Dimensionally Stable Two Component Urethane Modified Epoxy Gel

January 13, 2014 12:22 pm | by MDT Staff | Master Bond, Inc. | Product Releases | Comments

Primarily used for potting and encapsulation applications, Master Bond Super Gel 9AO is a  soft, urethane modified gel-like epoxy that offers thermal conductivity and electrical insulation properties. This two part system is also employed for bonding and sealing as it adheres well to a variety of substrates including metals, glass, ceramics and many rubbers and plastics.

LISTED UNDER: Epoxy | Urethane

Thermally Conductive, Electrically Insulative One Part Epoxy

December 13, 2013 2:58 pm | by MDT Staff | Master Bond, Inc. | Product Releases | Comments

Featuring the combination of electrical insulation properties and thermal conductivity, Master Bond Supreme 3HTND-2GT can be used for a variety of applications including bonding, sealing, glob top and die attach. This toughened epoxy system bonds well to a wide variety of substrates used in electronics...


New Needle-Bonding Adhesives Cure Fast for Increased Throughput

June 10, 2013 5:16 pm | by MDT Staff | Dymax Corporation | Product Releases | Comments

A new family of LED-curable needle-bonding adhesives from Dymax has been formulated to cure at speeds typically associated with today’s best automation equipment and line speeds. Typical cure time for the 1400 series is 2.5 seconds or less, allowing for increased production speed and throughput, lower processing costs...

LISTED UNDER: UV-or Light-Cure

Structural Adhesives as Alternative to Mechanical Fasteners

March 1, 2013 10:07 am | by MDT Staff | Fabrico, Inc. | Product Releases | Comments

Fabrico, the leader in design and manufacturing services for flexible materials and advanced assembly solutions, offers structural adhesives in both liquid and tape format to meet the evolving assembly needs of industries including medical.

LISTED UNDER: Conductive | Epoxy | Tapes

Light-Curable Needle-Bonding Adhesive Eliminates Secondary Processing

February 26, 2013 10:44 am | by MDT Staff | Dymax Corporation | Product Releases | Comments

Dymax Corporation’s MD 1193-M-SV05, a new, multipurpose medical-device adhesive, cures tack free quickly upon exposure to UV and/or visible light, eliminating the need for heat or secondary moisture cure on high-speed assembly lines.

LISTED UNDER: UV-or Light-Cure

Fiber Optic Adhesives Formulated for Better Polishing

December 5, 2012 9:28 am | by MDT Staff | Product Releases | Comments

A new line of fiber optic adhesives that are formulated to produce a hard, smooth, and clean surface which can be highly polished for superior attenuation is being introduced by Mereco Technologies.


Website Helps Visitors Discover LED Light-Curing Technology

October 23, 2012 2:40 pm | Dymax Corporation | Product Releases | Comments

Dymax Corporation has launched a new website that outlines the benefits of LED light-curing technology. Site visitors will find detailed product information for a variety of Dymax LED-curable materials...

LISTED UNDER: Adhesive-Curing Systems | UV-or Light-Cure


September 6, 2012 1:17 pm | Master Bond, Inc. | Products

Master Bond EP42HT-2Med is a room temperature curable two component epoxy, adhesive, sealant, coating and casting material featuring high temperature resistance along with outstanding chemical resistance. It is widely used in the assembly of medical devices due to its capability of withstanding repeated sterilizations and its compliance with the testing requirements of USP Class VI plastics. EP42HT-2Med can also be used for potting and encapsulating up to 2-3 inches thick. It has excellent electrical insulation properties and is serviceable from -60°F up to 450°F. EP42HT-2Med is widely used in the medical industry for manufacturing and repairing endoscopes, surgical instruments, catheters and many other medical devices. Additionally, EP42HT-2Med is available in black as a USP Class VI system.

LISTED UNDER: Class VI-Compliant | Epoxy


September 6, 2012 1:11 pm | Master Bond, Inc. | Products

Master Bond EP3HTMed fully meets USP Class VI requirements and is formulated to cure at elevated temperatures. It has excellent resistance to radiation, ETO, autoclaving and chemical sterilants. EP3HTMed has a service operating temperature range of –60°F to +400°F, is 100% reactive and does not contain any diluents or solvents. Another benefit of this single component, no mix epoxy adhesive is its unlimited working life.

LISTED UNDER: Class VI-Compliant | Epoxy | UV-or Light-Cure

MasterSil 151MED

September 6, 2012 12:57 pm | Master Bond, Inc. | Products

MasterSil 151Med is an optically clear, flexible, tough, high performance potting and encapsulation compound introduced by Master Bond. It exhibits superior electrical insulation properties and very low shrinkage upon cure. MasterSil 151 MED is resistant to vibration and shock and has a service operating temperature range of –65°F to +400°F. It meets USP Class VI requirements for medical applications.

LISTED UNDER: Class VI-Compliant | Silicone | UV-or Light-Cure


September 6, 2012 10:54 am | Master Bond, Inc. | Products

Fast curing UV18Med is a new single component adhesive/sealant that meets USP Class VI specifications for medical applications. UV18Med offers durable, flexible bonds and superior resistance to water and chemicals. It has a Shore D hardness of 55-60 and an elongation of less than 35%. It adheres well to a wide range of substrates including metals, glass and most plastics. Shrinkage upon cure is substantially less than conventional UV cure systems.

LISTED UNDER: Class VI-Compliant | UV-or Light-Cure


September 6, 2012 10:47 am | Master Bond, Inc. | Products

Master Bond LED403Med requires no mixing and will cure rapidly, with the speed of cure dependent upon the intensity of the light, the thickness of the layer and the distance of the light source from the material being cured. LED403Med can cure in sections up to and beyond 1/8 inch thick upon exposure to the LED light. In thinner sections, full cures can be achieved in 15-30 seconds (sometimes less than that), while thicker sections require longer cure times. Environmentally friendly, this compound is solvent free.

LISTED UNDER: Class VI-Compliant | UV-or Light-Cure

High Strength, One Component Epoxy

August 22, 2012 10:44 am | Master Bond, Inc. | Product Releases | Comments

Master Bond Supreme 10HT is a uniquely versatile system that combines high shear and peel strengths with convenient handling. This one part system eliminates mixing and cures in just 60-75 minutes at 250°F.


Fabrico’s Proprietary Process Delivers Clear Printing on Tape

July 25, 2012 9:48 am | Fabrico, Inc. | Product Releases | Comments

Fabrico, a leader in flexible materials converting and advanced assembly for complex projects, offers precise printing on tape for identification, warning, and instruction in high-performance markets.


Medical Foam Tape Offers Patient Comfort, Superior Breathability

April 27, 2012 6:58 am | Product Releases | Comments

Avery Dennison Medical Solutions has developed a new highly breathable and conformable medical foam tape that provides comfortable, breathable securement and can serve as a backing...

LISTED UNDER: Tapes | Foam


You may login with either your assigned username or your e-mail address.
The password field is case sensitive.