Advertisement

Mix-Dispense Valve

May 2, 2006 8:29 am | Product Releases | Comments

The Model 2200-545-037 two-component miniature mix-dispense valve precisely dispenses miniature beads and very small volumes of low-viscosity pourable materials and abrasive or filled materials.

LISTED UNDER: Dispense | Miniature Valve | Flow

Pressure Control Module

May 2, 2006 8:29 am | Product Releases | Comments

The VSO-EP is a module for precision control of critical system pressures. It is an automated alternative to manual pressure regulators, needle valves, flow controllers, and bleed orifices, providing integral closed-loop proportional control for both dynamic and “set and forget” applications.

LISTED UNDER: Pressure/Vacuum | Proportional | Control

Industrial Air Compressor

May 2, 2006 8:29 am | Product Releases | Comments

A series of air compressors&#151the Sullair 3000, Sullair 3700, and Sullair 4500&#151offer 40, 50, and 60 horsepower and are designed for point-of-use facility installations.

LISTED UNDER: Air Pump | Compressor
Advertisement

Solenoid Valve (3077)

May 2, 2006 8:29 am | Product Releases | Comments

The 3B23 solenoid valve is designed for medical device applications that require media-separation such as dialysis machines, instrument cleaning devices, and dental irrigation equipment.

LISTED UNDER: Solenoid Valve | Flow | Solenoid Valve

Concentrator Valve Assembly

May 2, 2006 8:29 am | Humphrey Products Company | Product Releases | Comments

A manufacturer of O 2 concentrators for in-home oxygen therapy wanted a unit that would simultaneously fill portable bottles while supplying the patient.

LISTED UNDER: Other | Flow | Solenoid Valve

Butterfly Valve (3071)

May 2, 2006 8:29 am | Product Releases | Comments

The Type 57 Butterfly Valve incorporates four major design upgrades in thermoplastic valve technology. New design features include a flange stopper, which prevents the valve liner from over compression. A second feature is a molded body absorption channel.

LISTED UNDER: Other | Flow

Pneumatic Valves

May 2, 2006 8:29 am | Clippard Instrument Laboratory, Inc. | Product Releases | Comments

Maximatic 3-way, 4-way, single and double solenoid, and 3-way and 4-way air piloted valves are available in many sizes and variations for a wide range of applications. Specified, tested, and backed by the company, these quality manufactured imported valves are available in sizes from #10-32 to ½ in.

LISTED UNDER: Solenoid Valve | Flow | Solenoid Valve

ZIF Connectors

May 2, 2006 8:29 am | Product Releases | Comments

The Cannon DLP series of Zero Insertion Force (ZIF) connectors provide greater contact reliability and reduced signal crosstalk. With a minimum rated life of 10,000 mate/unmate cycles and no loss in performance, DLP series connectors can be mated/unmated in less than two seconds.

LISTED UNDER: Connectors
Advertisement

Braid Reinforced Hose

May 2, 2006 8:28 am | Product Releases | Comments

Company recently made improvements in its manufacturing processes and realized increased capacity for its braided hose production lines.

LISTED UNDER: Reinforced

Quick Disconnects

May 2, 2006 8:28 am | Beswick Engineering Co., Inc. | Product Releases | Comments

This ultra-miniature M3 threaded quick disconnect assembly is comprised of a brass internal end and a stainless steel external end. The entire assembly weighs only 3.4 grams. The internal end is designed with an automatic shut-off valve and an M3 internal thread. It is only about 16.

LISTED UNDER: Fittings | Miniature Valve

Silicone Dispensing Tube

May 2, 2006 8:28 am | Watson Marlow Pumps Group | Product Releases | Comments

Pumpsil-D platinum silicone dispensing tube is specially formulated and designed specifically for high accuracy dispensing applications in the biopharmaceutical industry.

LISTED UNDER: Silicone

Signal Tap Box

April 18, 2006 6:57 am | Bioconnect | Product Releases | Comments

This signal tap box, part number 7B5311D0, is designed to tap a signal from a standard 10-lead EEG signal for strip chart recording, saving to an electronic file or “out of the room evaluation” such as a sleep lab. Lead length, wiring configurations, connectors, and labels can be customized.

LISTED UNDER: Connectors

Hypotube

April 6, 2006 7:32 am | Creganna-Tactx Medical | Product Releases | Comments

The PoleVault is an innovative hypotube for catheter manufacturers seeking to improve outcomes for patients undergoing angioplasty. The hypotube is a long metal tube with micro-engineered features along its length.

LISTED UNDER: Metal

Dispensing System (2953)

April 6, 2006 7:32 am | Fluid Metering, Inc. | Product Releases | Comments

The Smooth-flo fluid delivery system is a fully programmable dispensing system which is controlled by precision stepper motors. The phase-canceling technology uses three separate valveless pump heads, uniquely timed, to eliminate pulsation.

LISTED UNDER: Dispensers/Fillers | Control

Miniature Connectors

April 6, 2006 7:25 am | Product Releases | Comments

This line of Mini-HMC heavy-duty connectors provides up to a 65% space savings for applications such as small robots, industrial controls, factory automation, production, and medical equipment.

LISTED UNDER: Connectors

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading