Advertisement

Soft Light-Curable Adhesive

March 19, 2014 8:41 pm | by MDT Staff | Product Releases | Comments

Cyclic olefin polymers/copolymers have become popular choices in the point-of-care device industry because of their many advantages including high strength, hardness, low water absorption, and excellent biocompatibility...

LISTED UNDER: UV-or Light-Cure | Cyclic Olefin Copolymer (COC) | Cyclo-olefin Polymer

Antimicrobial Acrylic-based Multipolymer Compound

February 27, 2014 4:42 pm | by MDT Staff | Evonik Cyro, LLC | Product Releases | Comments

Evonik Cyro has introduced the CYROLITE Protect 2, an acrylic-based multipolymer compound developed for medical devices with antimicrobial agents. CYROLITE Protect 2 offers lipid and alcohol resistance...

LISTED UNDER: Acrylic | Antimicrobial | Polymers

Rigid, Abrasion Resistant Two Component Epoxy

February 20, 2014 5:13 pm | by MDT Staff | Master Bond, Inc. | Product Releases | Comments

Engineered with a silicon carbide filler material, Master Bond EP21SC-1 delivers abrasion resistance for an array of chemical and mechanical processing applications. This epoxy has a smooth paste consistency and a non-critical one to one mix ratio by weight or volume...

LISTED UNDER: Epoxy
Advertisement

EMI Shielding Material for Precision Die-Cuts

February 12, 2014 4:39 pm | by MDT Staff | Product Releases | Comments

Many electronic enclosures have gaps that allow unwanted RF and electromagnetic interference to escape into the surrounding environment. These openings are commonly found around the I/O panel, backplane and access panels of the enclosure...

LISTED UNDER: Conductive | Foam | Other

Protecting Skin with Gentle Adhesives Requires an Experienced Medical Converter

February 4, 2014 5:30 pm | by MDT Staff | Fabrico, Inc. | Product Releases | Comments

Fabrico Medical now offers low trauma silicone adhesives from 3M for gentle skin interface. Low trauma soft silicones from 3M provide good adhesion to a variety of skin types, including the fragile skin conditions of the very old and very young.

LISTED UNDER: Silicone

Non-Drip, One Component Silicone Offers High Temperature Resistance

January 27, 2014 3:55 pm | by MDT Staff | Master Bond, Inc. | Product Releases | Comments

Placing an emphasis on convenient handling, Master Bond MasterSil 705TC features a paste consistency that doesn’t require mixing. This single component system sets up in 7 minutes and has a non-corrosive cure at room temperature when exposed to atmospheric humidity.

LISTED UNDER: Silicone

Catheter Adhesive Provides Easy Cure Confirmation and Post-Cure Inspection

January 27, 2014 3:06 pm | by MDT Staff | Product Releases | Comments

212-CTH-UR-SC is the latest in a series of Dymax adhesives to be formulated with both Ultra-Red and patented See-Cure technologies. It’s designed for use in catheter assembly and offers excellent bond strength to a variety of substrates including platinum and polycarbonate...

LISTED UNDER: UV-or Light-Cure

Dimensionally Stable Two Component Urethane Modified Epoxy Gel

January 13, 2014 12:22 pm | by MDT Staff | Master Bond, Inc. | Product Releases | Comments

Primarily used for potting and encapsulation applications, Master Bond Super Gel 9AO is a  soft, urethane modified gel-like epoxy that offers thermal conductivity and electrical insulation properties. This two part system is also employed for bonding and sealing as it adheres well to a variety of substrates including metals, glass, ceramics and many rubbers and plastics.

LISTED UNDER: Epoxy | Urethane
Advertisement

Thermally Conductive, Electrically Insulative One Part Epoxy

December 13, 2013 2:58 pm | by MDT Staff | Master Bond, Inc. | Product Releases | Comments

Featuring the combination of electrical insulation properties and thermal conductivity, Master Bond Supreme 3HTND-2GT can be used for a variety of applications including bonding, sealing, glob top and die attach. This toughened epoxy system bonds well to a wide variety of substrates used in electronics...

LISTED UNDER: Epoxy

New Needle-Bonding Adhesives Cure Fast for Increased Throughput

June 10, 2013 5:16 pm | by MDT Staff | Product Releases | Comments

A new family of LED-curable needle-bonding adhesives from Dymax has been formulated to cure at speeds typically associated with today’s best automation equipment and line speeds. Typical cure time for the 1400 series is 2.5 seconds or less, allowing for increased production speed and throughput, lower processing costs...

LISTED UNDER: UV-or Light-Cure

Structural Adhesives as Alternative to Mechanical Fasteners

March 1, 2013 10:07 am | by MDT Staff | Fabrico, Inc. | Product Releases | Comments

Fabrico, the leader in design and manufacturing services for flexible materials and advanced assembly solutions, offers structural adhesives in both liquid and tape format to meet the evolving assembly needs of industries including medical.

LISTED UNDER: Conductive | Epoxy | Tapes

Light-Curable Needle-Bonding Adhesive Eliminates Secondary Processing

February 26, 2013 10:44 am | by MDT Staff | Product Releases | Comments

Dymax Corporation’s MD 1193-M-SV05, a new, multipurpose medical-device adhesive, cures tack free quickly upon exposure to UV and/or visible light, eliminating the need for heat or secondary moisture cure on high-speed assembly lines.

LISTED UNDER: UV-or Light-Cure

Fiber Optic Adhesives Formulated for Better Polishing

December 5, 2012 9:28 am | by MDT Staff | Product Releases | Comments

A new line of fiber optic adhesives that are formulated to produce a hard, smooth, and clean surface which can be highly polished for superior attenuation is being introduced by Mereco Technologies.

LISTED UNDER: Epoxy

Website Helps Visitors Discover LED Light-Curing Technology

October 23, 2012 2:40 pm | Product Releases | Comments

Dymax Corporation has launched a new website that outlines the benefits of LED light-curing technology. Site visitors will find detailed product information for a variety of Dymax LED-curable materials...

LISTED UNDER: Adhesive-Curing Systems | UV-or Light-Cure

EP42HT-2Med

September 6, 2012 1:17 pm | Master Bond, Inc. | Products

Master Bond EP42HT-2Med is a room temperature curable two component epoxy, adhesive, sealant, coating and casting material featuring high temperature resistance along with outstanding chemical resistance. It is widely used in the assembly of medical devices due to its capability of withstanding repeated sterilizations and its compliance with the testing requirements of USP Class VI plastics. EP42HT-2Med can also be used for potting and encapsulating up to 2-3 inches thick. It has excellent electrical insulation properties and is serviceable from -60°F up to 450°F. EP42HT-2Med is widely used in the medical industry for manufacturing and repairing endoscopes, surgical instruments, catheters and many other medical devices. Additionally, EP42HT-2Med is available in black as a USP Class VI system.

LISTED UNDER: Class VI-Compliant | Epoxy

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading