PTFE Coated Forming Mandrels

September 3, 2004 5:30 am | Applied Plastics Co. Inc. | Product Releases | Comments

Durable, PTFE coated precise forming mandrels are offered for manufacturing small diameter parts including extruded tubing and formed rubber bladders. The PTFE Natural&#153 Fluoropolymer Mandrels feature a uniform, non-flaking PTFE coating on stainless steel or nitinol wire.

LISTED UNDER: Fluoroplastics | Nitinol | Nitinol

Distribution Valves

August 4, 2004 8:16 am | Bio Chem Valve Inc | Product Releases | Comments

Pressure rated up to 500 psi (33 bar), these large manual rotary distribution valves have chemically inert PTFE wetted parts, sturdy PEEK casings, and KEL-F rotors.


Air Filter

August 4, 2004 8:16 am | Camfil Farr | Product Releases | Comments

This updated V-bank Durafil&reg air filter combines energy efficiency and long service life with new plastic construction.

LISTED UNDER: Air Pump | Air Filter

Relief Valves

August 4, 2004 8:16 am | Industrial Specialties Mfg., Inc. | Product Releases | Comments

The relief pressures on a series of relief valves are easily identified by the color of the valve. Offered in 1/8 and 1/4 male NPT and 1/8 female thread, the valve housing is molded of Polyvinylidene Flouride (PVDF), an extremely stable and pure commercial resin.


Servo-Ribbon Applicator

July 8, 2004 11:39 am | Sealant Equipment & Engineering, Inc. | Product Releases | Comments

The Servo-Ribbon Applicator (SRA) is a new concept in dispense-valve applicator tools. It combines an AC Servo-Motor and fluid-dispense valve to robotically position the valve's tip at the correct angle to deliver a precise ribbon-shaped material pattern.

LISTED UNDER: Dispense | Flow

Vacuum Pump

July 8, 2004 11:39 am | Piab Usa, Inc. | Product Releases | Comments

A multi-stage ejector vacuum pump, the P2010, is ideal for applications requiring light and reliable pick-ups, such as medical design component production and pharmaceutical processing. The pump stands at 1.08 inches high and weighs 0.54 ounces.

LISTED UNDER: Vacuum | Vacuum | Air Pump

IV Valve

July 8, 2004 11:39 am | B. Braun Oem Division | Product Releases | Comments

The ULTRASITE&reg valve allows for universal compatibility with both Luer slip and Luer lock connectors. The needle-free valve can simplify the handling and safety of virtually any intravenous procedure.

LISTED UNDER: Injection Sites | Flow

Peristaltic Pumps

July 8, 2004 11:39 am | Product Releases | Comments

Both Model 3100 and 3200 are a complete peristaltic system that includes everything needed to get started: 25 ft. of general PVC tubing to connect the pump to the application, 6 precision silicone tubing cartridge assemblies (2 1.6 mm, 2 3.2 mm, and 2 4.8 mm), pump, and pump head.

LISTED UNDER: Peristaltic | Peristaltic | PVC Tubing


July 8, 2004 11:39 am | Watson Marlow Pumps Group | Product Releases | Comments

The contamination-proof design and customization capabilities make the 313D ideal for medical applications. The pumphead features secure clamps to allow more clearance during loading and prevents tampering.

LISTED UNDER: Peristaltic | Flow

Gas Metering Valve

July 8, 2004 11:39 am | South Bend Controls, Inc. | Product Releases | Comments

The gas metering valve is a direct-acting proportional SERVOID&reg valve driver provides linear proportional control of the metering orifice which yields linear proportional flow. This valve features a suspended-armature design that is inherently reliable and results in very low hysteresis.

LISTED UNDER: Other | Proportional | Control

Optical Fiber Connector

July 8, 2004 11:39 am | Jst Corp. | Product Releases | Comments

The LC type optical fiber connector is about half the size of the SC type optical fiber connector. Borrowing features from the RJ 45 connector, the LC type optical fiber connector uses approximately 50 percent less space than the SC type. The connectors were designed for premise wiring applications.

LISTED UNDER: Connectors


June 8, 2004 9:52 am | Fluid Metering, Inc. | Product Releases | Comments

The V200 Stroke Rate Controller is designed for precision control of all FMI V-Series Variable Speed Metering Pumps. The V200 Controller allows pump speed settings to be adjusted either manually in 0.


TPR Tubing

June 8, 2004 9:52 am | Newage Industries, Inc. | Product Releases | Comments

Suprene&reg TPR tubing is produced under Good Manufacturing Practices using first-quality, polypropylene-based TPR (thermoplastic rubber).

LISTED UNDER: Rubber | Peristaltic

Air Filters (775)

June 8, 2004 9:52 am | Kaeser Compressors | Product Releases | Comments

Contaminated compressed air systems increase operating costs by robbing the air system of useful power. This results in reduced efficiency and higher maintenance and repair costs.


Fluoroplastic Tubing (777)

June 8, 2004 9:52 am | Parker Texmed | Product Releases | Comments

This Precision Fluoroplastic Tubing is chemical-resistant, non-flamable, operates continuously at up to 500&#176F, and offers excellent dielectric properties.

LISTED UNDER: Fluoroplastic


You may login with either your assigned username or your e-mail address.
The password field is case sensitive.