Advertisement

Circulation/Recirculation Magnetic Drive Pumps

July 25, 2013 3:55 pm | GRI Pumps | Products

The INTG2 recirculation pump incorporates two features that give OEM customers more flexibility and control of fluids in their system. The magnetically driven pump provides multiple supply voltage settings ranging from 9 to 27 volts as well as a speed control that gives OEMs the flexibility to change the pump’s speed in order to meet their system’s specific pressure and flow requirements. Equipped with a brushless DC motor, the magnetically driven INTG2 integrates the pump’s components into a compact, lightweight design, eliminating motor bearings and leaving the impeller assembly as the only moving part. Fewer parts promote longer life, quieter operation, lower power consumption, and mechanical integrity.

LISTED UNDER: Centrifugal | Chemically Inert | Magnetic-Drive

Bellows Metering Pumps

July 25, 2013 3:54 pm | GRI Pumps | Products

GRI's Bellows Metering Pumps utilize GRI’s proven bellows and valving technology to provide an accurate and long-lasting metering. The proprietary blended polypropylene materials of construction and a wide selection of valve and O-ring elastomers produce chemical resistant pumps capable of handling a wide range of fluids. Bellows Metering Pumps were specifically designed for metering applications requiring low discharge pressures. Bellows pumps have been successfully applied in photo, X-ray and dental film processors, silver recovery systems, scientific and analytical instruments, detergent dispensers, blood analyzing equipment, thermal therapy equipment, waste removal systems, and wastewater and water treatment systems.

LISTED UNDER: Bellows | Chemically Inert | Metering

Magnetic Drive Centrifugal Pumps

July 25, 2013 3:53 pm | GRI Pumps | Products

Magnetic drive centrifugal pump operation is similar to a standard centrifugal pump except the motor shaft seal is removed resulting in the elimination of leaks caused by shaft seal failure. Typical OEM applications include film processors, Laser and x-ray cooling systems, medical, scientific, laboratory, solar thermal heating and cooling applications, and silver recovery equipment. Magnetic drive centrifugal pumps must be used where flooded suction conditions exist.

LISTED UNDER: Centrifugal | Chemically Inert | Magnetic-Drive
Advertisement

Dosing Pump

July 25, 2013 3:52 pm | GRI Pumps | Products

GRI’s new Dosing Pumps are ideal for low flow, low pressure metering applications where a fixed flow rate is required. The Dosing Pumps are constructed entirely of plastic and use GRI’s time-proven bellows technology to provide a durable and accurate chemically resistant metering pump. When pumping water in laboratory test conditions, pumps rate at +/- 1%, stroke to stroke. As with all of GRI pumps, the Dosing Pumps are highly OEM customizable. A variety of configurations are available to meet many different system requirements. Typical applications include: Soap Dispensing, Chemical Dispensing, Appliance Market, Warewashing, Water Purification Market, Laboratory Market, HVAC Market, and OEM Markets requiring metering pumps

LISTED UNDER: Bellows | Chemically Inert | Metering

Gear Pumps

July 25, 2013 3:51 pm | GRI Pumps | Products

Gear pumps are designed primarily for metering and transfer applications. Their modular design allows a wide variation of flow ranges with a standard parts set. Gear pumps are self-priming and are “constant flow” pumps when RPM and differential pressure are constant. The materials of construction for bodies, gears and seals, provide a wide range of fluid compatibility.

LISTED UNDER: Chemically Inert | Metering

Oscillating Pumps

July 25, 2013 3:02 pm | GRI Pumps | Products

Oscillating pumps are self-priming, corrosion resistant, have no dynamic seals and are constructed from FDA accepted materials. Typical applications include film and microfilm processors; litho and graphic arts plate processors; detergent dispensing, chemical mixing, medical, scientific and laboratory equipment. These pumps are intended for replenishing, transfer and circulating installations.

LISTED UNDER: Chemically Inert | Positive-Displacement

Piston Diaphragm Pump

July 25, 2013 2:15 pm | GRI Pumps | Products

Piston diaphragm pumps are positive displacement pumps designed to economically transfer small volumes of fluid at low discharge pressures. The lightweight, compact pumps are self-priming, corrosion resistant and can handle viscous fluids. These features make the pumps ideal for high volume copy machines, scientific and laboratory instruments and other chemical dispensing applications.

LISTED UNDER: Diaphragm Pump | Positive-Displacement

Miniature OEM Pumps for Medical Diagnostic Instrumentation

July 12, 2013 5:23 pm | by MDT Staff | Product Releases | Comments

Miniature, Stepper driven Valveless OEM Pumps from Fluid Metering, Inc. (FMI) are ideal for low and micro-volume fluid control in Medical Diagnostic and Clinical Chemistry Instrumentation. FMI OEM pumps integrate FMI's unique patented CeramPump valveless pumping principle with precision stepper control.

LISTED UNDER: Other
Advertisement

Pumps Bring Reliability to Gas and Leak Detection Warning Devices

July 8, 2013 5:44 pm | by MDT Staff | Product Releases | Comments

Designed for handheld gas and leak detection warning devices, the new 1010 Series diaphragm compressors and pumps from Thomas have been tested for 4,000 hours of nonstop operation providing the utmost in reliability and safety.

LISTED UNDER: Compressor | Diaphragm Pump

Rocking Piston Pump or Compressor

June 6, 2013 9:53 am | All-Star Products | Products

The rocking piston pump is an oil-free compressor or vacuum pump that is a compact and reliable source of high pressure (to 115 psig) or vacuum (to 29.1 "Hg) at moderate flows of 0.035 to 6.3 CFM. They are available for use on AC or brushless DC power, and as standard or special designs. These pumps are very efficient compared to other types of pumps, such as a diaphragm pump. They are frequently used in medical and dental applications such as autoclaves, sterilizers, dental vacuums, oxygen concentrators, blood analysers, gas analyzers, dryers, water aspirators, electron microscopes, spectrometers, pneumatic beds,nebulizers and blood pressure instrumentation.

LISTED UNDER: Air Pump | Compressor | Piston

Rotary Vane Pump or Compressor

June 5, 2013 9:20 pm | All-Star Products | Products

All-Star's rotary vane pump or compressor is 100% oil-free and provides pressure up to 22 psig, or vacuum up to 29.5"Hg at a maxinumflow of 90 SCFM. Manufactured with the latest CAD and CAE technology and precision CNC machining centers, All-Star customers have the highest quality pump compressor made today. The All-Star 100% oil-free Rotary Vane Pump is manufactured in accordance to ISO 9000:2001, is CE Compliant and UL Component listed. Featuring carbon vanes have a design rating of a minimum of 20,000 service hours. Its rugged construction will provide years of outstanding service in even the most demanding applications.

LISTED UNDER: Air Pump | Compressor | Rotary

TurboBlower

June 5, 2013 4:58 pm | All-Star Products | Products

The All-Star TurboBlower is a high flow (to 1700 CFM) low pressure (to 16"H2O) blower. The blower provides oil-free and non-pulsating air suitable for conveying and other applications. It is available in single and three phase power models, with horsepower ratings to 5 HP.

LISTED UNDER: Air Pump | Centrifugal

Regenerative Blower

June 5, 2013 2:10 pm | All-Star Products | Products

All-Star regenerative blower provides an oil-free, non-pulsating, clean air flow from 25 to 900 SCFM. A regenerative blower can be used for vacuum (to 19"Hg) or pressure (to 11.5 psig) in applications requiring minimum maintenance. All-Star regenerative blower is the only manufacturer to test the blower's performance according the ANSI/AMCA 210-85 Laboratory test standards that allows the blower to be returned if it does not meet its published performance. To celebrate All-Star's 15th year anniversary, a high temperature model has been introduced that further guarantees continued performance for demanding applications.

LISTED UNDER: Air Pump | Oil-less | Vacuum

OEM Liquid Pumps: High Pressure Transfer with Micro Footprint

June 4, 2013 4:38 pm | by MDT Staff | KNF Neuberger, Inc. | Product Releases | Comments

KNF Neuberger OEM self-priming micro-diaphragm liquid transfer pumps offer design engineers a unique combination of performance and application flexibility in a remarkably small package – as small as 1.5” in length. They are rated to operate continuously against pressures as high as 87 PSIG...

LISTED UNDER: Other

OEM Component Compressor

May 29, 2013 3:18 pm | by MDT Staff | GSE - OEM Compressors & Pumps | Product Releases | Comments

The GSE model ZW400 oil-less air compressor offers OEM Engineers a viable option for applications in the medical, dental, environmental, lab, food processing and industrial markets. With high flow output, the most demanding design specifications will be covered.

LISTED UNDER: Compressor

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading