Advertisement

Dosing Pump

July 25, 2013 3:52 pm | GRI Pumps | Products

GRI’s new Dosing Pumps are ideal for low flow, low pressure metering applications where a fixed flow rate is required. The Dosing Pumps are constructed entirely of plastic and use GRI’s time-proven bellows technology to provide a durable and accurate chemically resistant metering pump. When pumping water in laboratory test conditions, pumps rate at +/- 1%, stroke to stroke. As with all of GRI pumps, the Dosing Pumps are highly OEM customizable. A variety of configurations are available to meet many different system requirements. Typical applications include: Soap Dispensing, Chemical Dispensing, Appliance Market, Warewashing, Water Purification Market, Laboratory Market, HVAC Market, and OEM Markets requiring metering pumps

LISTED UNDER: Bellows | Chemically Inert | Metering

Gear Pumps

July 25, 2013 3:51 pm | GRI Pumps | Products

Gear pumps are designed primarily for metering and transfer applications. Their modular design allows a wide variation of flow ranges with a standard parts set. Gear pumps are self-priming and are “constant flow” pumps when RPM and differential pressure are constant. The materials of construction for bodies, gears and seals, provide a wide range of fluid compatibility.

LISTED UNDER: Chemically Inert | Metering

Oscillating Pumps

July 25, 2013 3:02 pm | GRI Pumps | Products

Oscillating pumps are self-priming, corrosion resistant, have no dynamic seals and are constructed from FDA accepted materials. Typical applications include film and microfilm processors; litho and graphic arts plate processors; detergent dispensing, chemical mixing, medical, scientific and laboratory equipment. These pumps are intended for replenishing, transfer and circulating installations.

LISTED UNDER: Chemically Inert | Positive-Displacement
Advertisement

Piston Diaphragm Pump

July 25, 2013 2:15 pm | GRI Pumps | Products

Piston diaphragm pumps are positive displacement pumps designed to economically transfer small volumes of fluid at low discharge pressures. The lightweight, compact pumps are self-priming, corrosion resistant and can handle viscous fluids. These features make the pumps ideal for high volume copy machines, scientific and laboratory instruments and other chemical dispensing applications.

LISTED UNDER: Diaphragm Pump | Positive-Displacement

Hydrophobic & Hydrophilic Filters

July 25, 2013 9:12 am | Qosina | Products

Qosina is pleased to announce the addition of two new Hydrophobic Filters (#28246 & #28247) and one Hydrophilic Filter (#28245). Equipped with a polypropylene housing, all three filters have a female luer lock inlet, a male luer slip outlet, and a 0.2 micron pore size. The Hydrophobic Filters are offered with a PTFE membrane and are available in 25 mm and 15 mm diameters and the Hydrophilic filter is available with a PES membrane and in a 25 mm diameter.

LISTED UNDER: Hydrophilic | Hydrophobic

HV-HTV Toggle & Stem Valve Series

July 18, 2013 11:37 am | by MDT Staff | Clippard Instrument Laboratory, Inc. | Product Releases | Comments

Available in 3-way and 4-way configurations, Clippard’s new HV-HTV valves feature the same benefits available with other Minimatic brass valves: proven reliability, compact size, economical pricing, precision machining, and more.

LISTED UNDER: Other | Pressure/Vacuum

Miniature OEM Pumps for Medical Diagnostic Instrumentation

July 12, 2013 5:23 pm | by MDT Staff | Product Releases | Comments

Miniature, Stepper driven Valveless OEM Pumps from Fluid Metering, Inc. (FMI) are ideal for low and micro-volume fluid control in Medical Diagnostic and Clinical Chemistry Instrumentation. FMI OEM pumps integrate FMI's unique patented CeramPump valveless pumping principle with precision stepper control.

LISTED UNDER: Other

Pumps Bring Reliability to Gas and Leak Detection Warning Devices

July 8, 2013 5:44 pm | by MDT Staff | Product Releases | Comments

Designed for handheld gas and leak detection warning devices, the new 1010 Series diaphragm compressors and pumps from Thomas have been tested for 4,000 hours of nonstop operation providing the utmost in reliability and safety.

LISTED UNDER: Compressor | Diaphragm Pump
Advertisement

Medical Grade Barbed Check Valve Line to Ease Assembly and Avoid Risks

July 1, 2013 12:58 pm | by MDT Staff | Value Plastics, A Nordson Company | Product Releases | Comments

Value Plastics, a Nordson Company, has introduced a new line of barbed check valves as an extension to their SCV Series of check valves. Most medical grade check valves incorporate solvent bonded end fitments that require costly material handling and increase the risk of contamination and cracking due to chemical incompatibility introduced through solvents.

LISTED UNDER: Check

One Way Respiratory Valves

June 11, 2013 4:16 pm | Qosina | Products

Qosina is pleased to announce the addition of two One Way Respiratory Valves (#97351, #97352) to their line of respiratory kit components and circuit connectors. Made of polypropylene and medical grade silicone, the valves feature molded arrows to indicate the direction of flow. Designed to allow the flow of gases in only one direction, One Way Respiratory Valve #97351 offers flow from 22 mm ID Inlet to 22 mm OD Outlet (female to male), while #97352 provides flow from 22 mm OD Inlet to 22 mm ID Outlet (male to female). Both components are in stock and available for immediate delivery, with a low order minimum and short lead time.

LISTED UNDER: Other

Pre-Assembled Hemostasis Valve with Sideport Tubing & 3-Way Stopcock

June 11, 2013 4:07 pm | Qosina | Products

Qosina is pleased to introduce the addition of three new Hemostasis Valves with sideport tubing connection to a 3-way stopcock (Part #80451 (orange), #80452 (green) and #80453 (gray)). The Hemostasis valve features an automatic pre-slit seal, which eliminates the need for manual rotation, for items sized 0 FR - 8 FR (0 inch - 0.105 inch) (0 mm - 2.7 mm) in diameter. The valve also offers a rotating male luer lock with a vented female luer lock cap. The stopcock features 2 female luers, a tube connection and a male luer lock cap. Tubing 7.5 inches in length connects the valve and stopcock of these pre-assembled, non-sterile components.

LISTED UNDER: Stopcocks | Connectors

New Cross Connectors

June 11, 2013 3:58 pm | Qosina | Products

Qosina now offers Cross Connectors (#97353 - #97358) in stock and ready for immediate delivery. They feature four barbed tubing ports and are made of radiation stable polypropylene formulated for biomedical and bioprocess applications. Barbed cross connectors come in sizes available to fit 1/16 inch (0.062 inch, 1.59 mm), 3/32 inch (0.093 inch, 2.38 mm), 1/8 inch (0.125 inch, 3.2 mm), 5/32 inch (0.156 inch, 3.97 mm), 3/16 inch (0.187 inch, 4.76 mm) or 1/4 inch (0.250 inch, 6.35 mm) ID tubing. Qosina carries a wide range of connectors including Y, T, straight, multi-port, funnel and elbow, along with a variety of tubing options to complete your project.

LISTED UNDER: Connectors

PVDF Connectors Deliver High Purity, Compatibility

June 10, 2013 5:28 pm | by MDT Staff | Colder Products Company | Product Releases | Comments

Colder Products Company has announced the addition of PVDF to the available material options throughout its FitQuik Connectors product line. This material addition creates more than 100 new FitQuik Connectors alongside the existing nylon, polypropylene and polycarbonate materials and configurations available.

LISTED UNDER: Connectors | Polycarbonates

Sterilizing Grade Filter Membrane

June 7, 2013 8:00 am | Mott Corporation | Products

Mott's sterilizing grade filter membrane is intended for circumstances requiring ultra-fine, sub-micron filtration. It is made of stainless steel or titanium and is capable of achieving extremely efficient levels of filtration and separation (> 7LRV @ 0.2 micron). Mott's sterilizing grade filters offer a unique solution for industry devices that require a stronger, more durable and longer lasting product. It is biocompatible, impervious to solvents, and compatible with most organic compounds and complex drug chemistries.

LISTED UNDER: Air Filter | Depth | Membrane

Rocking Piston Pump or Compressor

June 6, 2013 9:53 am | All-Star Products | Products

The rocking piston pump is an oil-free compressor or vacuum pump that is a compact and reliable source of high pressure (to 115 psig) or vacuum (to 29.1 "Hg) at moderate flows of 0.035 to 6.3 CFM. They are available for use on AC or brushless DC power, and as standard or special designs. These pumps are very efficient compared to other types of pumps, such as a diaphragm pump. They are frequently used in medical and dental applications such as autoclaves, sterilizers, dental vacuums, oxygen concentrators, blood analysers, gas analyzers, dryers, water aspirators, electron microscopes, spectrometers, pneumatic beds,nebulizers and blood pressure instrumentation.

LISTED UNDER: Air Pump | Compressor | Piston

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading