Advertisement

Check Valves

November 5, 2003 6:10 am | B. Braun Oem Division | Product Releases | Comments

This full line of check valves includes needle-free, in-line, normally closed, low pressure one-way, TRAC&#153, aspiration, and dual check valves. Available in a variety of flow rates, materials, sizes, and custom designs, the valves are designed to meet the toughest application challenges.

LISTED UNDER: Check | Flow
Advertisement

Silicone Manufacturing

October 20, 2003 6:08 am | Product Releases | Comments

With services including silicone extrusion and molding of liquid silicone rubber, Smiths offers 30 years of experience in silicone device, catheter and balloon manufacturing, and "state-of-the-art technology" application.

LISTED UNDER: Silicone | Silicon Molding | Silicon Molding

Automated Hole-Making Systems

October 7, 2003 11:00 am | Technical Innovations, Inc. | Product Releases | Comments

Non-contact lumen locating technology from TI automates the process of isolating a desired lumen for hole drilling, punching, or skiving in a multi-lumen catheter. The technology is available with TI's Smart Driller&#153 CL and Smart Puncher&#153 CL automated hole-making systems.

LISTED UNDER: Tubing-Processing Equipment | Multilumen Tubing

Isolation Valve

September 22, 2003 6:33 am | ASCO | Product Releases | Comments

Mini-Manifold Isolation Valve simplifies fluid control for manufacturers of clinical diagnostic instruments and analytical equipment. The Series 385 is a 16mm wide, manifold mount, miniature isolation valve designed to control the flow of aggressive chemicals or high purity fluids.

LISTED UNDER: Check Valves | Miniature Valve | Control

Heat Shrinkable Tubing

July 31, 2003 11:33 am | Parker Texmed | Product Releases | Comments

TexMed&#153 Fluoroplastic Medical Grade Heat Shrinkable Tubing includes PTFE, PFA, FEP, ETFE, PEEK, and PEI formulations that are Class VI approved and offered with shrink ratios of 1.3:1 up to 4:1, depending on the material. Featuring a variety of standard and custom sizes from 0.001 in. I.D.

LISTED UNDER: Heat-Shrink

3-Way Valves

July 31, 2003 11:33 am | Air Logic | Product Releases | Comments

Company manufactures pressure piloted or vacuum piloted 3-way valves with adjustable pilot set points. Normally open or normally closed valves are available. Four mounting styles are available: flush mount, manifold mount, pipe thread, and panel mount. Pilot adjustment ranges from 0.

LISTED UNDER: Pressure/Vacuum

Contrast Injection Line Tubing

June 2, 2003 1:23 pm | Product Releases | Comments

DuoPEX&#153 combines two layers of material&#151polyurethane and nylon&#151for flexibility and strength at a mid-level cost. It is a good alternative to the more rigid PVC lines that can be difficult to handle during actual contrast injection procedures.

LISTED UNDER: Polyurethane

IV Catheter

June 2, 2003 1:23 pm | B. Braun Oem Division | Product Releases | Comments

The Introcan&reg Safety IV Catheter incorporates a passive design to minimize needlestick injuries without requiring user activation. The safety clip is pre-assembled in the catheter hub, and is automatically engaged when the needle bevel exits the catheter hub.

LISTED UNDER: Injection Sites

Capless Valve

April 10, 2003 11:34 am | B. Braun Oem Division | Product Releases | Comments

The ULTRASITE positive displacement IV system features a needle-free design ideal for the intermittent injection, aspiration, or infusion of fluids. The ULTRASITE valve is a normally closed valve with female and male Luer lock connections.

LISTED UNDER: Check Valves | Flow

Dispense Valve

April 10, 2003 11:34 am | Graco Ohio Inc | Product Releases | Comments

The Dispensit&reg Model 1052 rod positive displacement valve series is designed for accurate, repeatable dispensing of shots ranging from 0.002 cc to 1.8 cc. The Model 1052 can dispense virtually any single component material needed medical application.

LISTED UNDER: Dispense

Solenoid Pumps/Valves

April 10, 2003 11:34 am | Bio Chem Valve Inc | Product Releases | Comments

This line of manifold inert solenoid pumps and valves has a footprint as small as 0.5 in. for space-saving mounting. A highly efficient threaded collar design is employed to secure the valve or pump to the manifold.

LISTED UNDER: Solenoid Valve | Gas Valve

Reusable Luer Locks

April 10, 2003 11:34 am | S4J Manufacturing Services, Inc. | Product Releases | Comments

The reusable Luer Lock components covered in this catalog are available for a wide range of medical applications. The catalog represents the company's expanded line of standard, stocked configurations, as well as a section devoted to blood pressure monitoring connectors.

LISTED UNDER: Luers

Syringe Pumps

April 10, 2003 11:34 am | Product Releases | Comments

A line of standard and custom syringe pumps are available for precision filling and dispensing applications. The VersaPump series offers syringe volumes ranging from 10 uL to 50 ML, with 3-way to 8-way valve capability. Pumps can be daisey-chained for continuous flow applications.

LISTED UNDER: Syringe | Flow

Pumps

March 17, 2003 6:52 am | Product Releases | Comments

The VersaPump series offers syringe volumes ranging from 10uL to 50ML, with 3-way to 8-way valve capability. Pumps can be daisey-chained for continuous flow applications. These pumps offer chemically inert fluid paths of Teflon, Kel-F and borosilicate glass.

LISTED UNDER: Other | Control | Flow

Transfer/Filter Devices

February 6, 2003 11:58 am | B. Braun Oem Division | Product Releases | Comments

The Burron OEM Division of B.Braun Medical Inc., an FDA-registered, ISO 9001 manufacturer of disposable medical devices, offers a complete line of transfer and filter devices for a variety of fluid transfer applications.

LISTED UNDER: Transfer Devices

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading