EVP Proportional Control Valves

December 8, 2004 10:45 am | Clippard Instrument Laboratory, Inc. | Product Releases | Comments

Clippard Instrument Laboratory, Cincinnati, has a new CD that gives detailed information about its line of EVP proportional control valves, which can control flow ranging from 0 to greater than 20 liters per minute.

LISTED UNDER: Control | Proportional | Control

Solenoid Valves (1635)

December 8, 2004 10:45 am | Product Releases | Comments

Parker Fluid Control Division, New Britain, CT, is offering its new 24/7 Catalog, which features information on Skinner and Gold Ring solenoid valves. The valves, which are suitable for medical instrumentation, are available for shipping within 24 to 48 hours. Information: 440-205-7869.

LISTED UNDER: Solenoid Valve | Control

Bringing Sterilization Inside

December 7, 2004 4:46 am | Steris Corporation | Product Releases | Comments

Smith & Nephew Orthopaedics, a global provider of trauma and joint replacement systems for knees, hips, and shoulders, has begun to sterilize devices in-house.

LISTED UNDER: EtO Equipment | Vacuum | Microbiology/Chemical Testing

Connector (1603)

December 6, 2004 7:30 am | Anderson Materials Evaluation | Product Releases | Comments

The SBS50 connector's two pole housing allows a finger proof design, serving to greatly benefit those using personal mobility devices, including wheelchairs and scooters.

LISTED UNDER: Connectors

Thin Film Coated Fabrics

December 6, 2004 7:30 am | Techni-Met, Llc | Product Releases | Comments

Thin film-coated flexible materials are produced for medical product applications by this company.

LISTED UNDER: Synthetic Fabrics | Metal Filter

Pressure Relief Valves

December 6, 2004 7:30 am | Hydra-Cell Industrial Pumps | Product Releases | Comments

C46 Series valves prevent excess system pressure by bypassing total system fluid flow. They can be serviced in place without removing fittings or plumbing. The valves are available with stainless steel or brass bodies to suit various application needs.

LISTED UNDER: Other | Flow | Fittings

Diaphragm Pump (1583)

December 6, 2004 7:30 am | Product Releases | Comments

Suitable for continuous duty use, the SMF 2 pump provides long life, quiet operation, and low power consumption. EPDM valve and diaphragm materials are standard, with others available to meet special application needs. The pumps are self-priming and may safely be run dry.

LISTED UNDER: Diaphragm Pump | Diaphragm Pump | Flow

Leak Detection (1587)

December 6, 2004 7:30 am | Sensistor Technologies, Inc. | Product Releases | Comments

The H2000 uses a safe, non-hazardous 5% hydrogen in 95% nitrogen mixture to detect leaks. The hydrogen method allows for non destructive testing with short cycle times and reliable results, regardless of the temperature variations or the test objects' shape.

LISTED UNDER: Diaphragm Pump

Adapters

December 6, 2004 7:30 am | Qosina | Product Releases | Comments

Large Bore Touhy Borst Adapters accommodate a wide range of catheter sizes up to 18 French. Both have a crystal clear polycarbonate body that makes it easy to observe flow. Turn the large, easy-to-control cap to adjust the size of the orifice in the silicone gasket.

LISTED UNDER: Connectors

Miniature Clamps (1531)

December 6, 2004 7:30 am | Oetiker, Inc. | Product Releases | Comments

Miniature clamps and rings&#151designed for medical applications&#151have outside diameters as small as 2.5 mm to assure leak-free sealing and fastening solutions. Suitable for hose supply lines with chemicals, inks, liquids, and gases. Clamps are vibration proof.

LISTED UNDER: Clamping Devices

Tubing/Extension Sets

December 6, 2004 7:23 am | Advanced Scientifics Inc. | Product Releases | Comments

Extension set capabilities range from micro bore, small, standard to large bore sizes with co-extruded tubing available. Utilizing cutting edge technology, a broad range of materials and thermoplastic resins are available for device design including non-DEHP, PVC tubing.

LISTED UNDER: PVC Tubing | PVC Tubing

TPR Tubing (1513)

December 6, 2004 7:23 am | Newage Industries, Inc. | Product Releases | Comments

Suprene tubing is produced under Good Manufacturing Practices (GMP) using first-quality polypropylene-based TPR. It offers excellent low-temperature flexibility, is lighter in weight than comparable sizes of rubber tubing, and provides good resistance to tearing and fatigue from repeated flexing.

LISTED UNDER: Rubber | Peristaltic

Silicone Tubing (1523)

December 6, 2004 7:23 am | Watson Marlow Pumps Group | Product Releases | Comments

PumpSil is a platinum-cured silicone tubing with a unique LaserTraceability feature. Designed with an ultra-smooth bore to control protein binding, PumpSil provides optimal pump performance.

LISTED UNDER: Silicone