Advertisement

Self-Locking Nuts (3903)

March 12, 2007 1:24 pm | PennEngineering | Product Releases | Comments

PEM self-locking nuts offer advantages over standard clinch nuts by enabling permanent installation in even thinner metal sheets and closer to edges.

LISTED UNDER: Fasteners

Heat Shrinkable Tubing (3883)

March 12, 2007 1:24 pm | Parker Texmed | Product Releases | Comments

A full line of Texfluor FEP heat shrinkable tubing is offered in a variety of expansion ratios. It operates in temperatures as high as 400&#176F and is ideal for covering medical instruments, thermometers, lighting fixtures, and other instruments where protection is needed.

LISTED UNDER: Heat-Shrink | Fittings

Powered Equipment Cart

February 7, 2007 9:41 am | Newcastle Systems | Product Releases | Comments

The NB400 powered equipment cart was developed to provide true mobility within a facility. With a computer on board, it is designed to ensure access to the latest information and to provide the means to operate equipment anywhere in a facility even in the most remote corners.

LISTED UNDER: Carts and Workstations
Advertisement

Self Priming Filters

January 18, 2007 11:37 am | Qosina | Product Releases | Comments

HiFlo self priming 0.2 micron filters have tube ports with 0.12 in. OD. They are also available with 0.15 inch ID socket ports. These filters allow for a flow rate of 25 ml per minute at 36 in. H 2 0 head height.

LISTED UNDER: Hydrophobic | Fittings

Customized Machined Springs

January 18, 2007 11:36 am | Helical Products Co. | Product Releases | Comments

Customized machined springs are available in a variety of configurations and materials to accommodate those with precise spring requirements. The springs are curved beams machined from a single piece of material into the special configuration desired.

LISTED UNDER: Springs

Miniature Adapter Fittings

January 18, 2007 11:36 am | Beswick Engineering Co., Inc. | Product Releases | Comments

Markets for most “high tech” products have become global. To better serve this global marketplace, many OEMs are attempting to specify metric fluid power components in their new product designs.

LISTED UNDER: Fittings | Fittings | Product Design

Springs

January 18, 2007 11:36 am | Lee Spring Co | Product Releases | Comments

A unique line of low pressure, high index Lite Pressure Stock Springs are designed to provide 1 to 5 psi in large diameters. Common applications for these soft springs can include syringes, relief valves, check valves, dispensers, and pistons.

LISTED UNDER: Springs

Fastener Coating

December 5, 2006 12:21 pm | Nylok Corp. | Product Releases | Comments

There is no need for gasket seals or sealant compounds or any other time-consuming in-house assembly sealants.

LISTED UNDER: Fasteners | Device Coating
Advertisement

Swivel Casters (3541)

November 6, 2006 11:12 am | Revvo Caster Company, Inc | Product Releases | Comments

With a load capacity of 220 lbs., 25% greater than its standard PlasTech models, this swivel caster is available in three twin-wheel models, each with a wheel diameter of 4 in.

LISTED UNDER: Casters

PVC Suction Hose

November 6, 2006 11:11 am | Newage Industries, Inc. | Product Releases | Comments

Kink- and crush-resistant Vardex hose is intended for both pressure and vacuum applications. Made of clear PVC with steel wire reinforcement, it is suitable for either fluid or air transfer.

LISTED UNDER: PVC Tubing | Fittings

Cold Mirrors

November 6, 2006 5:59 am | Deposition Sciences, Inc. | Product Releases | Comments

This breakthrough in cold mirror coating technology withstands light levels above 200 W per square centimeter and extreme temperatures above 400&#176C.

LISTED UNDER: Optics

Stainless Standoffs

November 6, 2006 5:02 am | PennEngineering | Product Releases | Comments

PEM Keyhole self-clinching stainless standoff fasteners allow users to slip printed circuit boards or panels quickly into place in an assembly and then remove them when needed simply by sliding the board sideways and lifting it off. No tools are required for these easy on/off operations.

LISTED UNDER: Fasteners

Flexible Couplings

November 6, 2006 5:02 am | Helical Products Co. | Product Releases | Comments

A range of miniature couplings are offered as small as 1/4 in. diameter to suit shaft sizes down to 3/32 in. The one-piece unit has zero backlash and can transmit rotational torque in angular, parallel, and/or skewed modes.

LISTED UNDER: Couplings

Motion Control Couplings

October 9, 2006 12:09 pm | Lovejoy, Inc. | Product Releases | Comments

Behind the scenes, the equipment that makes possible thousands of tests results for clinical trials, dispenses tens of thousands of exact liquid doses in individual containers, and moves the machines that test and review our bodies requires motion control precision with zero backlash.

LISTED UNDER: Couplings

Workbench

August 8, 2006 12:50 pm | Lista International Corporation | Product Releases | Comments

Ergonomically designed, the Arlink 7000 versatile workbench system significantly improves productivity and maximizes the use of floor space. It has received Class 10,000 cleanroom compliant certification.

LISTED UNDER: Carts and Workstations | Cleanroom Assembly

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading