Advertisement

Silicone Tubing

December 4, 2003 7:07 am | Newage Industries, Inc. | Product Releases | Comments

AdvantaPure, the sanitary products division of NewAge Industries, Inc., recently expanded its manufacturing facilities with an additional production line for silicone tubing and hose.

LISTED UNDER: Silicone

Metering/Dispense Valve

December 3, 2003 10:54 am | Graco Ohio Inc | Product Releases | Comments

The PosiDot&reg valve is able to meter, mix, and dispense small shots from 0.005 cc to 5.0 cc while maintaining precise ratio and shot size repeatability.

LISTED UNDER: Dispense

Check Valves

November 5, 2003 6:10 am | B. Braun Oem Division | Product Releases | Comments

This full line of check valves includes needle-free, in-line, normally closed, low pressure one-way, TRAC&#153, aspiration, and dual check valves. Available in a variety of flow rates, materials, sizes, and custom designs, the valves are designed to meet the toughest application challenges.

LISTED UNDER: Check | Flow
Advertisement

DC Solenoids

November 5, 2003 6:10 am | Product Releases | Comments

A 1.5 in. diameter model has been added to the Decco&reg Industrial Solenoids line of 5/8 in., 7/8 in., and 1-1/8 in. Tubular DC Solenoids, extending the line to 21 models with an overall force range of 1.0 oz. To 10.4 lbs.

LISTED UNDER: Solenoid Valve

Silicone Manufacturing

October 20, 2003 6:08 am | Product Releases | Comments

With services including silicone extrusion and molding of liquid silicone rubber, Smiths offers 30 years of experience in silicone device, catheter and balloon manufacturing, and "state-of-the-art technology" application.

LISTED UNDER: Silicone | Silicon Molding | Silicon Molding

Automated Hole-Making Systems

October 7, 2003 11:00 am | Technical Innovations, Inc. | Product Releases | Comments

Non-contact lumen locating technology from TI automates the process of isolating a desired lumen for hole drilling, punching, or skiving in a multi-lumen catheter. The technology is available with TI's Smart Driller&#153 CL and Smart Puncher&#153 CL automated hole-making systems.

LISTED UNDER: Tubing-Processing Equipment | Multilumen Tubing

Isolation Valve

September 22, 2003 6:33 am | ASCO | Product Releases | Comments

Mini-Manifold Isolation Valve simplifies fluid control for manufacturers of clinical diagnostic instruments and analytical equipment. The Series 385 is a 16mm wide, manifold mount, miniature isolation valve designed to control the flow of aggressive chemicals or high purity fluids.

LISTED UNDER: Check Valves | Miniature Valve | Control

Heat Shrinkable Tubing

July 31, 2003 11:33 am | Parker Texmed | Product Releases | Comments

TexMed&#153 Fluoroplastic Medical Grade Heat Shrinkable Tubing includes PTFE, PFA, FEP, ETFE, PEEK, and PEI formulations that are Class VI approved and offered with shrink ratios of 1.3:1 up to 4:1, depending on the material. Featuring a variety of standard and custom sizes from 0.001 in. I.D.

LISTED UNDER: Heat-Shrink
Advertisement

3-Way Valves

July 31, 2003 11:33 am | Air Logic | Product Releases | Comments

Company manufactures pressure piloted or vacuum piloted 3-way valves with adjustable pilot set points. Normally open or normally closed valves are available. Four mounting styles are available: flush mount, manifold mount, pipe thread, and panel mount. Pilot adjustment ranges from 0.

LISTED UNDER: Pressure/Vacuum

IV Catheter

June 2, 2003 1:23 pm | B. Braun Oem Division | Product Releases | Comments

The Introcan&reg Safety IV Catheter incorporates a passive design to minimize needlestick injuries without requiring user activation. The safety clip is pre-assembled in the catheter hub, and is automatically engaged when the needle bevel exits the catheter hub.

LISTED UNDER: Injection Sites

Contrast Injection Line Tubing

June 2, 2003 1:23 pm | Product Releases | Comments

DuoPEX&#153 combines two layers of material&#151polyurethane and nylon&#151for flexibility and strength at a mid-level cost. It is a good alternative to the more rigid PVC lines that can be difficult to handle during actual contrast injection procedures.

LISTED UNDER: Polyurethane

Capless Valve

April 10, 2003 11:34 am | B. Braun Oem Division | Product Releases | Comments

The ULTRASITE positive displacement IV system features a needle-free design ideal for the intermittent injection, aspiration, or infusion of fluids. The ULTRASITE valve is a normally closed valve with female and male Luer lock connections.

LISTED UNDER: Check Valves | Flow

Syringe Pumps

April 10, 2003 11:34 am | Product Releases | Comments

A line of standard and custom syringe pumps are available for precision filling and dispensing applications. The VersaPump series offers syringe volumes ranging from 10 uL to 50 ML, with 3-way to 8-way valve capability. Pumps can be daisey-chained for continuous flow applications.

LISTED UNDER: Syringe | Flow

Solenoid Pumps/Valves

April 10, 2003 11:34 am | Bio Chem Valve Inc | Product Releases | Comments

This line of manifold inert solenoid pumps and valves has a footprint as small as 0.5 in. for space-saving mounting. A highly efficient threaded collar design is employed to secure the valve or pump to the manifold.

LISTED UNDER: Solenoid Valve | Gas Valve

Reusable Luer Locks

April 10, 2003 11:34 am | S4J Manufacturing Services, Inc. | Product Releases | Comments

The reusable Luer Lock components covered in this catalog are available for a wide range of medical applications. The catalog represents the company's expanded line of standard, stocked configurations, as well as a section devoted to blood pressure monitoring connectors.

LISTED UNDER: Luers

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading