Advertisement

Pumps Offer Reliability, Safety to Gas, Leak Detection Warning Devices

December 14, 2012 11:57 am | Product Releases | Comments

Designed for handheld gas and leak detection warning devices, the new 1010 Series diaphragm compressors and pumps from Thomas have been tested for 4,000 hours of nonstop operation providing the utmost in reliability and safety.

LISTED UNDER: Compressor | Diaphragm Pump | Compressor

High Airflow Sensors

December 12, 2012 3:19 pm | Product Releases | Comments

Honeywell announced it has expanded its Zephyr™ airflow sensor HAF Series portfolio with new digital versions that provide airflow ranges of 0 to 20 SLPM (Standard Liters per Minute) and 0 to 200 SLPM.

LISTED UNDER: Flow | Fittings | Air Pump

OEM Pumps Designed for the Surgical Ablation Market

December 12, 2012 10:03 am | Watson Marlow Pumps Group | Product Releases | Comments

Watson-Marlow Pumps Group is unveiling a new range of 400RXMD OEM pumps, specifically designed for the surgical ablation market, in booth #1713 at MD&M West, from February 12-14, 2013, at the Anaheim Convention Center, in Anaheim, CA.

LISTED UNDER: Other
Advertisement

KNF Neuberger, Inc. - Pump offers higher flow in compact package

December 6, 2012 10:54 am | KNF Neuberger, Inc. | Products

A new KNF micro diaphragm gas-sampling pump, type NMP015.1.2, uniquely integrates head connections inside the housing for improved pneumatic performance in a compact and leak-tight package. This optimized design produces less pulsation and additionally allows for the housing to be closed and sealed for significant reduction in audible noise. The pump ideally suits portable, battery-operated equipment used in a wide range of OEM applications, including gas sampling, explosives detection devices, anesthesia systems, and medical analyzers, among others. Among features, the pump's elastomeric diaphragm promotes high efficiency and delivers oil-free operation without any risk of contaminating the sampled gas. Pumps can be specified either with an ironless core DC motor or with a brushless DC motor offering longer service life. PEEK housings and pump heads contribute high stiffness and temperature and chemical resistance. Depending on model, these pumps can achieve flow rates to 2.1 l/m, vacuum to 650 mbar (11 in. Hg) absolute, and continuous pressure to 0.6 bar g (9 psig). All are engineered to perform maintenance-free with low power requirements and are supplied ready for installation to operate in any position. Chemically resistant versions are available and pumps can otherwise be customized to meet particular application demands.

LISTED UNDER: Air Pump | Compressor | Diaphragm Pump

KNF Neuberger High-Pressure Micro Diaphragm Pump

December 6, 2012 10:41 am | KNF Neuberger, Inc. | Products

The new KNF “Type NF1.25” micro diaphragm pump introduces an ideal high-pressure solution for dosing or transferring liquids or liquid-gas mixtures at flow rates up to 300 ml/min. This small and powerful pump is engineered to operate either intermittently or continuously against pressure up to 6 barG (87 psig) over the pump’s entire lifetime. Versions can be specially developed to handle even greater pressure up to 10 barG (145 psig). Typical OEM applications include medical devices and analyzers, inkjet printers, cleaning and disinfectant devices, water treatment systems, fuel cells, and semiconductors, among many others. Type NF1.25 pumps integrate a patented valve system and benefit from sophisticated diaphragm technology to achieve high levels of efficiency. OEMs can choose from a wide selection of motors, including iron core DC, ironless core DC, or brushless DC (BLDC) versions. The BLDC models can be supplied with simple 2-wire operation or with 4 wires enabling advanced tachometer output and speed control input and a highly linear control curve (flow rate vs. control voltage) allowing for use in closed-loop systems. A wide range of standard voltages and frequencies can be specified. These pumps are self-priming, can run dry, and require virtually no maintenance over a long lifetime. They offer superior chemical resistance resulting from the use of PP, PTFE, EPDM, and FFMP materials for components that will come into contact with the pumped medium. Most neutral and aggressive liquids can be handled without risk of corrosion or other damage. Specialized complementary accessories can be supplied, including an innovative anti-vibration mounting plate with the capability to dramatically reduce vibration levels and audible noise. Pumps can be mounted in any position.

LISTED UNDER: Chemically Inert | Diaphragm Pump | Peristaltic

KNF Neuberger, Inc. - FMM80 Solenoid-Driven Diaphragm Metering Pump

December 6, 2012 10:28 am | KNF Neuberger, Inc. | Products

The new KNF FMM80 solenoid-driven diaphragm metering pump introduces an ideal solution to dispense liquids accurately in adjustable volumes between 30 microliters/stroke and 80 microlitrs/stroke. This pump – the latest in a growing family of KNF solenoid pump solutions and engineered to achieve significantly higher dose rates – can be driven with single impulses to deliver discrete micro-volumes or can be operated with a pulsed signal at a frequency up to 10Hz to provide continuous flow rates up to 48 ml/min. Typical applications include medical devices and diagnostic equipment, industrial dosing systems, inkjet printers, water treatment systems, and fuel cells, among many others. The FMM80 pump offers industry-leading service life (more than 500 million strokes), integrates a patented noise-suppression system for quiet-running operation, remains flow-tight in both directions with pressures of 14.5 PSIG at rest, exhibits stability against varying pressure, and sustains high repeatability over the pump’s entire lifetime. The pump’s diaphragm and patented valve system contribute to overall reliability and high performance. A wide selection of available head materials (PP, PVDF, EPDM, FFPM, or PTFE) enable the transfer of virtually all liquids, whether neutral or aggressive, and the pump can be mounted easily in any position using either a manifold or tubing. Value-added accessories include pressure control valves and pulsation dampeners and custom pump solutions can be developed to meet particular application needs.

LISTED UNDER: Chemically Inert | Metering | Solenoid

Fiber-Pigtailed Sapphire Lasers

December 6, 2012 9:10 am | Product Releases | Comments

Coherent Inc. has introduced a new range of fiber-pigtailed (FP) lasers into its well-established portfolio of FP products. The new Sapphire™ FP lasers are compact, CW, visible lasers that offer...

LISTED UNDER: Lasers | Air Pump

Solenoid-Driven Diaphragm Metering Pump

December 3, 2012 11:40 am | KNF Neuberger, Inc. | Product Releases | Comments

The new KNF FMM80 solenoid-driven diaphragm metering pump introduces an ideal solution to dispense liquids accurately in adjustable volumes between 30 ml/stroke and 80 ml/stroke.

LISTED UNDER: Diaphragm Pump | Metering | Solenoid
Advertisement

Tubing Pumps Offer Improved Performance and Ease of Use

November 20, 2012 4:56 pm | Product Releases | Comments

Masterflex C/L Tubing Pumps from Cole-Parmer now feature a redesigned head with significant mechanical and ergonomic improvements. The new head provides more secure tubing retention...

LISTED UNDER: Peristaltic | Fittings | Peristaltic

Peak Performance Hose Pump

November 20, 2012 4:52 pm | Product Releases | Comments

Bredel, the world leader in peristaltic hose pumps, introduces its new APEX range, the optimized pump designed to suit all dosing, metering and transfer duties between 0.7 - 317 GPH.

LISTED UNDER: Other | Peristaltic | Flow

State-of-the-Art Miniature Micropump for Air, Gas & Fluid Delivery

October 4, 2012 4:56 pm | Product Releases | Comments

Servoflo Corporation of Lexington, Massachusetts is pleased to announce the MP-6 Series of micropumps. Based on piezoelectric diaphragm pump technology, the MP-6 micropump delivers air, gas or liquid...

LISTED UNDER: Air Pump | Diaphragm Pump | Other

Small, Lightweight Brushless DC Pump

September 28, 2012 10:43 am | Product Releases | Comments

The Thomas 230 Series, a brushless DC WOB-L® air compressor designed for medical and other applications requiring a compact, lightweight pump with variable output.

LISTED UNDER: Air Pump | Compressor | Compressor

Vacuum Handling Solutions for Medical Applications

September 27, 2012 11:20 am | Product Releases | Comments

Virtual Industries Inc., a leading supplier of manual vacuum handling solutions, announces that it will display several advanced systems for medical applications in Booth #1358 at the upcoming...

LISTED UNDER: Vacuums | Diaphragm Pump | Vacuum

Smaller Brushless DC Motor Standard for OEM Diaphragm Pumps

September 19, 2012 10:16 am | KNF Neuberger, Inc. | Product Releases | Comments

KNF introduces a new small brushless DC motor (Type BL30) as standard and readily available for integration into a wide range of liquid and gas diaphragm pumps for OEM applications.

LISTED UNDER: Brushless DC Motors | Diaphragm Pump | Compressor

E-LFL Tubing Replaces Masterflex Tygon LFL Tubing

September 17, 2012 10:22 am | Product Releases | Comments

The new Masterflex® Tygon® E-LFL Tubing from Cole-Parmer is now available for use in Masterflex peristaltic pumps. This new Tygon tubing formulation is replacing the discontinued Masterflex LFL tubing from Cole-Parmer.

LISTED UNDER: Thermoplastic Elastomer | Peristaltic

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading