Advertisement
Adhesives

Hot Melt Equipment

December 10, 2014 9:32 am | Glue Machinery Corporation | Products

At Glue Machinery Corporation™, we offer an extensive line of hot melt glue systems and components for all types of manufacturing applications. Used by manufacturing companies across the world, our high-performance hot melt equipment helps manufacturers improve precision, increase production speed and efficiency, and decrease costs.

LISTED UNDER: Hot-Melt

Medium Viscosity, UV/Visible Light Curing Cyanoacrylate Adhesive

October 24, 2014 12:02 pm | by MDT Staff | Ellsworth Adhesives | Product Releases | Comments

Presented by Ellsworth Adhesives, Henkel Loctite 4311™ Flashcure® is a light yellow-green, medium viscosity, UV/visible light curing cyanoacrylate adhesive designed for bonding applications that require very rapid fixturing, fillet cure or surface cure. Its UV/light cure properties assist in rapid curing of exposed surface areas, minimizing blooming and providing an alternative to using...

LISTED UNDER: Cyanoacrylate | UV-or Light-Cure

New Environmentally-Friendly Polyurethane Potting Compound

October 15, 2014 8:30 am | by MDT Staff | Product Releases | Comments

Epoxies has released a new plant-based potting, casting and encapsulating compound for electronic applications with low toxicity requirements. Called 20-2121 Polyurethane, this environmentally-friendly alternative to conventional potting compounds is made from natural...

LISTED UNDER: Urethane
Advertisement

LED-Curable Catheter Adhesive

October 13, 2014 8:30 am | by MDT Staff | Product Releases | Comments

Dymax Corporation has introduced MD 215-CTH-UR-SC, an LED-curable adhesive designed for bonding and assembly of next-generation catheter designs using Nylon 12 and PEBA. Formulated with new Encompass technology that combines Dymax exclusive...

LISTED UNDER: UV-or Light-Cure

Thermally Conductive, Two Component Epoxy

September 24, 2014 8:30 am | by MDT Staff | Master Bond, Inc. | Product Releases | Comments

With biocompatibility and cytotoxicity certifications, Master Bond EP21AOLV-2Med is often selected for bonding, sealing, coating and encapsulation applications in the medical device industry. This two component...

LISTED UNDER: Epoxy

Low Viscosity, One Part Cyanoacrylate

August 27, 2014 8:30 am | by MDT Staff | Master Bond, Inc. | Product Releases | Comments

Master Bond MB250NT is widely used for a variety of applications ranging from repair to high speed production for disposable/reusable medical devices...

LISTED UNDER: Cyanoacrylate

Highly Conformable TIM

August 15, 2014 2:33 pm | by MDT Staff | Product Releases | Comments

Fujipoly announced the expansion of its Sarcon XR-Pe product offering with the availability of a 1.0 mm thick sheet. Sarcon XR-Pe delivers a remarkable thermal conductivity of 11 W/m°K (ASTM D 5470) with a thermal resistance as low as .06°Cin2/W...

LISTED UNDER: Heat Exchangers | Conductive

One Component, Snap Cure Epoxy Features High Strength Properties

August 6, 2014 3:15 pm | by MDT Staff | Master Bond, Inc. | Product Releases | Comments

Suitable for a variety of applications in the electronic, aerospace and OEM industries, Master Bond EP3SP5FL is a single component epoxy that cures in 1-2 minutes at 300°F...

LISTED UNDER: Epoxy
Advertisement

Low Viscosity, Two-Component Epoxy

July 9, 2014 9:32 pm | by MDT Staff | Master Bond, Inc. | Product Releases | Comments

Master Bond EP112LS is a two-part epoxy that is well suited for impregnation, potting, encapsulation, sealing and coating applications, particularly in the aerospace and optoelectronics industries. EP112LS is optically clear, features reliable non-yellowing propertie...

LISTED UNDER: Epoxy

Innovative, Light-Curable Adhesives

June 10, 2014 11:54 pm | by MDT Staff | Product Releases | Comments

Dymax will exhibit in Booth #1557 at MD&M East, scheduled to take place June 10-12, 2014 at the Jacob Javits Center in New York. With over 30 years of direct participation...

LISTED UNDER: UV-or Light-Cure

Low Trauma Tapes

May 29, 2014 8:00 am | by MDT Staff | Product Releases | Comments

Lohmann Precision Die Cutting (previously G&L Precision Die Cutting) and Lohmann Technologies will be exhibiting in booth 869 featuring new low trauma pressure sensitive adhesive tapes for advanced wound care, chronic wound care...

LISTED UNDER: Pressure-Sensitive Components | Tapes

Low-Trauma Adhesive

May 22, 2014 8:00 am | by MDT Staff | Product Releases | Comments

Medical device companies DermaMed Coatings Company, LLC and EuroMed, Inc. joined together to develop and introduce a proprietary, cost efficient, hydrocolloid fixation technology. Co-branded under the name HydroSoft, this low-trauma adhesive...

LISTED UNDER: Hydrocolloid/Hydrogel

Die-Attach Film Adhesive

May 14, 2014 8:00 am | by MDT Staff | Product Releases | Comments

AI Technology, Inc. (AIT) has solved one of the technically more challenging problems in wafer level semiconductor packaging to achieve conductive die-attach film adhesive (DAF) of 20 micron thickness. While die-attach film adhesive (DAF)...

LISTED UNDER: Conductive

UV Curable System

April 30, 2014 8:10 am | by MDT Staff | Master Bond, Inc. | Product Releases | Comments

Specially formulated to optimize bond strength, Master Bond, Inc.'s UV15-42C is a UV curable system for bonding, sealing and coating applications. This smooth paste can be applied vertically without sagging. As an optically clear compound...

LISTED UNDER: UV-or Light-Cure

Two Component Epoxy System

April 15, 2014 8:00 am | by MDT Staff | Master Bond, Inc. | Product Releases | Comments

Master Bond EP30-3LO is a two component epoxy system offering optical clarity, high temperature resistance, and NASA low outgassing approval. This combination of properties enables it to be suitable for bonding, sealing, coating...

LISTED UNDER: Epoxy

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading