Advertisement
Materials

Wafer Processing Adhesive

March 20, 2015 9:39 am | by AI Technology, Inc. (AIT) | Product Releases | Comments

Temporary wafer bonding for thin wafer processing is one of the key technologies for wafer level 3D system integration. AI Technology, Inc (AIT) is proud to be the first known provider of a film format high temperature temporary bonding adhesive for thin wafer processing of bonding device...

LISTED UNDER: Films | Liners | Pressure Sensitive

Non-Flammable Molding Compound

March 18, 2015 9:03 pm | by Mitsubishi Gas Chemical America Inc. | Product Releases | Comments

Mitsubishi Gas Chemical America’s Vyloglass a new type of thermosetting dry-type polyester molding compound that is non-flammable and resistant to electric spark; providing a high safety level reaching UL-94 class V-0 flame retardance rating. Nonflammable – Does not burn in spite of being...

LISTED UNDER: Molding

Stock Components Catalog

March 18, 2015 12:40 pm | by Qosina | Qosina | Product Releases | Comments

The New 2015 Qosina Catalog offers easy browsing of thousands of stock components on a one-centimeter grid. Qosina has the largest selection of parts for the medical OEM, kit packer and pharmaceutical industries, offering free samples, low minimums, and Just-in-Time (JIT) delivery...

LISTED UNDER: Stock Shapes
Advertisement

Ultra-High K Dielectrics

March 17, 2015 12:35 pm | by Knowles | Product Releases | Comments

The DLI brand of Knowles Capacitors will be launching an increased range to their ‘UX’ Ultra-High K Dielectric at the MTTS show on Booth 129. ‘UX’ material has the highest dielectric constant of any of DLI’s wide variety of materials and allows for higher capacitance values...

LISTED UNDER: Alloys

HIGH TENSION STAINLESS STEEL STRANDS AND CABLES

March 11, 2015 6:15 pm | ASAHI INTECC USA, INC. | Products

Asahi Intecc offers responsive high-tension angulation wires to medical device and endoscope product designers and high-volume manufacturing programs, increasing your fatigue and breakload strength to comparable cables with identical material, configuration, and diameter by 10 to 20%. These high-tension angulation wires may be coated with durable, abrasion-resistant ptfe and nylon coatings, depending on the application. Additional advantages include a clean material surface finish on the stainless cable which is extremely easy to solder; swaging, coating, and masking for your specific durability, and custom stainless cable assembly.

LISTED UNDER: Design Services | Product Design | Abrasion resistant

MULTI-LAYER TUBE - POLYMER AND BRAID-POLYMER

March 11, 2015 5:22 pm | ASAHI INTECC USA, INC. | Products

MULTI-LAYER TUBING - POLYMER For customers who need visualization under X-Rays, such as angiographic catheters, Asahi Intecc may provide tubing with bismuth or barium stripes as a radiopaque, chemically resistant resin in a multi-layer tube. Multi-Layer Tubing – Polymer and Braided Reinforcement (Nylon, Tungsten, Stainless) Nylon, tungsten, or stainless braid can be braided over a lubricious, low-friction, drug resistant PTFE liner with a silver mandrel to provide torque response, kink and fluid pressure resistance (saline, blood, drug, chemical, nutrient). Pitch and pick count may be adjusted on the braid for customized flexibility, kink-resistance, and torque properties.

LISTED UNDER: IVD Contract Manufacturing | Product Design | Liners

VARIABLE FLEXIBILITY POLYMER TUBING

March 11, 2015 3:56 pm | ASAHI INTECC USA, INC. | Products

This tubing may be used where a proximal push and rotation along with a delicately flexible distal tip is desirable to access the treatment area. Offered on our catheters and as part of our OEM/ODM and assembly services, the multi-segmented flexibility is seamless without manually connecting joints between the two or more selected materials and durometers for the catheter shaft.

LISTED UNDER: Full Service Contract Manufacturing | Product Design | Product R&D

PTFE OVER THE MANDREL (THIN WALL PTFE)

March 11, 2015 3:47 pm | ASAHI INTECC USA, INC. | Products

For device manufacturers who wish to prototype with Asahi Intecc, or contract manufacturers who are considering outsourcing their entire device, we provide ultra-thin PTFE to the inside of braided shafts or torque components. Provided on a spool, PTFE is coated on the mandrel by a dipping process. The mandrel size ranges from 0.45mm to 2.30mm. The PTFE wall thickness (one side can range from 0.008mm to 0.012mm (0.00031” to 0.00047” or 8 to 12 microns)). The PTFE is chemically etched on catheter delivery systems, microcatheters, and other delivery systems, where an instrument or a guidewire passes through a PTFE coated lumen.

LISTED UNDER: IVD Contract Manufacturing | Product R&D | Abrasion resistant
Advertisement

Compounding Service - Polymer Blending

March 11, 2015 3:41 pm | ASAHI INTECC USA, INC. | Products

Asahi Intecc offers to medical tubing manufacturers and polymer processors a compounding service in materials of FEP, PTFE, PFA, PE (HDPE, LDPE), NYLON, (Grilamid, Polyamide, Polyamide Elastomer, PEBAX) TPU, PP, in small, affordable quantities and short lead-times. Small lots (5kg) with excellent consistency and dispersion may be blended or pelletized in a wide range of colors. Contrast media options include bismuth trioxide Bi2O3, barium sulfate (BaSO4), bismuth subcarbonate (BiO)₂CO₃are available for applications which are viewed under fluoroscopy.

LISTED UNDER: Extrusion | Plastics | Additives/Blends

Polyimide-Filled Polytetrafluoroethylene Compound

February 19, 2015 1:41 pm | by Bal Seal Engineering, Inc. | Bal Seal Engineering, Inc. | Product Releases | Comments

Bal Seal Engineering, Inc. has expanded its line of seal materials to include SP191, a polyimide-filled polytetrafluoroethylene compound. The company says the properties of the new material make it ideal for use in gas compressors, oxygen intensifier systems, and other medical equipment requiring low...

LISTED UNDER: Polyethylenes

Silicone Products

February 13, 2015 10:59 am | by Shin-Etsu Silicones of America | Product Releases | Comments

Shin-Etsu Chemical Co. Ltd. is the largest chemical company in Japan, and is in its 62nd year of manufacturing silicone materials worldwide, producing over 4,000 different silicone products. The KEG2003H Low Dn LIMS product line has been formulated and precisely manufactured to significantly reduce...

LISTED UNDER: Silicone

Rigid PVC Compound

February 6, 2015 10:22 am | by Teknor Apex Company | Product Releases | Comments

A breakthrough in PVC technology now makes it possible for rigid PVC to replace polycarbonate (PC) in clear medical components such as connectors and check valves, obtaining comparable strength and excellentclarity while reducing or eliminating the stress cracking that often occurs in PC at the interface with flexible PVC components...

LISTED UNDER: PVC

Custom Clad Metal Wire

February 3, 2015 7:04 pm | by Anomet Products, Inc. | Product Releases | Comments

Custom manufactured clad metal wire that can combine properties such as high strength and conductivity, radiopacity, and biocompatibility to improve design flexibility is available from Anomet Products of Shrewsbury, MA. Anomet Medical Clad Metal Wire can be formulated to achieve...

LISTED UNDER: Other | Precious Metals

Pump Components

January 29, 2015 1:38 pm | by Morgan Advanced Materials Seals and Bearings | Product Releases | Comments

Morgan Advanced Materials’ Seals and Bearings business highlights their pump components applicable to variety of applications and industries. Morgan offers a selection of high performance axial and radial bearings, seal face components, rotors and vanes, in a range of sizes and compositions. The pump components are manufactured from specialized formulations of carbon/graphite and silicon...

LISTED UNDER: Chemically Inert | Silicone

Bioresorbable Elastomer

January 26, 2015 12:17 pm | by Secant Medical, Inc. | Secant Medical, Inc. | Product Releases | Comments

Regenerez is a next-generation bioresorbable elastomer made with poly(glycerol sebacate) (PGS) in a coating formulation provides considerable benefits to biomedical structures. Coating a partially or fully resorbable structure with PGS can improve coating biocompatibility by promoting tissue in-growth, enabling controlled drug release, and solving compliance mismatch issues with bodily tissue...

LISTED UNDER: Biocompatible | Plastics & Elastomers

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading