Advertisement

Board Stacking Connector Offers Better Signal Integrity

April 7, 2008 10:14 am | Smiths Connectors | Hypertac | Product Releases | Comments

The PC/104+ board stacking connector utilizes the unique Hypertac contact system. The Hypertac contacts improve the performance of the PC/104 platform by providing immunity to shock and vibration fretting and allowing for matched impedance and better signal integrity.

LISTED UNDER: Connectors

Quick Disconnects Connect Without Spray or Leakage

March 11, 2008 10:05 am | Beswick Engineering Co., Inc. | Product Releases | Comments

The dry break quick disconnect connects without any fluid spray or leakage and disconnects with minimal dead volume. The assembly is constructed of stainless steel throughout and weighs only 15 grams.

LISTED UNDER: Connectors

Tubing Connector Prevents Misconnections

March 11, 2008 5:10 am | Product Releases | Comments

The SRC connector provides medical personnel with an alternative&#151a tubing connector that is designed to eliminate potential misconnections that can occur with luer fittings.

LISTED UNDER: Connectors | Fittings
Advertisement

Two-in-One Connector

February 14, 2008 6:43 am | Product Releases | Comments

The ST5 is a combination connector with a two-in-one design for interconnecting with a microSD card standardized by SDA and a GSM11.11 standard compatible plug in SIM card. In addition to its two-in-one combination design, the ST5 connector features a very low profile, with a height of only 2.

LISTED UNDER: Connectors

Plastic Connectors

February 14, 2008 6:43 am | ODU-USA, Inc. | Product Releases | Comments

The modified Medi-Snap plastic connector with a metal housing can be configured with two to 26 contact points. They have been tested to withstand over 2,000 mating cycles. These connectors are 100% touch proof and utilize a unique push-pull locking mechanism to ensure a secure connection.

LISTED UNDER: Connectors

SEI to USB Adapter

January 15, 2008 8:30 am | US Digital | Product Releases | Comments

The SEI-USB is an interface module that connects the company’s SEI compatible devices to a standard USB 1.1/2.0 port.

LISTED UNDER: Connectors | Power Supplies | Wire and Cable

Test Connectors

January 10, 2008 10:59 am | Product Releases | Comments

Capable of sealing down to 0.015 inches OD, the ME001 connector is designed for leak testing infusion set and drug delivery devices. Its compact 0.

LISTED UNDER: Connectors | Microbiology/Chemical Testing | Leak Testing

Headers

December 10, 2007 9:56 am | Product Releases | Comments

The Mini-Fit RTC (RoHS temperature capable) headers provide a cost-effective solution for mid-range power applications that require high-density and current-carrying capability.

LISTED UNDER: Connectors
Advertisement

Connection Fittings

November 13, 2007 6:38 am | Product Releases | Comments

Over-tightening fittings results in poor fluid connections and leaky processing. Click-N-Seal connection fittings eliminate this process variable by providing objective feedback that the required torque for a proper seal has been achieved, thereby preventing excess torque.

LISTED UNDER: Connectors | Fittings

Medical Interconnects

November 5, 2007 9:11 am | Product Releases | Comments

Custom RF medical interconnects are engineered to customer requirements for solving problems relative to broadband RF frequency performance, power levels, magnetic shielding, materials, size, and connectivity.

LISTED UNDER: Connectors | Cable Assemblies

Socket Interconnects

November 5, 2007 9:09 am | Product Releases | Comments

These versatile socket interconnects are for 0.025 pin diameter and 0.025 square pins in both single and double rows. The receptacles are precision-machined from brass alloy and assembled with our #16 contact&#151six-finger contact clips designed to accept mated pin ranges from 0.022 to 0.

LISTED UNDER: Connectors

Latching Connectors (4477)

November 5, 2007 9:09 am | Omnetics Connector Corp. | Product Releases | Comments

These circular connectors are available heavily keyed and with mechanical latches, enabling them to withstand pulling forces of up to 5 lbs in a straight line. No special tools are required for mating and unmating, and the design of the connectors further ensures no mis-mating.

LISTED UNDER: Connectors

SMT Connectors

October 11, 2007 9:43 am | Product Releases | Comments

To meet the growing market demand of smaller electronic devices, the SlimStack product line now includes J-Lead SMT connectors. These board-to-board connectors feature a “J”-shaped SMT tail that provides 35% PCB width space savings versus standard gull-wing style tails.

LISTED UNDER: Connectors

Custom Electrical Terminals

October 11, 2007 9:43 am | Product Releases | Comments

Custom electrical terminals for overmolded medical devices are manufactured to specification for integration with discrete component overmolding and are supplied on reels or loose for use with various automation systems. Produced in sizes from 0.008 to 0.09 in. thick with &#1770.002 in.

LISTED UNDER: Connectors

PTFE Terminals

October 9, 2007 11:24 am | Keystone Electronics Corp. | Product Releases | Comments

Engineered for high density packaging on 0.062 and 0.093(TH) PC boards, these PTFE terminals provide outstanding electrical, mechanical, thermal, and chemical characteristics. Rugged and resistant to mechanical shock and vibration, they operate within the temperature range of -85&#176F to 400&#176F.

LISTED UNDER: Connectors

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading