Advertisement

Zip Line Power Module Provides Highest Density and Superior Flexibility

June 25, 2008 4:41 am | Product Releases | Comments

Designed for both backplane and orthogonal applications, the power IMLA has a current carrying capacity of 7 A per position, or 42 A per column, as tested for 30&#176C temperature rise in still air when a single 6-contact power IMLA is integrated within a signal module.

LISTED UNDER: Connectors

Product Selector Simplifies Selection in Connector Portfolio

June 20, 2008 5:28 am | Product Releases | Comments

This product portfolio helps designers of printed circuit board assemblies complete mezzanine designs faster, easier, and with less risk.

LISTED UNDER: Connectors

IP67 Rated Circular Connectors Lock in Place

June 10, 2008 1:03 pm | Omron Electronic Components, LLC | Product Releases | Comments

The Smartclick connector line has expanded, as the XS5M panel-mount plug and XS5P panel-mount socket have been made available. These IP67 rated circular connectors are compatible with screw-on M12 connectors and XS5 Connectors and strengthen circuit connection by locking into place.

LISTED UNDER: Connectors
Advertisement

Shielded Hood Connector Offers EMI/RFI Screening

May 8, 2008 8:43 am | Product Releases | Comments

This D-Sub shielded hood is designed with an optimum number of pieces: two half-metal covers in zamack (zinc alloy), two jack screws, and a steel fiber-reinforced plastic strain relief for EMI/RFI screening and mechanical cable reten tion. The strain relief works with cable diameters from 4.

LISTED UNDER: Connectors

Connector Family Features Touch-Safe Female Housings

May 8, 2008 8:42 am | Product Releases | Comments

The PowerMod HP (high power) series connector family features touch-safe female housings, cable strain relief, and integral positive latches. These safety features, combined with the ease of connector assembly, establish a new standard for cost effective high power connectors.

LISTED UNDER: Connectors

EMI Filtered D-Sub Connectors Offered With Shorter Lead Times

April 7, 2008 10:14 am | Product Releases | Comments

The high performance series 700 D-subminiature filtered connectors are offered with significantly shorter lead times&#151as short as two-weeks.

LISTED UNDER: Connectors

Board Stacking Connector Offers Better Signal Integrity

April 7, 2008 10:14 am | Smiths Connectors | Hypertac | Product Releases | Comments

The PC/104+ board stacking connector utilizes the unique Hypertac contact system. The Hypertac contacts improve the performance of the PC/104 platform by providing immunity to shock and vibration fretting and allowing for matched impedance and better signal integrity.

LISTED UNDER: Connectors

Quick Disconnects Connect Without Spray or Leakage

March 11, 2008 10:05 am | Beswick Engineering Co., Inc. | Product Releases | Comments

The dry break quick disconnect connects without any fluid spray or leakage and disconnects with minimal dead volume. The assembly is constructed of stainless steel throughout and weighs only 15 grams.

LISTED UNDER: Connectors
Advertisement

Tubing Connector Prevents Misconnections

March 11, 2008 5:10 am | Colder Products Company | Product Releases | Comments

The SRC connector provides medical personnel with an alternative&#151a tubing connector that is designed to eliminate potential misconnections that can occur with luer fittings.

LISTED UNDER: Connectors | Fittings

Plastic Connectors

February 14, 2008 6:43 am | ODU-USA, Inc. | Product Releases | Comments

The modified Medi-Snap plastic connector with a metal housing can be configured with two to 26 contact points. They have been tested to withstand over 2,000 mating cycles. These connectors are 100% touch proof and utilize a unique push-pull locking mechanism to ensure a secure connection.

LISTED UNDER: Connectors

Two-in-One Connector

February 14, 2008 6:43 am | Product Releases | Comments

The ST5 is a combination connector with a two-in-one design for interconnecting with a microSD card standardized by SDA and a GSM11.11 standard compatible plug in SIM card. In addition to its two-in-one combination design, the ST5 connector features a very low profile, with a height of only 2.

LISTED UNDER: Connectors

SEI to USB Adapter

January 15, 2008 8:30 am | US Digital | Product Releases | Comments

The SEI-USB is an interface module that connects the company’s SEI compatible devices to a standard USB 1.1/2.0 port.

LISTED UNDER: Connectors | Power Supplies | Wire and Cable

Test Connectors

January 10, 2008 10:59 am | Product Releases | Comments

Capable of sealing down to 0.015 inches OD, the ME001 connector is designed for leak testing infusion set and drug delivery devices. Its compact 0.

LISTED UNDER: Connectors | Microbiology/Chemical Testing | Leak Testing

Headers

December 10, 2007 9:56 am | Product Releases | Comments

The Mini-Fit RTC (RoHS temperature capable) headers provide a cost-effective solution for mid-range power applications that require high-density and current-carrying capability.

LISTED UNDER: Connectors

Connection Fittings

November 13, 2007 6:38 am | Product Releases | Comments

Over-tightening fittings results in poor fluid connections and leaky processing. Click-N-Seal connection fittings eliminate this process variable by providing objective feedback that the required torque for a proper seal has been achieved, thereby preventing excess torque.

LISTED UNDER: Connectors | Fittings

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading