Advertisement
Valves

Proportional Valve

April 14, 2014 9:01 am | by MDT Staff | Humphrey Products Company | Product Releases | Comments

Introducing the PC3 Proportional Valve and the kick-off of the Humphrey of proportionally controlled products. ProControl Proportional Valves are uniquely designed using a frictionless flat-spring armature design that results in long, trouble-free...

LISTED UNDER: Proportional
Advertisement

Pneumatic Closed Needle Valve

April 11, 2014 8:25 am | by MDT Staff | Dymax Corporation | Product Releases | Comments

Dymax Corporation’s Model 485 pneumatic, normally closed needle valve is designed to deliver precise dots or very fine beads of low- to high-viscosity fluids.  The valve’s stroke adjustment allows for fine-tuning of the dispense volume...

LISTED UNDER: Dispense

Solenoid Valve Connectors

March 24, 2014 10:25 am | by MDT Staff | Product Releases | Comments

Mencom’s Solenoid Valve Connectors meet the DIN 43650 Industry Standard and are ideal for providing power and protection to solenoid valves and PLCs on the factory floor.

LISTED UNDER: Connectors | Solenoid Valve

Precision Valve Controller Offers Next Generation Dispense Functionality

March 7, 2014 12:59 pm | by MDT Staff | Nordson Corporation | Product Releases | Comments

Nordson EFD has introduced the new ValveMate 9000, state-of-the-art precision valve controller. The intricate microprocessor circuitry ensures the dispensing of precise, accurate, and repeatable amounts of the adhesives, lubricants, and other assembly fluids used in many of today's advanced products...

LISTED UNDER: Timers and Controllers | Other

Innovation Award Winning Metering Ball Valve

March 6, 2014 2:32 pm | by MDT Staff | Product Releases | Comments

HAM-LET's metering ball valve (MBV) incorporates both metering and shut-off functions in one unit, has been patented in the US and won HAM-LET recognition for its innovative technology. The MBV series valve combines an accurate micro-meter control mechanism for gases and liquids with a sealing mechanism in a single unit...

LISTED UNDER: Ball

Porous Polymer Valves for Fluid Management Devices

February 25, 2014 7:16 pm | by MDT Staff | Porex Medical Products | Product Releases | Comments

A fundamental requirement for designing medical devices is the constant improvement in patient care and protection of healthcare workers. This requirement is especially critical for fluid management devices...

LISTED UNDER: Other

Manifold Mounted Multi Check Valves

February 21, 2014 3:41 pm | by MDT Staff | Clippard Instrument Laboratory, Inc. | Product Releases | Comments

Clippard’s efficient R-614 Multi Check Valve integrates four check valves in one compact valve body. Take advantage of the many features of this versatile line including easy manifold mounted design, integrated circuitry, Octoport outlet design, maximized performance and more...

LISTED UNDER: Check

Hemostasis Valve with Sideport Tubing & Stopcock

February 21, 2014 3:35 pm | by MDT Staff | Qosina | Product Releases | Comments

Qosina has introduced the addition of two new hemostasis valves with sideport tubing connection to a stopcock. The valves feature a closed seal, which eliminates the need for manual rotation, for items sized 0 FR - 9 FR (0 inch - 0.118 inch) (0 mm – 3 mm) in diameter...

LISTED UNDER: Other

Ball Valves Require Less Power, Provide Smaller Footprint

February 14, 2014 3:42 pm | by MDT Staff | Product Releases | Comments

Clark Solutions has introduced the 8P Series of Direct Mount Pneumatic Actuated Ball Valves. Available in 18 brass or stainless steel models with 2-way or 3-way configurations and 1/4" to 4" pipe sizes, 8P Pneumatic Actuated Ball Valves can be customized by original equipment manufacturers to meet the requirements of virtually any application.

LISTED UNDER: Ball

Automated Precision Dispensing Options at MD&M

February 13, 2014 4:49 pm | by MDT Staff | Nordson Corporation | Product Releases | Comments

Nordson EFD announced that it will exhibit in Booth #2911 at the upcoming MD&M West Conference and Expo, from February 11-13, 2014 at the Anaheim Convention Center in Anaheim, CA. Nordson EFD's technical experts will showcase a range of advanced fluid dispensing systems...

LISTED UNDER: Dispense

Spray Valve System Applies Oils, Grease, & Lubricants

February 11, 2014 1:25 pm | by MDT Staff | Nordson Corporation | Product Releases | Comments

Nordson EFD is working with manufacturers around the world to help them improve their lubrication process and control fluid costs with its 781S Spray Valve. This valve enables precise and consistent application of medium-viscosity oils, grease, reagents, marking inks, and adhesive activators...

LISTED UNDER: Other

Handheld Needle Valve Offers High Dispensing Precision

February 10, 2014 4:48 pm | by MDT Staff | Dymax Corporation | Product Releases | Comments

Dymax Corporation’s Model 400 pneumatic, normally closed needle valve is designed to deliver precise dots or very fine beads of low- to medium-viscosity fluids. Accurate, repeatable dispensing can be achieved by utilizing the valve’s material flow adjustment to control shot volume...

LISTED UNDER: Needle

Valve Integrated Pressure Regulator

January 30, 2014 5:23 pm | by MDT Staff | Product Releases | Comments

Harrison Valve released a new advanced Valve with Integrated Pressure Regulator technology to the Medical and Industrial Gas Markets named the OMNIValve.

LISTED UNDER: Pressure/Vacuum

Needle-free Swabbable Valves Designed to Combat Infection

January 20, 2014 5:19 pm | by MDT Staff | Value Plastics, A Nordson Company | Product Releases | Comments

Value Plastics has introduced a cost efficient needle-free swabable valve series featuring higher flow rates, low priming volumes, and a straight through design for unobstructed flow. Designed for the injection and aspiration of fluids, particularly for IV applications, urology, blood processing, cardiology, pharma, and disposable biopharm...

LISTED UNDER: Flow

Low Maintenance Handheld Dispensing Valve

December 18, 2013 4:27 pm | by MDT Staff | Dymax Corporation | Product Releases | Comments

The new Dymax Model 300 dispensing system features a pneumatic, normally closed diaphragm valve that is designed for use with low- to medium-viscosity fluids. The valve’s diaphragm design prevents fluid from contacting the actuating components.

LISTED UNDER: Dispense

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading