Advertisement

Solenoid Valves (3379)

September 7, 2006 5:49 am | Humphrey Products Company | Product Releases | Comments

The HEA/HEB series solenoid valves are thin, compact, and can be configured in many different ways for design flexibility to meet a variety of application requirements, including high pressure operation. The valves are 10 mm wide, deliver a 0.

LISTED UNDER: Solenoid Valve | Flow | Solenoid Valve
Advertisement

Strain Relief Clamps

September 7, 2006 5:49 am | Product Releases | Comments

Strain relief clamps are made from heavy galvanized steel and clamp onto a cable or cord inside the equipment to protect the cord from damage caused by pulling or stretching.

LISTED UNDER: Clamping Devices

Blender

September 7, 2006 5:49 am | Optek Technology | Product Releases | Comments

While the MicroPlus blender accommodates processing machine throughputs of 100 to 350 pounds per hour instead of the 100-pound maximum of the widely used MicroBlender, it provides the same user-friendly features for reducing downtime during color or job changeovers.

LISTED UNDER: Molding Equipment | Flow

Pneumatic Products Catalog

September 7, 2006 5:12 am | Product Releases | Comments

MFD Pneumatics offers this 20-page pneumatic products catalog, focusing on product lines specific to the OEM’s low cost, quality component requirements.

LISTED UNDER: Cylinders | Control

Choosing a Vent Membrane for a Medical Device

September 5, 2006 7:16 am | Millipore Corporation | Product Releases | Comments

Hydrophobic polymeric membranes are widely used in medical devices to sterilize gases which pass through them or to provide sterile barriers between the atmosphere and device interiors.

LISTED UNDER: PTFE | Insert Molding | Micro Molding

Aluminum Gas Cylinders

August 25, 2006 6:15 am | Cyl-Tec, Inc. | Product Releases | Comments

Aluminum gas cylinders are available for medical O2 applications. The aluminum cylinders are as much as 50% lighter than traditional steel cylinders, making them easier to carry and handle.

LISTED UNDER: Other Supplies | Cylinders | Gas Valve

Thermocouple Contact Connectors

August 8, 2006 12:51 pm | Positronic | Product Releases | Comments

High reliability thermocouple contacts are offered for standard and high-density D-subminiature as well as circular connector products. The thermocouple contact line has recently been extended to include combination D-subminiature connectors.

LISTED UNDER: Connectors

Cartridge Needle Valve

August 8, 2006 12:51 pm | Beswick Engineering Co., Inc. | Product Releases | Comments

This miniature cartridge needle valve is offered for precise flow adjustment in an extremely compact package. The product can be used to control mini-cylinders, nozzles, timing circuits, filling heads, bleed vents, and in many other applications.

LISTED UNDER: Needle | Cylinders | Miniature Valve

UV Resistant Tubing

August 8, 2006 12:51 pm | Parker Texmed | Product Releases | Comments

Fluoropolymer tubing products are available for a variety of fluid handling applications. Unique characteristics of fluoropolymer tubing include exceptional heat and UV resistance, as well as an extremely low co-efficient of friction.

LISTED UNDER: Fluoroplastic

Custom Flow Tubes

August 8, 2006 12:51 pm | Andrews Glass Company | Product Releases | Comments

Custom flow tubes are manufactured to customer specifications. These custom flow tubes meet exacting industry standards and are tested to assure that they satisfy individual customer requirements. The company has the ability to develop tooling needed to reproduce existing flow tubes.

LISTED UNDER: Glass Tubing

Miniature Medical Connectors (3233)

August 8, 2006 12:50 pm | Omnetics Connector Corp. | Product Releases | Comments

Medical connectors need to be small, lightweight, and comfortable in use, but built for rugged handling and extended performance and reliability. These miniature medical interconnects suit those needs. Standard and custom designs and shapes have been applied to catheters, probes, and instruments.

LISTED UNDER: Connectors | Prototyping

Air Filter Prototypes

August 8, 2006 12:50 pm | Product Releases | Comments

Universal Air Filter can help design engineers meet their deadlines by providing a free “to specification” air filter prototype ready for testing and evaluation. This free, round-the-clock service is available to design engineers worldwide.

LISTED UNDER: Air Filter

Embedded High Performance Analog Simplifies Portable Medical Design

August 4, 2006 7:17 am | Product Releases | Comments

As more portable electronic medical devices are introduced to monitor and treat patients, manufacturers are seeking technologies with which to reduce the complexity involved in the design of the finished product.

LISTED UNDER: Microprocessor-Based Controls | Medical Device Testing | Component Testing

Internal Form and Finish Critical to Manufacture of Heart Pump

August 4, 2006 7:17 am | Mitutoyo America Corporation | Product Releases | Comments

The Project: Verify that geometry and surface texture of the housing for a heart pump will facilitate smooth functioning while not adversely affecting blood. The Solution: Use extremely accurate instrumentation to measure form and surface to ensure they are compliant with specifications.

LISTED UNDER: Measurement Instruments | Biocompatibility Testing | Microbiology/Chemical Testing

Foam Expands Material Choices for Medical Device Manufacturers

August 4, 2006 7:17 am | The United Group | Product Releases | Comments

Reticulated polyurethane foam handles a wide range of medical and healthcare tasks with ease in devices ranging from blood oxygenators, transdermal patches, and EKG pads to pre-op sponges, surgical drapes, and neck braces.

LISTED UNDER: Foam | Compressor | Medical Device Testing

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading