Advertisement

Adapters (3713)

January 18, 2007 11:36 am | Binder Usa | Product Releases | Comments

To maximize usability, turnable metal threaded rings have been added to both ends of the 765/768 series M8 to M12 adapters. This change allows easier mating of connecting cables. The 765 series adapters are available in 3 and 4 pole versions and in a variety of configurations.

LISTED UNDER: Connectors

Cable Connector

December 5, 2006 12:21 pm | Jae Electronics | Product Releases | Comments

Designed to connect 0.3 mm pitch FPC cable to the board, the FF02S Series connector has a height of only 0.9 mm and a 3.8-mm depth. It has undergone drop impact and vibration resistance testing and provides improved cable retention.

LISTED UNDER: Connectors

Panelmount Socket

December 4, 2006 4:39 am | Binder Usa | Product Releases | Comments

The reduced footprint 713 series M12 male sockets allows fastening from the back side of a panel and reduces the required surface area for mounting. The design features an M12 rear thread allowing the connector to be mounted to a panel having a thickness of up to 3.0 mm.

LISTED UNDER: Connectors
Advertisement

Multipin Connectors

November 6, 2006 11:12 am | Itt Electronic Components | Product Releases | Comments

The versatile VEAM CIR Series connectors can function as electrical, optical, or pneumatic connectors, providing design engineers with the ability to simplify receptacle design processes and inventory. It is also available in high voltage, twin or tri-axial, hermetic, and EMC versions.

LISTED UNDER: Connectors

Cable Plugs

November 6, 2006 5:02 am | Samtec, Inc. | Product Releases | Comments

Tiger Eye contacts are used in Micro Mate discrete wire cable plugs (SFSD Series) to provide cable-to-board solutions for the popular TFM/SFM Series board-to-board interconnect system. These polarized plugs are available with 28 or 30 AWG wire with 20, 40, or 60 contacts.

LISTED UNDER: Connectors | Wire and Cable

Microminiature Connectors

November 6, 2006 5:02 am | Itt Electronic Components | Product Releases | Comments

Specific part numbers of the company’s connector line are available at a lead time of two to three weeks. This program extends upon the recently announced ability to offer approximately 1,500 part numbers at a standard four- to six-week lead-time.

LISTED UNDER: Connectors

I.V. Drug Delivery Takes Another Evolutionary Step

October 13, 2006 9:50 am | Hospira, Inc. | Product Releases | Comments

I.V. containers have not experienced significant change since the introduction of plastic to replace glass in the 70s. This I.V. bag offers a variety of features that address many concerns healthcare providers have with today’s more traditional options. Hospira Inc.

LISTED UNDER: Transfer Devices | Full Service Contract Manufacturing

RoHS-Compliant Headers

October 13, 2006 9:47 am | Sullins Electronics Inc | Product Releases | Comments

These 0.079 in. and 0.1 in. board-to-board connectors are 100% RoHS-compliant. Male and female headers are offered in single, double, and quad row configurations, and in both plated through-hole (PTH) and surface mount (SMT) versions.

LISTED UNDER: Connectors
Advertisement

Connectors (3403)

October 9, 2006 12:09 pm | Anderson Materials Evaluation | Product Releases | Comments

The PowerMod HP “B” series connector family features touch-safe female housings, cable strain relief, and integral positive latches. These safety features, combined with the ease of connector assembly, establish a new standard for cost effective high power connectors.

LISTED UNDER: Connectors

Strain Relief Clamps

September 7, 2006 5:49 am | Product Releases | Comments

Strain relief clamps are made from heavy galvanized steel and clamp onto a cable or cord inside the equipment to protect the cord from damage caused by pulling or stretching.

LISTED UNDER: Clamping Devices

Thermocouple Contact Connectors

August 8, 2006 12:51 pm | Positronic | Product Releases | Comments

High reliability thermocouple contacts are offered for standard and high-density D-subminiature as well as circular connector products. The thermocouple contact line has recently been extended to include combination D-subminiature connectors.

LISTED UNDER: Connectors

Miniature Medical Connectors (3233)

August 8, 2006 12:50 pm | Omnetics Connector Corp. | Product Releases | Comments

Medical connectors need to be small, lightweight, and comfortable in use, but built for rugged handling and extended performance and reliability. These miniature medical interconnects suit those needs. Standard and custom designs and shapes have been applied to catheters, probes, and instruments.

LISTED UNDER: Connectors | Prototyping

Miniature Medical Connectors

July 5, 2006 11:07 am | Omnetics Connector Corp. | Product Releases | Comments

Medical connectors need to be small, lightweight, and comfortable in use, but built for rugged handling and extended performance and reliability. Standard and custom interconnect designs and shapes have been applied to catheters, probes, and instruments.

LISTED UNDER: Connectors | Prototyping

ZIF Connectors

May 2, 2006 8:29 am | Itt Electronic Components | Product Releases | Comments

The Cannon DLP series of Zero Insertion Force (ZIF) connectors provide greater contact reliability and reduced signal crosstalk. With a minimum rated life of 10,000 mate/unmate cycles and no loss in performance, DLP series connectors can be mated/unmated in less than two seconds.

LISTED UNDER: Connectors

Signal Tap Box

April 18, 2006 6:57 am | Bioconnect | Product Releases | Comments

This signal tap box, part number 7B5311D0, is designed to tap a signal from a standard 10-lead EEG signal for strip chart recording, saving to an electronic file or “out of the room evaluation” such as a sleep lab. Lead length, wiring configurations, connectors, and labels can be customized.

LISTED UNDER: Connectors

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading