Captive Access Panel Screws

December 12, 2013 3:49 pm | by MDT Staff | Product Releases | Comments

PEM CAPS (captive access panel screws) integrate a captive screw in a spring-loaded assembly to provide “all-in-one” hardware solutions to securely attach panels, covers, drawers, racks, or other access points and subsequently enable ready access inside whenever necessary.

LISTED UNDER: Fasteners | Handles and Knobs

Powerful Stainless Steel Flat Air Nozzle Saves Space, Money, Resists Corrosion

November 18, 2013 2:59 pm | by MDT Staff | Product Releases | Comments

EXAIR's new 1" Stainless Steel Flat Super Air Nozzle produces a flat 1" (25mm) wide airstream with a strong blowing force of 9.8 ounces (278g) when mounted 12" (305mm) from the target.


Patented Cable Tie-Hooks Remain Securely Fixed in Place

November 15, 2013 4:46 pm | by MDT Staff | Product Releases | Comments

Patented PEM self-clinching cable tie-hooks remain securely fixed in place where installed to provide permanent attachment points for mounting wires and cables inside electronic chassis or enclosures.

LISTED UNDER: Clamping Devices

Thin Sapphire Waveplates

November 11, 2013 1:05 pm | by MDT Staff | Product Releases | Comments

Custom manufactured low order sapphire waveplates that provide superior wear- and chemical-resistance while changing the polarization state of lasers are available from Meller Optics.


Spring-Energized Seals and Bearings Significantly Lower Cost

October 30, 2013 2:23 pm | by MDT Staff | Product Releases | Comments

The Saint-Gobain Seals Group was recently selected to supply OmniSeal spring-energized seals and Rulon bearings for use in high-performance clinical chemical analyzer systems. Chemical analyzers are used in a variety of professions such as medicine and forensics and in such industries as environmental, pharmaceutical, cosmetics, agricultural, consumer products, and food and beverage.

LISTED UNDER: Gaskets and Seals

Die Spring/Heavy Duty Compression Spring Range

October 22, 2013 3:57 pm | by MDT Staff | Product Releases | Comments

Lee Spring has expanded their HEFTY Die Spring product range to include longer free lengths up to 12”. These round wire springs are ideal for applications beyond those of traditional die springs and are well suited for any high stress, heavy load applications.


Washer Options Include Outside Diameters of up to 12 Inches

October 16, 2013 12:12 pm | by MDT Staff | Boker's, Inc. | Product Releases | Comments

Boker's has announced that its extensive capabilities include extended washer sizes up to 12 inches in diameter. This is part of Boker’s wide offering, which provides washers and spacers to accommodate the largest range of applications across any industry.


Adjustable Hydrodynamic Guide Bushings

October 9, 2013 9:14 pm | by MDT Staff | Product Releases | Comments

Spieth adjustable hydrodynamic guide bushings, made of high-quality bearing bronze, are used for guiding axially or roto-axially moving machine components on round column axles, quills, boring bars, and similar round ways.


Self-clinching Nuts Ideally Suit Restrictive Design Envelopes

October 3, 2013 1:36 pm | by MDT Staff | Product Releases | Comments

PEM Type SMPS self-clinching nuts have introduced ideal fasteners for ultra-thin metal sheet applications where design envelopes may be restrictive and space for attachment hardware may be limited. Installing permanently in steel or aluminum metal sheets...


Quick Install Cam Locks Save Installation Time

September 26, 2013 5:08 pm | by MDT Staff | Product Releases | Comments

Quick install cam locks from Illinois Lock Company install quickly and easily – simply push them into place – and are ideal for use in tight places, since they require no mounting clip or nut. Designing quick install locks into your next product will result in reduced installation time.

LISTED UNDER: Handles and Knobs | Hinges and Latches

Zinc Selenide Plano-Convex Lenses with 8-12µm AR Coating

September 25, 2013 11:19 am | by MDT Staff | Edmund Optics | Product Releases | Comments

Edmund Optics (EO) has announced today that it has doubled it's offering of stock Zinc Selenide Plano-Convex (PCX) Lenses. These lenses are an ideal choice for high power laser applications, thermal imaging, FLIR, and medical systems.


Prisms for Laser Cavities & Other Optical Systems

September 9, 2013 6:34 pm | by MDT Staff | Product Releases | Comments

Precision Glass & Optics (PG&O) has announced a line of Littrow dispersion prisms for laser cavities and other optical systems, such as spectrographs. PG&O offers a wide range of coated and uncoated Littrow prisms featuring 30- 60- and 90-degree angles.


New Shape Memory Alloy Latch Actuator Assembly

August 29, 2013 2:27 pm | by MDT Staff | Product Releases | Comments

Autosplice has introduced an innovative new latching assembly based around an actuator that uses Nitinol (Nickel Titanium) shape memory wire to drive the latching and unlatching functions.

LISTED UNDER: Actuator | Hinges and Latches

Low Cost 10MHz DDS Function Generator with Quasi-Analog Control

August 28, 2013 4:02 pm | by MDT Staff | Saelig Company, Inc. | Product Releases | Comments

Saelig Company has introduced the TG1006 - a DDS-based 1mHz to 10MHz function generator that, unlike other digital generators, can be operated over any frequency range using analog control in addition to numeric or spin-wheel frequency entry.

LISTED UNDER: Generators

Highly Mobile Workstations: Adjustable, Efficient, and Convenient

August 27, 2013 2:33 pm | by MDT Staff | Lista International Corporation | Product Releases | Comments

Lista International Corporation announced the availability of mobile bases for almost all of their workbenches and workstations, including the Arlink and Align brands. This maximizes convenience and allows customers to easily reconfigure their workspace to keep up with changing demands.

LISTED UNDER: Carts and Workstations


You may login with either your assigned username or your e-mail address.
The password field is case sensitive.