Advertisement

SMT Connectors

October 11, 2007 9:43 am | Product Releases | Comments

To meet the growing market demand of smaller electronic devices, the SlimStack product line now includes J-Lead SMT connectors. These board-to-board connectors feature a “J”-shaped SMT tail that provides 35% PCB width space savings versus standard gull-wing style tails.

LISTED UNDER: Connectors

Custom Electrical Terminals

October 11, 2007 9:43 am | Product Releases | Comments

Custom electrical terminals for overmolded medical devices are manufactured to specification for integration with discrete component overmolding and are supplied on reels or loose for use with various automation systems. Produced in sizes from 0.008 to 0.09 in. thick with &#1770.002 in.

LISTED UNDER: Connectors

Pin Connectors

October 9, 2007 11:24 am | Onanon | Product Releases | Comments

Compliant pin technology has stood the test of time by providing press-fit connections that withstands thermal shock, vibration, and humidity.

LISTED UNDER: Connectors
Advertisement

PTFE Terminals

October 9, 2007 11:24 am | Keystone Electronics Corp. | Product Releases | Comments

Engineered for high density packaging on 0.062 and 0.093(TH) PC boards, these PTFE terminals provide outstanding electrical, mechanical, thermal, and chemical characteristics. Rugged and resistant to mechanical shock and vibration, they operate within the temperature range of -85&#176F to 400&#176F.

LISTED UNDER: Connectors

CAN-Ethernet Gateway

September 10, 2007 9:46 am | Esd Electronics, Inc | Product Releases | Comments

EtherCAN is a CAN-ethernet gateway that converts from CAN into ethernet to overcome the limited physical length of CAN networks. Since CAN technology was originally developed for the automotive industry, it has limitations for high-speed data transmission (1 MBit/sec) at distances of over 50 ft.

LISTED UNDER: Connectors

Protective Connector Caps

September 10, 2007 6:53 am | Binder Usa | Product Releases | Comments

M8 protective caps, when applied to unmated connectors, ensure a protection rating of IP67. The caps feature a PA (polyamide) body, PUR (polyurethane) retaining strap, and a nitrile rubber (NBR) seal&#151a common material used for o-rings.

LISTED UNDER: Connectors

Medical Connector Line

August 10, 2007 5:14 am | Product Releases | Comments

This line of circular plastic connectors (CPC), named CPC – Medical, is designed for use in surgical instruments, RF and ultrasound ablation, and electronic patient monitors used in the operating room.

LISTED UNDER: Connectors

Connector (4233)

August 10, 2007 5:14 am | Anderson Materials Evaluation | Product Releases | Comments

Ideal for medical applications, the multi axial rotational connector (MARC) is designed to mate while traveling through an arc with a 3-inch minimum radius. The MARC is rated to 30 Amps while combining power, signal, and ground circuitry into one package.

LISTED UNDER: Connectors
Advertisement

Disposable Connector

August 10, 2007 5:14 am | Fischer Connectors, Inc. | Product Releases | Comments

The high performance and low cost Limited Use Connector (L.U.C.) is ideally suited for the demanding environment of today’s high tech operating rooms. The disposable L.U.C. provides excellent quality allowing the medical design engineer to create a solution that ensures reliability and ease of use.

LISTED UNDER: Connectors

Shielded Nano Connectors

July 5, 2007 12:14 pm | Omnetics Connector Corp. | Product Releases | Comments

The metal Bi-lobe nano-miniature connectors are available with patent pending sealed backshells and braided cable shielding to reduce crosstalk and EMI problems in today’s high density electronic modules.

LISTED UNDER: Connectors

Connector System (3919)

March 12, 2007 1:25 pm | Fci | Product Releases | Comments

Designed for cabling applications in equipment with high power demands, the Pwr TwinBlade connector system provides current-carrying capacity of up to 50 A per contact. The system features a “touch-proof” design and is polarized to assure proper orientation during connector engagement.

LISTED UNDER: Connectors

Insulated Terminals

March 12, 2007 1:24 pm | Product Releases | Comments

Insulated disconnects feature an open barrel “F” crimp wire attachment to ensure a high integrity connection and are constructed from a high temperature alloy and fire-retardant nylon insulator. Available in flag and straight styles to mate with 0.11 x 0.02, 0.187 x 0.02, and 0.25 x 0.032 in.

LISTED UNDER: Connectors

Connectors (3869)

March 12, 2007 1:24 pm | Jae Electronics | Product Releases | Comments

The WH1 Series of low profile board-to-board connectors meet the needs of slim electronic devices. The connector has 0.4 mm contact spacing and a mated stacking height of only 1.0 mm.

LISTED UNDER: Connectors

Power Connectors

January 18, 2007 11:36 am | Fci | Product Releases | Comments

The AirMax VS backplane connector system has been expanded with the addition of two new power connector variants developed to address customer requirements.

LISTED UNDER: Connectors

Adapters (3713)

January 18, 2007 11:36 am | Binder Usa | Product Releases | Comments

To maximize usability, turnable metal threaded rings have been added to both ends of the 765/768 series M8 to M12 adapters. This change allows easier mating of connecting cables. The 765 series adapters are available in 3 and 4 pole versions and in a variety of configurations.

LISTED UNDER: Connectors

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading