Advertisement
Filters

High Performance EMI Filter in 24 Pin DIP Package

June 11, 2014 8:03 am | by MDT Staff | Product Releases | Comments

BetaDyne announced the PFL100 high performance EMI filter. The PFL100 is designed to cost-effectively reduce conducted emissions from DC/DC, amplifiers, and control circuits. The PFL100 is designed to meet CS01, CE03 per Mil Std-461-E...

LISTED UNDER: Other

Porous Metal Products

March 27, 2014 8:25 am | by MDT Staff | Mott Corporation | Product Releases | Comments

Mott porous metal products play a variety of roles in medical device designs and applications. This year Mott will exhibit these products at the BIOMEDevice Show at the Boston Convention Center on March 26-27 at Booth #437.

LISTED UNDER: Metal Filter

Portable Electronic Vent: Highest Airflow, Waterproof Protection

February 26, 2014 10:05 am | by MDT Staff | W.L. Gore & Associates | Product Releases | Comments

In response to the growing demand for waterproof smart phones and portable electronic devices, W. L. Gore & Associates has expanded the waterproofing solutions in its line of GORE Portable Electronic Vents. The new PE3 Series delivers the highest airflow of black venting solutions for OEMs in this rapidly changing market...

LISTED UNDER: Air Filter | Hydrophobic | Microporous
Advertisement

Sintered Porous Materials for Medical Applications

January 6, 2014 1:18 pm | by MDT Staff | Product Releases | Comments

Porvair Filtration Group offers the regulatory approved BioVyon sintered porous plastic materials and its flagship product, Chromatrap, based upon proprietary BioVyon technology and used by researchers to identify cancer biomarkers.

LISTED UNDER: Microporous | Other | Plastic

Membrane Chip Interface Advances Microfluidic Applications

November 21, 2013 5:07 pm | by MDT Staff | The Dolomite Centre Ltd | Product Releases | Comments

Microfluidics specialist Dolomite announced the launch of its Membrane Chip Interface, a novel device designed specifically for in-line liquid-liquid separation, liquid-liquid contacting, dead-end and cross-flow filtration, and electrochemistry applications.

LISTED UNDER: Other

New Spray Cabin Filters Out 99% of Machined Parts Contaminants

November 11, 2013 12:41 pm | by MDT Staff | Product Releases | Comments

When compressed air is used to blow off oil, dust and other debris from machined parts on the factory floor, these contaminants become airborne and can affect the health and safety of machine operators.

LISTED UNDER: Other

Wide Range of Fluid Filtration Products

October 21, 2013 2:39 pm | by MDT Staff | Product Releases | Comments

Eriez offers a wide range of industrial filtration and fluid recycling systems that maximize coolant effectiveness, improve machine tool productivity and reduce disposal costs. From media free vacuum filters to fluid transfer systems, Eriez HydroFlow Filters deliver filtered coolants at high speeds and fast feed rates.

LISTED UNDER: Other

Hydrophobic & Hydrophilic Filters

July 25, 2013 9:12 am | Qosina | Products

Qosina is pleased to announce the addition of two new Hydrophobic Filters (#28246 & #28247) and one Hydrophilic Filter (#28245). Equipped with a polypropylene housing, all three filters have a female luer lock inlet, a male luer slip outlet, and a 0.2 micron pore size. The Hydrophobic Filters are offered with a PTFE membrane and are available in 25 mm and 15 mm diameters and the Hydrophilic filter is available with a PES membrane and in a 25 mm diameter.

LISTED UNDER: Hydrophilic | Hydrophobic
Advertisement

Sterilizing Grade Filter Membrane

June 7, 2013 8:00 am | Mott Corporation | Products

Mott's sterilizing grade filter membrane is intended for circumstances requiring ultra-fine, sub-micron filtration. It is made of stainless steel or titanium and is capable of achieving extremely efficient levels of filtration and separation (> 7LRV @ 0.2 micron). Mott's sterilizing grade filters offer a unique solution for industry devices that require a stronger, more durable and longer lasting product. It is biocompatible, impervious to solvents, and compatible with most organic compounds and complex drug chemistries.

LISTED UNDER: Air Filter | Depth | Membrane

Rush Grinding Fluid Filtration Systems

June 5, 2013 10:05 am | Rush Machinery | Products

The Rush Grinding Fluid Filtration Systems filter either grinding oils to one micron particle size or water-based fluids to five micron nominal particle size, using edge filtration technology. Designed to integrate with most grinding, lapping and honing machines in use today, the Rush systems provide continuous filtration, automatic back flush, and clean oil on demand to your machines. Contact Rush Machinery for more information.

LISTED UNDER: Other

Sterilizing Grade All-Metal Filtration Membrane

May 9, 2013 3:36 pm | by MDT Staff | Mott Corporation | Product Releases | Comments

Mott has announced the development of their ground breaking, all-metal sterilizing grade membrane for medical filtration applications. The membrane is produced using nano-materials and a proprietary manufacturing process developed by Mott engineers.

LISTED UNDER: Membrane

Check VaLVES AND FILTERS

May 9, 2013 10:15 am | Pneuline Supply | Products

Miniature plastic check valves and filters for tubing sizes 1/8 to 3/8. These check valves are made from polycarbonate material with USP class VI silicone disk. Filters of polycarbonate with 10 to 200 micron screens.

LISTED UNDER: Air Filter | Screens | Check

Porous Metal Products Used In Medical Device Designs

March 15, 2013 11:18 am | by MDT Staff | Mott Corporation | Product Releases | Comments

Porous metal has been widely used in advanced technology applications and has found a number of uses in the design and manufacture of medical devices.

LISTED UNDER: Membrane | Precious Metals | Metal Filter

Porous Microbial Barrier with High Airflow for Medical Device Packaging

February 22, 2013 10:12 am | by MDT Staff | Product Releases | Comments

Porex offers P3 Technology, a new venting capability for ethylene oxide (EtO) sterilization in medical device packaging applications. The initial offering will be specialty porous PTFE films that are outstanding sterile barriers with high airflow.

LISTED UNDER: Microporous | Clamshells/Blisters | Lidding

Nanotechnology Sub-Micron Filtration Membrane

January 28, 2013 11:47 am | Mott Corporation | Product Releases | Comments

Mott Corporation introduces a revolutionary nanotechnology porous metal membrane. This technology represents a breakthrough in porous metal manufacturing and for those applications requiring ultra-fine, sub-micron filtration.

LISTED UNDER: Membrane | Microporous | Metal Filter

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading