Metals
From Almost Invisible to 1.0mm Thick Foils for Research Applications
April 30, 2013 5:23 pm | by MDT Staff | Goodfellow Corporation | Product Releases | CommentsFoils as thin as 0.00025mm are among the many foils available from Goodfellow for research and product development. More than 50 pure metals and approximately 100 alloys are represented in the company’s full line of foils, with some of them – rolled or deposited in Goodfellow’s own production department – not available from any other supplier.
LISTED UNDER: Foils | Metals | Alloys
Engineered Metal Solutions to Showcase at MD&M East Exposition
April 30, 2013 4:56 pm | by MDT Staff | Product Releases | CommentsATW Companies will be highlighting its leadership in engineered metal solutions for medical devices at the MD&M East Exposition, Booth #3434 from June 18-20, 2013 at the Pennsylvania Convention Center in Philadelphia, Pennsylvania.
LISTED UNDER: Metals
Metal Film Leaded Resistors
May 16, 2012 7:37 am | Stackpole Electronics, Inc. | Product Releases | CommentsStackpole has expanded their popular RNF Series of metal film axial leaded resistors and is now able to support tolerances as tight as ±0.05% and TCR values as low as 10 ppm.
LISTED UNDER: Resistors | Metals | Films
Composite Clad Metal Wire
May 14, 2012 6:00 am | Anomet Products, Inc. | Product Releases | CommentsCustom manufactured precious metal clad wire that can be formulated to meet specific OEM performance characteristics such as temperature and corrosion resistance or biocompatibility...
LISTED UNDER: Composites | Metals | Composites
Engineered Metal Solutions
May 3, 2012 8:10 am | Product Releases | CommentsATW Companies Inc., a leading provider of custom manufactured metal components and services, will be showcasing its “ATW Medical” brand and highlighting its leadership in engineered metal solutions...
LISTED UNDER: Metals | Injection Molding | Metal Injection Molding
Photo Etching Metals with Spring Characteristics
March 1, 2012 5:47 am | Tech-Etch, Inc. | Product Releases | CommentsTech-Etch specializes in the etching, forming, heat treating, and finishing of components made from metals with superior spring characteristics. Prototypes are delivered in five days.
LISTED UNDER: Photo Etching | Springs | Metals
Sheet Metal Finishing Hole Plugs
February 23, 2012 5:39 am | Mocap Inc. | Product Releases | CommentsMOCAP’s LDPE snap-in sheet metal finishing hole plugs provide an attractive finish and a secure fit. These items are used to plug holes on appliances, automobiles, tanks, cabinets...
LISTED UNDER: Caps and Plugs | Plugs and Receptacles | Metals
Engineered Metal Solutions
February 8, 2012 10:24 am | Product Releases | CommentsATW Companies Inc., a leading provider of custom manufactured metal components and services, will be showcasing its “ATW Medical” brand and highlighting its leadership...
LISTED UNDER: Metals | CNC Machining | Injection Molding
Family of 16 mm Metal Gear Motors
December 5, 2011 5:43 am | Product Releases | CommentsNidec Copal (U.S.A.) Corporation of Torrance, CA has expanded their 0.630” (16 mm) OD brush and brushless DC gear motor product lines with the next generation MG16B...
LISTED UNDER: Gear Motors | Gear Motors | Gears and Gearing
Metal Injection Molding
November 16, 2011 5:57 am | Product Releases | CommentsParmatech Corporation, a leading provider of custom manufactured metal injection molding (MIM) components and services, announces that it will feature a range of its capabilities...
LISTED UNDER: Molding | Molding Equipment | Molding Systems
Metal Injection Molding and Micro-MIM
October 27, 2011 10:53 am | Product Releases | CommentsAdvanced Powder Products, Inc. uses metal injection molding (MIM) and micro-MIM (µMIM) to produce precision parts for surgical, dental and implantation applications in a range of alloys...
LISTED UNDER: Molding | Molding Equipment | Molding Systems
Clad Metal Wire Enhances Medical Design Options
October 6, 2011 6:13 am | Anomet Products, Inc. | Product Releases | CommentsCustom manufactured clad composite wire that lets medical device makers innovate more effectively by combining several properties into a single wire is available from Anomet Products, Inc.
LISTED UNDER: Metals | Nitinol
Mounted Points for Robotic Metal Finishing
September 21, 2011 6:58 am | Rex-Cut Products, Inc. | Product Releases | CommentsA full line of cotton fiber mounted points that are ideally suited for EOAT (end-of-arm-tooling) in automated metal deburring and finishing applications is available from Rex-Cut Products, Inc.
LISTED UNDER: Metals
Metal Detectable Thermoplastic
September 8, 2011 6:13 am | Ensinger | Product Releases | CommentsTECAPEEK ID from Ensinger Inc. is made from FDA, USDA, and 3A Dairy compliant components and a special additive to form a thermoplastic that is visible to standard metal detection systems.
LISTED UNDER: Metals | Plastics
Rugged Metal Electro-Optic Sensor
August 22, 2011 5:49 am | Gems Sensors Inc. & Controls | Product Releases | CommentsGems Sensors & Controls (Gems), a global leader in liquid level, pressure, and flow sensors, miniature solenoid valves, and fluidic systems, introduces the new low cost, miniature ELS-950M...
LISTED UNDER: Optics | Metals | Sensors
