Advertisement

www.clippard.com

December 4, 2003 7:19 am | Clippard Instrument Laboratory, Inc. | Product Releases | Comments

Clippard Pneumatic Control Devices Clippard's complete line of Minimatic&reg Control Devices includes over 5,000 standard products.

LISTED UNDER: Pneumatic Components | Cylinders | Control
Advertisement

www.mrpcorp.com/appeng.htm

December 4, 2003 7:19 am | Mrpc | Product Releases | Comments

Molded Rubber & Plastic Corporation: Vision, Innovation & Technology We are a contract manufacturer of custom molded and finished rubber, plastic, and extruded silicone products.

LISTED UNDER: Elastomers | Prototyping | Laser Machining

www.pall.com/oem

December 4, 2003 7:19 am | Pall Life Sciences | Product Releases | Comments

The Pall Medical OEM site provides a comprehensive resource for OEM Healthcare manufacturers who require gas or fluid filtration to provide patient protection, or enhance or protect the performance of their medical equipment.

LISTED UNDER: Other

www.omnetics.com

December 4, 2003 7:19 am | Omnetics Connector Corp. | Product Releases | Comments

Omnetics Micro and Nano Miniature Connectors Omnetics designs and manufactures Micro and Nano miniature connectors. Full product line on centerlines from .025" to .050" include COTS, Standards and custom, single and two-row connectors, along with circular and test configurations.

LISTED UNDER: Connectors | Prototyping

Solenoid Valve

December 4, 2003 7:07 am | South Bend Controls, Inc. | Product Releases | Comments

The proportional solenoid valve is a single-stage direct-acting proportional solenoid valve. The valve provides a flow rate which is linearly proportional to the input current. The maximum air flow capacity is 120 SLPM with an inlet pressure of 25 psig and approximately 5 watts power requirement.

LISTED UNDER: Solenoid Valve | Proportional | Flow

Laboratory Pump

December 4, 2003 7:07 am | Product Releases | Comments

The 401U/D1 pump, which provides single or multiple channels for precision metering between 0.01 ml to 120 ml per minute, is ideal for perfusion applications.

LISTED UNDER: Metering

Coating System

December 4, 2003 7:07 am | Efd Inc. | Product Releases | Comments

Low volume low pressure coating system applies drug solutions and other coatings to stents and catheters in precise amounts, without waste, mist, or overspray. Consistent coating placement and thickness increases yields, reduces production costs, and improves process control.

LISTED UNDER: Device Coating | Control | Device Coating

Silicone Tubing

December 4, 2003 7:07 am | Newage Industries, Inc. | Product Releases | Comments

AdvantaPure, the sanitary products division of NewAge Industries, Inc., recently expanded its manufacturing facilities with an additional production line for silicone tubing and hose.

LISTED UNDER: Silicone

Metering/Dispense Valve

December 3, 2003 10:54 am | Graco Ohio Inc | Product Releases | Comments

The PosiDot&reg valve is able to meter, mix, and dispense small shots from 0.005 cc to 5.0 cc while maintaining precise ratio and shot size repeatability.

LISTED UNDER: Dispense

Check Valves

November 5, 2003 6:10 am | B. Braun Oem Division | Product Releases | Comments

This full line of check valves includes needle-free, in-line, normally closed, low pressure one-way, TRAC&#153, aspiration, and dual check valves. Available in a variety of flow rates, materials, sizes, and custom designs, the valves are designed to meet the toughest application challenges.

LISTED UNDER: Check | Flow

DC Solenoids

November 5, 2003 6:10 am | Product Releases | Comments

A 1.5 in. diameter model has been added to the Decco&reg Industrial Solenoids line of 5/8 in., 7/8 in., and 1-1/8 in. Tubular DC Solenoids, extending the line to 21 models with an overall force range of 1.0 oz. To 10.4 lbs.

LISTED UNDER: Solenoid Valve

Silicone Manufacturing

October 20, 2003 6:08 am | Product Releases | Comments

With services including silicone extrusion and molding of liquid silicone rubber, Smiths offers 30 years of experience in silicone device, catheter and balloon manufacturing, and "state-of-the-art technology" application.

LISTED UNDER: Silicone | Silicon Molding | Silicon Molding

Automated Hole-Making Systems

October 7, 2003 11:00 am | Technical Innovations, Inc. | Product Releases | Comments

Non-contact lumen locating technology from TI automates the process of isolating a desired lumen for hole drilling, punching, or skiving in a multi-lumen catheter. The technology is available with TI's Smart Driller&#153 CL and Smart Puncher&#153 CL automated hole-making systems.

LISTED UNDER: Tubing-Processing Equipment | Multilumen Tubing

Isolation Valve

September 22, 2003 6:33 am | ASCO | Product Releases | Comments

Mini-Manifold Isolation Valve simplifies fluid control for manufacturers of clinical diagnostic instruments and analytical equipment. The Series 385 is a 16mm wide, manifold mount, miniature isolation valve designed to control the flow of aggressive chemicals or high purity fluids.

LISTED UNDER: Check Valves | Miniature Valve | Control

Heat Shrinkable Tubing

July 31, 2003 11:33 am | Parker Texmed | Product Releases | Comments

TexMed&#153 Fluoroplastic Medical Grade Heat Shrinkable Tubing includes PTFE, PFA, FEP, ETFE, PEEK, and PEI formulations that are Class VI approved and offered with shrink ratios of 1.3:1 up to 4:1, depending on the material. Featuring a variety of standard and custom sizes from 0.001 in. I.D.

LISTED UNDER: Heat-Shrink

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading