Advertisement

Miniature Power/Signal Connector

February 9, 2006 8:45 am | Positronic | Product Releases | Comments

The Dragonfly series is ideal for use in applications requiring a high reliability miniature connector, which offers signal and/or power contacts. It offers contact current ratings of 20 amperes continuous for size 16 contacts. Size 20 contacts are rated at 12 amperes when used with 18 AWG wire.

LISTED UNDER: Connectors

Dispense Valve (2807)

February 9, 2006 8:45 am | Product Releases | Comments

The model 2200-245-125 Tip-Seal dispense valve is designed for precision dispensing of low- to high-viscosity flowable materials. It is also used in high-speed stitching or repetitive on-off applications where short segments of material are deposited onto a surface.

LISTED UNDER: Dispense | Flow | Silicone

Gas Plasma System

February 8, 2006 5:57 am | Product Releases | Comments

The A400 gas plasma system has a 16 x 16 x 19 in. aluminum chamber, is clean room compatible, and available in both table-top and tall free-standing cabinet versions. Gas introduction via mass flow controllers and magnetic valves ensures precise gas measurement.

LISTED UNDER: Surface Modification | Control | Flow
Advertisement

Emphasis on Motion Control: Turning to Ball Screw Technology

February 7, 2006 5:39 am | Product Releases | Comments

Precise motion control is critical in a number of medical devices. Unfortunately, with the many options available to manufacturers, it is often difficult to know which solution is ideal for a particular application.

LISTED UNDER: Ball and Lead Screws | Heating Elements | Air Pump

Connector System (2705)

February 6, 2006 10:30 am | Product Releases | Comments

RoHS-compatible versions are available of the Conan 1.0 mm pitch, low-profile, board-stacking connector system.

LISTED UNDER: Connectors

Subminiature Connectors

February 6, 2006 10:29 am | Product Releases | Comments

The Grommet D range of D-subminiature connectors are a cost effective and high-density rectangular connector system equipped for the most extreme environmental conditions.

LISTED UNDER: Connectors

Capillary Luer Adapter

February 6, 2006 10:29 am | Product Releases | Comments

This Luer-to-MicroTight adapter introduces no dead volume to the flow path and is ideal for infusing sample into lab-on-a-chip devices. Use it to directly connect a luer-tip syringe or other standard male luer to 360 &#181m O.D. capillary tubing without tubing sleeves.

LISTED UNDER: Luers

Rotary Selector Valves

February 6, 2006 10:29 am | Beswick Engineering Co., Inc. | Product Releases | Comments

The selector valve can be used as a quiet replacement for solenoid valves. In the standard configuration; a single input can be switched between two to six output ports.

LISTED UNDER: Other
Advertisement

Metal Tube Bending

February 6, 2006 10:29 am | Product Releases | Comments

The company bends and forms metal tubing, including stainless steel, MP35N, titanium, and several other alloys in diameters from as small 0.004 in. O.D. to as large as 0.25 in. O.D. It has had tube bending capability in its Boulder, CO headquarters facility for some time.

LISTED UNDER: Metal | Prototyping | Rapid Prototyping

Circular Connector

February 6, 2006 10:29 am | Omnetics Connector Corp. | Product Releases | Comments

Mil Spec quality LCP circular connector with a Santoprene over-mold and embedded electronics is well suited for catheter applications. Focus is on size, ease-of-use, and reliability for medical OEMs.

LISTED UNDER: Connectors | Micro Molding

Inert Diaphragm Valves

February 6, 2006 10:29 am | Product Releases | Comments

The inert diaphragm valve is a solenoid-operated diaphragm isolation valve designed for use with corrosive or high-purity fluids commonly found in the medical equipment industry. The materials of all surfaces in the flow path are inert and impervious to a wide range of aggressive fluids.

LISTED UNDER: Diaphragm Pump | Flow

High Density Polyethylene Tubing

February 6, 2006 10:29 am | Qosina | Product Releases | Comments

High density polyethylene (HDPE) tubing (Part #T1150) is available in coils of 250 feet. The tubing has an ID of 0.1 in. and an OD of 0.15 in. This type of tubing is an option for storing and dispensing guidewires without kinking.

LISTED UNDER: Polyethylene

Nanofiltration Elements

January 11, 2006 10:42 am | Product Releases | Comments

SelRO nanofiltration elements provide excellent chemical and thermal stability. Most nanofiltration membranes previously available were limited to aqueous applications within a pH range of 2 to 11, insufficient for certain pharmaceutical applications with aggressive cleaning requirements.

LISTED UNDER: Membrane

Stainless Steel Screens

January 11, 2006 10:42 am | Product Releases | Comments

Fine MicroEtch stainless steel screens are manufactured using photoetching technology. Photoetching enables designers to specify a straight hole or a tapered hole, which facilitates liquid filtration and back flow cleaning. Hole sizes range from 0.003 in. and up.

LISTED UNDER: Screens | Stamping

Air Filters (2625)

January 11, 2006 10:42 am | Product Releases | Comments

Activator series air filters have multi-stage media construction—layers of multi-denier polyester fibers capture particles throughout the filter's depth. This prevents wasteful "face-loading," increases dust holding capacity, and maximizes the service life of the filter.

LISTED UNDER: Air Pump | Air Filter

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading