Advertisement
Metals

Patented Alloy Provides Breakthrough Parts Characteristics and One-Step Parts Processing

June 11, 2013 5:21 pm | by MDT Staff | Product Releases | Comments

Based on a scientific breakthrough developed at Caltech, the Department of Defense, and NASA, Liquidmetal Technologies has introduced an amorphous metal alloy that can be used in the production of highly complex parts via an efficient injection-molding process.

LISTED UNDER: Molding | Metals
Advertisement

Composite Clad Metal Wire Replaces Pure Platinum, Gold, Silver

June 5, 2013 5:25 pm | by MDT Staff | Anomet Products, Inc. | Product Releases | Comments

Composite clad metal wire that can be formulated to improve the performance characteristics of precious metal solid wire at a small fraction the cost is available from Anomet Products. Anomet Precious Metal Clad Wire can be formulated to accentuate specific performance characteristics such as strength, radiopacity and corrosion-, contact-, or temperature-resistance. 

LISTED UNDER: Metals

From Almost Invisible to 1.0mm Thick Foils for Research Applications

April 30, 2013 5:23 pm | by MDT Staff | Goodfellow Corporation | Product Releases | Comments

Foils as thin as 0.00025mm are among the many foils available from Goodfellow for research and product development. More than 50 pure metals and approximately 100 alloys are represented in the company’s full line of foils, with some of them – rolled or deposited in Goodfellow’s own production department – not available from any other supplier.

LISTED UNDER: Foils | Metals | Alloys

Engineered Metal Solutions to Showcase at MD&M East Exposition

April 30, 2013 4:56 pm | by MDT Staff | Product Releases | Comments

ATW Companies will be highlighting its leadership in engineered metal solutions for medical devices at the MD&M East Exposition, Booth #3434 from June 18-20, 2013 at the Pennsylvania Convention Center in Philadelphia, Pennsylvania.

LISTED UNDER: Metals

NeoTorque

November 21, 2012 11:16 am | NeoMetrics, Inc. | Products

NeoTorque™ Straightening Based on our proprietary NeoTorque process technology, NeoMetrics is proud to offer excellent torque response in its families of nitinol and Triton™ alloy guidewires. If the core wire hasn’t been straightened before grinding, processing and assembly, it won’t be torqueable! -Torque response for maximum clinical performance

LISTED UNDER: Wire Forming | Metals | Material Testing

ZTG (Zero Transition Guidewire)

November 21, 2012 11:08 am | NeoMetrics, Inc. | Products

ZTG™ (Zero Transition Guidewire) is a Seamless and atraumatic core to coil transition. NeoMetrics developed the ZTG guidewire technology to achieve an atraumatic core-to-coil transition. This seamless transition aids in catheter advancement over the wire and also minimizes any vascular trauma – especially useful in clinical situations where certain vessels are prone to vasospasm. -The seamless transition of the ZTG guidewire offers a significant clinical benefit Proprietary patented technology and strategic advantage

LISTED UNDER: Design Services | Prototyping | Metals

Triton Alloy

November 21, 2012 11:03 am | NeoMetrics, Inc. | Products

The Triton alloy is a new proprietary (patent pending) alloy developed by NeoMetrics. The Triton alloy is a “next generation” form of nitinol and retains the superelastic properties of nitinol but has a 40% higher bending modulus than nitinol. According to bench testing, when compared to traditional nitinol this should result in: - Superior support profile for delivering interventional devices - Better column strength for excellent pushability to reach target treatment areas - Superior torqueability for steerability in challenging cases

LISTED UNDER: Full Service Contract Manufacturing | Product R&D | Metals

Metal Film Leaded Resistors

May 16, 2012 7:37 am | Stackpole Electronics, Inc. | Product Releases | Comments

Stackpole has expanded their popular RNF Series of metal film axial leaded resistors and is now able to support tolerances as tight as ±0.05% and TCR values as low as 10 ppm.

LISTED UNDER: Resistors | Metals | Films

Composite Clad Metal Wire

May 14, 2012 6:00 am | Anomet Products, Inc. | Product Releases | Comments

Custom manufactured precious metal clad wire that can be formulated to meet specific OEM performance characteristics such as temperature and corrosion resistance or biocompatibility...

LISTED UNDER: Composites | Metals | Composites

Engineered Metal Solutions

May 3, 2012 8:10 am | Product Releases | Comments

ATW Companies Inc., a leading provider of custom manufactured metal components and services, will be showcasing its “ATW Medical” brand and highlighting its leadership in engineered metal solutions...

LISTED UNDER: Metals | Injection Molding | Metal Injection Molding

Photo Etching Metals with Spring Characteristics

March 1, 2012 5:47 am | Tech-Etch, Inc. | Product Releases | Comments

Tech-Etch specializes in the etching, forming, heat treating, and finishing of components made from metals with superior spring characteristics. Prototypes are delivered in five days.

LISTED UNDER: Photo Etching | Springs | Metals

Sheet Metal Finishing Hole Plugs

February 23, 2012 5:39 am | Mocap Inc. | Product Releases | Comments

MOCAP’s LDPE snap-in sheet metal finishing hole plugs provide an attractive finish and a secure fit. These items are used to plug holes on appliances, automobiles, tanks, cabinets...

LISTED UNDER: Caps and Plugs | Plugs and Receptacles | Metals

Engineered Metal Solutions

February 8, 2012 10:24 am | Product Releases | Comments

ATW Companies Inc., a leading provider of custom manufactured metal components and services, will be showcasing its “ATW Medical” brand and highlighting its leadership...

LISTED UNDER: Metals | CNC Machining | Injection Molding

Family of 16 mm Metal Gear Motors

December 5, 2011 5:43 am | Product Releases | Comments

Nidec Copal (U.S.A.) Corporation of Torrance, CA has expanded their 0.630” (16 mm) OD brush and brushless DC gear motor product lines with the next generation MG16B...

LISTED UNDER: Gear Motors | Gear Motors | Gears and Gearing

Metal Injection Molding

November 16, 2011 5:57 am | Product Releases | Comments

Parmatech Corporation, a leading provider of custom manufactured metal injection molding (MIM) components and services, announces that it will feature a range of its capabilities...

LISTED UNDER: Molding | Molding Equipment | Molding Systems

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading