Advertisement

Hose

May 2, 2006 1:08 pm | Product Releases | Comments

Flexible Hytrel style Type 888 hose features injection molded alloy cuffs that are made without adhesives to eliminate potential leakage and odors, and it can be sterilized by ETO gas, radiation, or pasteurization (275&#176F).

LISTED UNDER: Coextrusions/Paratubing

Mix-Dispense Valve

May 2, 2006 8:29 am | Product Releases | Comments

The Model 2200-545-037 two-component miniature mix-dispense valve precisely dispenses miniature beads and very small volumes of low-viscosity pourable materials and abrasive or filled materials.

LISTED UNDER: Dispense | Miniature Valve | Flow

Industrial Air Compressor

May 2, 2006 8:29 am | Product Releases | Comments

A series of air compressors&#151the Sullair 3000, Sullair 3700, and Sullair 4500&#151offer 40, 50, and 60 horsepower and are designed for point-of-use facility installations.

LISTED UNDER: Air Pump | Compressor
Advertisement

Pressure Control Module

May 2, 2006 8:29 am | Product Releases | Comments

The VSO-EP is a module for precision control of critical system pressures. It is an automated alternative to manual pressure regulators, needle valves, flow controllers, and bleed orifices, providing integral closed-loop proportional control for both dynamic and “set and forget” applications.

LISTED UNDER: Pressure/Vacuum | Proportional | Control

Butterfly Valve (3071)

May 2, 2006 8:29 am | Product Releases | Comments

The Type 57 Butterfly Valve incorporates four major design upgrades in thermoplastic valve technology. New design features include a flange stopper, which prevents the valve liner from over compression. A second feature is a molded body absorption channel.

LISTED UNDER: Other | Flow

Solenoid Valve (3077)

May 2, 2006 8:29 am | Product Releases | Comments

The 3B23 solenoid valve is designed for medical device applications that require media-separation such as dialysis machines, instrument cleaning devices, and dental irrigation equipment.

LISTED UNDER: Solenoid Valve | Flow | Solenoid Valve

Concentrator Valve Assembly

May 2, 2006 8:29 am | Product Releases | Comments

A manufacturer of O 2 concentrators for in-home oxygen therapy wanted a unit that would simultaneously fill portable bottles while supplying the patient.

LISTED UNDER: Other | Flow | Solenoid Valve

Pneumatic Valves

May 2, 2006 8:29 am | Clippard Instrument Laboratory, Inc. | Product Releases | Comments

Maximatic 3-way, 4-way, single and double solenoid, and 3-way and 4-way air piloted valves are available in many sizes and variations for a wide range of applications. Specified, tested, and backed by the company, these quality manufactured imported valves are available in sizes from #10-32 to ½ in.

LISTED UNDER: Solenoid Valve | Flow | Solenoid Valve
Advertisement

ZIF Connectors

May 2, 2006 8:29 am | Product Releases | Comments

The Cannon DLP series of Zero Insertion Force (ZIF) connectors provide greater contact reliability and reduced signal crosstalk. With a minimum rated life of 10,000 mate/unmate cycles and no loss in performance, DLP series connectors can be mated/unmated in less than two seconds.

LISTED UNDER: Connectors

Braid Reinforced Hose

May 2, 2006 8:28 am | Product Releases | Comments

Company recently made improvements in its manufacturing processes and realized increased capacity for its braided hose production lines.

LISTED UNDER: Reinforced

Quick Disconnects

May 2, 2006 8:28 am | Beswick Engineering Co., Inc. | Product Releases | Comments

This ultra-miniature M3 threaded quick disconnect assembly is comprised of a brass internal end and a stainless steel external end. The entire assembly weighs only 3.4 grams. The internal end is designed with an automatic shut-off valve and an M3 internal thread. It is only about 16.

LISTED UNDER: Fittings | Miniature Valve

Silicone Dispensing Tube

May 2, 2006 8:28 am | Watson Marlow Pumps Group | Product Releases | Comments

Pumpsil-D platinum silicone dispensing tube is specially formulated and designed specifically for high accuracy dispensing applications in the biopharmaceutical industry.

LISTED UNDER: Silicone

Signal Tap Box

April 18, 2006 6:57 am | Bioconnect | Product Releases | Comments

This signal tap box, part number 7B5311D0, is designed to tap a signal from a standard 10-lead EEG signal for strip chart recording, saving to an electronic file or “out of the room evaluation” such as a sleep lab. Lead length, wiring configurations, connectors, and labels can be customized.

LISTED UNDER: Connectors

Hypotube

April 6, 2006 7:32 am | Creganna-Tactx Medical | Product Releases | Comments

The PoleVault is an innovative hypotube for catheter manufacturers seeking to improve outcomes for patients undergoing angioplasty. The hypotube is a long metal tube with micro-engineered features along its length.

LISTED UNDER: Metal

Dispensing System (2953)

April 6, 2006 7:32 am | Fluid Metering, Inc. | Product Releases | Comments

The Smooth-flo fluid delivery system is a fully programmable dispensing system which is controlled by precision stepper motors. The phase-canceling technology uses three separate valveless pump heads, uniquely timed, to eliminate pulsation.

LISTED UNDER: Dispensers/Fillers | Control

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading