel external end. The entire assembly weighs only 3.4 grams. The internal end is designed with an automatic shut-off valve and an M3 internal thread. It is only about 16.
LISTED UNDER: Fittings | Miniature Valve
Signal Tap Box
April 18, 2006 6:57 am | Bioconnect | Product Releases | CommentsThis signal tap box, part number 7B5311D0, is designed to tap a signal from a standard 10-lead EEG signal for strip chart recording, saving to an electronic file or “out of the room evaluation” such as a sleep lab. Lead length, wiring configurations, connectors, and labels can be customized.
LISTED UNDER: Connectors
Dispensing System (2953)
April 6, 2006 7:32 am | Fluid Metering, Inc. | Product Releases | CommentsThe Smooth-flo fluid delivery system is a fully programmable dispensing system which is controlled by precision stepper motors. The phase-canceling technology uses three separate valveless pump heads, uniquely timed, to eliminate pulsation.
LISTED UNDER: Dispensers/Fillers | Control
Hypotube
April 6, 2006 7:32 am | Creganna-Tactx Medical | Product Releases | CommentsThe PoleVault is an innovative hypotube for catheter manufacturers seeking to improve outcomes for patients undergoing angioplasty. The hypotube is a long metal tube with micro-engineered features along its length.
LISTED UNDER: Metal
Miniature Connectors
April 6, 2006 7:25 am | Product Releases | CommentsThis line of Mini-HMC heavy-duty connectors provides up to a 65% space savings for applications such as small robots, industrial controls, factory automation, production, and medical equipment.
LISTED UNDER: ConnectorsEmphasis on Disposables:Disposable Interconnect Solutions Aid in Creating Enhanced Treatment Options
April 4, 2006 12:16 pm | Hypertronics | Product Releases | CommentsThe use of reliable interconnect technology enables minimally invasive disposable electronic probes to be utilized in a greater number of procedures and harsher environments. The following article examines this technology and how it can provide additional benefits to a complete connector system.
LISTED UNDER: Connectors | Cable AssembliesSilicone Elastomers for Healthcare Tubing
April 4, 2006 7:38 am | Momentive Performance Materials Inc. | Product Releases | CommentsWith the variety of tubing options available to medical device manufacturers, it is often difficult to determine which type would be best suited to a particular application.
LISTED UNDER: Silicone | Vacuum | Injection Molding
