Light-Cured Adhesives Accommodate Any Assembly Schedule
January 13, 2009 6:12 am | Devcon | Product Releases | CommentsVersatile Tru-Bond 18400 Series light-cured pressure-sensitive adhesives provide excellent hold on metals, glass, ceramics, and plastics, including difficult-to-bond materials such as polyethylene and polypropylene panels.
LISTED UNDER: Pressure Sensitive
Adhesive Designed for Foam Bonding
January 12, 2009 12:25 pm | Adchem Corporation | Product Releases | CommentsThis aggressive acrylic-based transfer adhesive is specifically designed for superior foam bonding and elevated temperature performance.
LISTED UNDER: Acrylic
Silicone Adhesives Eliminate Part Racking
January 6, 2009 6:28 am | Product Releases | CommentsThis line of single-component light and moisture curing silicone adhesives is designed for use on medical devices that incorporate silicone materials or require highly flexible bond joints or coatings.
LISTED UNDER: UV-or Light-Cure | Medical Device Testing | Component Testing
Medical Foam Tape Is Moisture Vapor Permeable
December 5, 2008 7:04 am | Product Releases | CommentsScapa 4005-800A is an extremely soft and conformable pressure sensitive polyurethane foam tape for direct skin applications including wound care, consumer dressings, and medical device attachment. It consists of thin (0.
LISTED UNDER: Tapes
Medical Device Adhesive Formulated With See-Cure Technology
December 5, 2008 7:04 am | Product Releases | CommentsThe medical device adhesive 1201-M-SC is a flexible adhesive designed for rapid bonding of a variety of rigid and flexible plastics typically used in the manufacture of medical devices, such as reservoirs, tube sets, and catheters. The recommended substrates include PC, PET, PS, PU, PVC, and ABS.
LISTED UNDER: UV-or Light-Cure
USP Class VI Approved Medical Adhesive Has Quick Set Time
December 5, 2008 7:04 am | Master Bond, Inc. | Product Releases | CommentsThis low viscosity medical epoxy—EP41SMED—has a handling time of as little as 10-15 minutes and forms resistant bonds to cold sterilants such as EtO and gamma radiation as well as water, oil, and many organic solvents.
LISTED UNDER: Epoxy | Biocompatibility Testing
Transdermal Patch Manufacturing System Offers High Speeds
October 13, 2008 12:07 pm | Doyen Medipharm | Product Releases | CommentsThe company has improved its existing production technology to achieve higher production speeds and efficiency to cater to the growing demand for transdermal patches.
LISTED UNDER: Transdermal Components
Low Viscosity Adhesive/Sealant Cures at Room Temperature
October 9, 2008 6:06 am | Master Bond, Inc. | Product Releases | CommentsThis easy-to-use, two-component epoxy adhesive called EP30 is provided for high performance bonding applications. It develops excellent physical strength properties even when cured at ambient temperatures. Cure can be accelerated by use of moderate heat.
LISTED UNDER: Epoxy
Silver-Chloride Material Provides Conductive Solution
October 3, 2008 12:48 pm | Product Releases | CommentsThe unique printed Silver Silver-Chloride material provides higher performance at a lower price, offering medical device manufacturers a refined solution for delivering conductive materials to the industry.
LISTED UNDER: Conductive
Epoxy Offers Excellent Electrical Insulation Properties
October 3, 2008 12:48 pm | Master Bond, Inc. | Product Releases | CommentsSupreme 11AOHT is a two-component room temperature curing epoxy adhesive with high thermal conductivity and excellent electrical insulation properties. It is a paste that can be applied without sagging or dripping even on vertical surfaces.
LISTED UNDER: Epoxy
Adhesives Replace Ultrasonic Welding Applications
September 10, 2008 8:33 am | Product Releases | CommentsThe 1000 seres of medical device adhesives make high-speed, high-volume bonding of medical device housings, tube sets, catheters, enclosures, and housings possible. These solvent-free adhesives replace ultrasonic welding applications and costly two-part products.
LISTED UNDER: Tapes
Infrared Calibrator Heats Up For Fast and Easy High-Quality Thermometer Calibration
August 25, 2008 5:53 am | Fluke Corporation | Product Releases | CommentsThe two new models utilize the same size targets used and recommended by thermometer manufacturers and special design technology that assists in productively performing high-quality infrared thermometer calibrations without requiring a background in physics.
LISTED UNDER: Cyanoacrylate
PSAs Specific for Medical Electrode Manufacturing
August 21, 2008 9:54 am | Product Releases | CommentsProducts in the Electrofix line are single-coated with medical grade acrylic adhesives in varying tacks. For patients with acrylic sensitivities, a medical grade synthetic rubber resin adhesive is also available.
LISTED UNDER: Pressure Sensitive
Castable Urethane Compounds for Making Precision Molds and Holding Fixtures
August 12, 2008 8:15 am | Devcon | Product Releases | CommentsFlexane castable liquid urethane compounds cure to form both flexible and rigid rubber parts for a variety of OEM applications. These room temperature curing, nonshrinking urethanes will not change shape while curing and can be used to make precision molds that faithfully reproduce fine detail.
LISTED UNDER: Urethane
Class VI Adhesive is Optically Clear
August 12, 2008 8:14 am | Master Bond, Inc. | Product Releases | CommentsMaster Bond has introduced UV10MED, a one component, low viscosity, optically clear, UV curable adhesive. The product offers superior adhesion to metals, glass, ceramics, and most plastics. It also has excellent chemical resistance properties and is resistant to many types of sterilants.
LISTED UNDER: UV-or Light-Cure
