Fan Filters
March 9, 2006 12:10 pm | Universal Air Filter Co. | Product Releases | CommentsMeet thermal management and air filtration requirements for blowers and fans—axial flow, cross flow, intelligent fan packs, pancake styles—with low-profile, low-air resistance filters.
LISTED UNDER: Air Pump
Circular Connectors
March 9, 2006 12:10 pm | Omnetics Connector Corp. | Product Releases | CommentsDesigned to save space and weight while increasing interconnect reliability with Mil Spec material, these microminiature circular connectors are used in medical applications. They are ready for overmolding and insertion into handheld probes and instruments.
LISTED UNDER: Connectors | Micro Molding | Insert Micro Molding
Power Entry Module (2901)
March 9, 2006 12:10 pm | Schurter, Inc. | Product Releases | CommentsThe DF series circuit breaker and AC inlet combination offers a recessed switch to prevent accidental actuation. The combination saves space and is pre-wired for quick installation. The DF12 offers both standard and medical type filters.
LISTED UNDER: Switches/Pushbuttons | Metal Filter
Gas Metering Valve (2891)
March 9, 2006 12:10 pm | South Bend Controls, Inc. | Product Releases | CommentsThe gas metering valve is a direct-acting proportional Servoid valve. The Servoid valve driver provides linear proportional control of the metering orifice which yields linear proportional flow.
LISTED UNDER: Other | Proportional | Control
IV Check Valve
March 8, 2006 9:41 am | Filtertek Inc. | Product Releases | CommentsThis specialized check valve provides both anti-siphon and anti-free-flow protection. It is designed for use in IV pump systems where risk of free flow or retrograde flow is a consideration. The valve’s omni-directional design allows for error-free assembly into the OEM’s infusion sets.
LISTED UNDER: Check Valves | Flow
Silicone Tubing (2813)
February 9, 2006 8:45 am | Kent Elastomer Products, Inc. | Product Releases | CommentsIdeal for applications where high temperature stability is not vital, translucent K-4156 offers a low coefficient of friction, good vapor and gas permeability, ease of sterilization, and good chemical resistance. The tubing has a durometer range of 49 at ۯ.
LISTED UNDER: Silicone
Latching Connectors
February 9, 2006 8:45 am | Omnetics Connector Corp. | Product Releases | CommentsLatching connectors on 0.05 in. centerlines are easy to use and require no tools for engagement and disengagement. Conforming to the requirements of MIL-DTL-83513, these connectors meet a wide variety of application requirements.
LISTED UNDER: Connectors
Miniature Power/Signal Connector
February 9, 2006 8:45 am | Positronic Industries, Inc. | Product Releases | CommentsThe Dragonfly series is ideal for use in applications requiring a high reliability miniature connector, which offers signal and/or power contacts. It offers contact current ratings of 20 amperes continuous for size 16 contacts. Size 20 contacts are rated at 12 amperes when used with 18 AWG wire.
LISTED UNDER: Connectors
Dispense Valve (2807)
February 9, 2006 8:45 am | Sealant Equipment & Engineering, Inc. | Product Releases | CommentsThe model 2200-245-125 Tip-Seal dispense valve is designed for precision dispensing of low- to high-viscosity flowable materials. It is also used in high-speed stitching or repetitive on-off applications where short segments of material are deposited onto a surface.
LISTED UNDER: Dispense | Flow | Silicone
Gas Plasma System
February 8, 2006 5:57 am | Plasmatech, Inc. | Product Releases | CommentsThe A400 gas plasma system has a 16 x 16 x 19 in. aluminum chamber, is clean room compatible, and available in both table-top and tall free-standing cabinet versions. Gas introduction via mass flow controllers and magnetic valves ensures precise gas measurement.
LISTED UNDER: Surface Modification | Control | FlowEmphasis on Motion Control: Turning to Ball Screw Technology
February 7, 2006 5:39 am | Skf Usa Inc. | Product Releases | CommentsPrecise motion control is critical in a number of medical devices. Unfortunately, with the many options available to manufacturers, it is often difficult to know which solution is ideal for a particular application.
LISTED UNDER: Ball and Lead Screws | Heating Elements | Air Pump
Connector System (2705)
February 6, 2006 10:30 am | Fci | Product Releases | CommentsRoHS-compatible versions are available of the Conan 1.0 mm pitch, low-profile, board-stacking connector system.
LISTED UNDER: Connectors
Subminiature Connectors
February 6, 2006 10:29 am | Itt Industries | Product Releases | CommentsThe Grommet D range of D-subminiature connectors are a cost effective and high-density rectangular connector system equipped for the most extreme environmental conditions.
LISTED UNDER: Connectors
Capillary Luer Adapter
February 6, 2006 10:29 am | Upchurch Scientific | Product Releases | CommentsThis Luer-to-MicroTight adapter introduces no dead volume to the flow path and is ideal for infusing sample into lab-on-a-chip devices. Use it to directly connect a luer-tip syringe or other standard male luer to 360 µm O.D. capillary tubing without tubing sleeves.
LISTED UNDER: Luers
Rotary Selector Valves
February 6, 2006 10:29 am | Beswick Engineering Co., Inc. | Product Releases | CommentsThe selector valve can be used as a quiet replacement for solenoid valves. In the standard configuration; a single input can be switched between two to six output ports.
LISTED UNDER: Other
