Airless Flat-Spray Valve

February 6, 2004 8:46 am | Product Releases | Comments

This Airless Flat-Spray Valve is designed to eliminate spray-nozzle orientation problems. Model 2200-245-130 Kiss&#153 No-Drip&reg valve delivers precise, repeatable patterns of sprayable sealants, adhesives, and lubricants.



February 6, 2004 8:46 am | Product Releases | Comments

Gold STAX&#153 connectors provide designers of portable and handheld devices with superior performance and more flexibility over traditional mechanical stacking connectors in board-to-board interconnections, without the cost and worries of modification.

LISTED UNDER: Connectors

Condensate Filter

February 6, 2004 8:46 am | Product Releases | Comments

Disposing of compressed air condensate is a major environmental concern. This oil/water mixture is classified as hazardous waste and cannot be discharged into municipal wastewater systems unless the oil and contaminants are removed.


Scroll Air Compressor/Pump

February 6, 2004 8:46 am | Product Releases | Comments

Measuring just 1.4 in.-square x 3 in.-long, the tiny P5H7 scroll pump delivers up to 10 psi and has a no load flow of 0.14 CFM.

LISTED UNDER: Air Pump | Vacuum | Air Pump


January 8, 2004 12:23 pm | Product Releases | Comments

The Max Flow Connector offers a unique design to increase the operational flow rates of your equipment for both air and gas applications. A 10 - 220% improvement in flow was observed during testing competitive testing.

LISTED UNDER: Connectors

December 4, 2003 7:19 am | Product Releases | Comments

Visit for a comprehensive listing of information on diagnostic assay materials, medical membranes, filter devices, and kit packs.


December 4, 2003 7:19 am | Product Releases | Comments

The Pall Medical OEM site provides a comprehensive resource for OEM Healthcare manufacturers who require gas or fluid filtration to provide patient protection, or enhance or protect the performance of their medical equipment.


December 4, 2003 7:19 am | MRPC | Product Releases | Comments

Molded Rubber & Plastic Corporation: Vision, Innovation & Technology We are a contract manufacturer of custom molded and finished rubber, plastic, and extruded silicone products.

LISTED UNDER: Elastomers | Prototyping | Laser Machining

December 4, 2003 7:19 am | Sunlite Plastics | Product Releases | Comments

Sunlite Plastics, Inc. has been manufacturing high quality extrusions since 1996. Today, the company is a major supplier of tubing related extrusion to medical device manufacturers worldwide. Sunlite owns and operates two state-of-the-art extrusion facilities.

LISTED UNDER: Extrusion | Multilumen Tubing | Coextrusions/Paratubing

December 4, 2003 7:19 am | Clippard Instrument Laboratory, Inc. | Product Releases | Comments

Clippard Pneumatic Control Devices Clippard's complete line of Minimatic&reg Control Devices includes over 5,000 standard products.

LISTED UNDER: Pneumatic Components | Cylinders | Control

December 4, 2003 7:19 am | Omnetics Connector Corp. | Product Releases | Comments

Omnetics Micro and Nano Miniature Connectors Omnetics designs and manufactures Micro and Nano miniature connectors. Full product line on centerlines from .025" to .050" include COTS, Standards and custom, single and two-row connectors, along with circular and test configurations.

LISTED UNDER: Connectors | Prototyping

Solenoid Valve

December 4, 2003 7:07 am | Product Releases | Comments

The proportional solenoid valve is a single-stage direct-acting proportional solenoid valve. The valve provides a flow rate which is linearly proportional to the input current. The maximum air flow capacity is 120 SLPM with an inlet pressure of 25 psig and approximately 5 watts power requirement.

LISTED UNDER: Solenoid Valve | Proportional | Flow

Laboratory Pump

December 4, 2003 7:07 am | Product Releases | Comments

The 401U/D1 pump, which provides single or multiple channels for precision metering between 0.01 ml to 120 ml per minute, is ideal for perfusion applications.


Coating System

December 4, 2003 7:07 am | Product Releases | Comments

Low volume low pressure coating system applies drug solutions and other coatings to stents and catheters in precise amounts, without waste, mist, or overspray. Consistent coating placement and thickness increases yields, reduces production costs, and improves process control.

LISTED UNDER: Device Coating | Control | Device Coating

Silicone Tubing

December 4, 2003 7:07 am | Product Releases | Comments

AdvantaPure, the sanitary products division of NewAge Industries, Inc., recently expanded its manufacturing facilities with an additional production line for silicone tubing and hose.



You may login with either your assigned username or your e-mail address.
The password field is case sensitive.