Advertisement

Liquid Diaphragm Pump

September 7, 2006 5:49 am | Product Releases | Comments

The LTC liquid diaphragm pump achieves optimal performance by incorporating several innovative features to eliminate leaking and enhance dry self-priming. The patent pending Fluid-Blok advanced sealing technology eliminates leaks.

LISTED UNDER: Diaphragm Pump | Diaphragm Pump | Flow
Advertisement

Choosing a Vent Membrane for a Medical Device

September 5, 2006 7:16 am | Millipore Corporation | Product Releases | Comments

Hydrophobic polymeric membranes are widely used in medical devices to sterilize gases which pass through them or to provide sterile barriers between the atmosphere and device interiors.

LISTED UNDER: PTFE | Insert Molding | Micro Molding

Embedded High Performance Analog Simplifies Portable Medical Design

August 4, 2006 7:17 am | Product Releases | Comments

As more portable electronic medical devices are introduced to monitor and treat patients, manufacturers are seeking technologies with which to reduce the complexity involved in the design of the finished product.

LISTED UNDER: Microprocessor-Based Controls | Medical Device Testing | Component Testing

Foam Expands Material Choices for Medical Device Manufacturers

August 4, 2006 7:17 am | The United Group | Product Releases | Comments

Reticulated polyurethane foam handles a wide range of medical and healthcare tasks with ease in devices ranging from blood oxygenators, transdermal patches, and EKG pads to pre-op sponges, surgical drapes, and neck braces.

LISTED UNDER: Foam | Compressor | Medical Device Testing

Internal Form and Finish Critical to Manufacture of Heart Pump

August 4, 2006 7:17 am | Mitutoyo America Corporation | Product Releases | Comments

The Project: Verify that geometry and surface texture of the housing for a heart pump will facilitate smooth functioning while not adversely affecting blood. The Solution: Use extremely accurate instrumentation to measure form and surface to ensure they are compliant with specifications.

LISTED UNDER: Measurement Instruments | Biocompatibility Testing | Microbiology/Chemical Testing

Gas Plasma: A Green Alternative for Surface Engineering

July 5, 2006 11:02 am | Plasmatech, Inc. | Product Releases | Comments

There are many methods with which to affect the surface of a material or device to achieve a desired effect. Therefore, factors related to the process such as environmental considerations or temperature concerns will reduce the number of possible options.

LISTED UNDER: Surface Modification | Vacuum | Cleanroom Assembly

Butterfly Valve (3071)

May 2, 2006 8:29 am | Asahi/America, Inc. | Product Releases | Comments

The Type 57 Butterfly Valve incorporates four major design upgrades in thermoplastic valve technology. New design features include a flange stopper, which prevents the valve liner from over compression. A second feature is a molded body absorption channel.

LISTED UNDER: Other | Flow

Industrial Air Compressor

May 2, 2006 8:29 am | Sullair Corp. | Product Releases | Comments

A series of air compressors&#151the Sullair 3000, Sullair 3700, and Sullair 4500&#151offer 40, 50, and 60 horsepower and are designed for point-of-use facility installations.

LISTED UNDER: Air Pump | Compressor

Concentrator Valve Assembly

May 2, 2006 8:29 am | Humphrey Products Company | Product Releases | Comments

A manufacturer of O 2 concentrators for in-home oxygen therapy wanted a unit that would simultaneously fill portable bottles while supplying the patient.

LISTED UNDER: Other | Flow | Solenoid Valve

Silicone Elastomers for Healthcare Tubing

April 4, 2006 7:38 am | Momentive Performance Materials Inc. | Product Releases | Comments

With the variety of tubing options available to medical device manufacturers, it is often difficult to determine which type would be best suited to a particular application.

LISTED UNDER: Silicone | Vacuum | Injection Molding

Fan Filters

March 9, 2006 12:10 pm | Universal Air Filter Co. | Product Releases | Comments

Meet thermal management and air filtration requirements for blowers and fans&#151axial flow, cross flow, intelligent fan packs, pancake styles&#151with low-profile, low-air resistance filters.

LISTED UNDER: Air Pump

Gas Metering Valve (2891)

March 9, 2006 12:10 pm | South Bend Controls, Inc. | Product Releases | Comments

The gas metering valve is a direct-acting proportional Servoid valve. The Servoid valve driver provides linear proportional control of the metering orifice which yields linear proportional flow.

LISTED UNDER: Other | Proportional | Control

Emphasis on Motion Control: Turning to Ball Screw Technology

February 7, 2006 5:39 am | Skf Usa Inc. | Product Releases | Comments

Precise motion control is critical in a number of medical devices. Unfortunately, with the many options available to manufacturers, it is often difficult to know which solution is ideal for a particular application.

LISTED UNDER: Ball and Lead Screws | Heating Elements | Air Pump

Rotary Selector Valves

February 6, 2006 10:29 am | Beswick Engineering Co., Inc. | Product Releases | Comments

The selector valve can be used as a quiet replacement for solenoid valves. In the standard configuration; a single input can be switched between two to six output ports.

LISTED UNDER: Other

Inert Diaphragm Valves

February 6, 2006 10:29 am | South Bend Controls, Inc. | Product Releases | Comments

The inert diaphragm valve is a solenoid-operated diaphragm isolation valve designed for use with corrosive or high-purity fluids commonly found in the medical equipment industry. The materials of all surfaces in the flow path are inert and impervious to a wide range of aggressive fluids.

LISTED UNDER: Diaphragm Pump | Flow

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading