Advertisement

UV Cure Adhesive With Bond Strength

September 8, 2009 12:51 pm | Master Bond, Inc. | Product Releases | Comments

Master Bond adds a strength advantage to a UV adhesive compound combining high strength bonds with the well established benefits of UV cure: high productivity, improved performance, and environmental compliance.

LISTED UNDER: UV-or Light-Cure

Hydrophilic Porous Pressure-Sensitive Adhesive for In-Vitro Diagnostic Devices

August 28, 2009 12:02 pm | Product Releases | Comments

ARcare 92205 is an innovative hydrophilic porous pressure-sensitive adhesive technology that increases device functionality by rapidly transmitting fluids or gasses while bonding filters and membranes within in-vitro diagnostic devices.

LISTED UNDER: Pressure Sensitive

Silicone Tape Creates Air-Tight, Water-Tight Bond

August 28, 2009 12:02 pm | Product Releases | Comments

The military-grade, multi-purpose silicone tape (MIL-I-46852C) creates a reliable air-tight, water-tight bond within three minutes of application. Once the product has cured, the protected area withstands exposure to solvents, UV rays, and temperatures ranging from -49°F to 480°F.

LISTED UNDER: Tapes
Advertisement

Flexible Adhesive Changes Colors as it Cures

August 28, 2009 12:02 pm | Product Releases | Comments

The See-Cure 1201-M-SC is a medical grade flexible adhesive designed for rapid bonding of a variety of rigid and flexible plastics. It cures in seconds when exposed to high-intensity UV/visible light, enabling faster processing, greater output, and lower assembly costs.

LISTED UNDER: UV-or Light-Cure

Calibrator Simulates Voltage and Thermocouple Readings

August 28, 2009 12:02 pm | E Instruments International, LLC | Product Releases | Comments

The SignalCal 2 T/C is a compact, lightweight, and easy-to-use hand-held calibrator that simulates both voltage and thermocouple readings. It is built rugged and ships with a holster and calibration certificate included.

LISTED UNDER: UV-or Light-Cure

Hydrocolloid Technology and Ultra-Thin Adhesives Offer Design Solutions

August 5, 2009 10:43 am | Vancive Medical Technologies™ | Product Releases | Comments

Nimbus antimicrobial technology has been applied to adhesives for the purpose of combating infection. It is a next generation antimicrobial technology that is non-leaching, non-toxic, long-lasting, and not blocked by organics, such as blood, urine, or perspiration.

LISTED UNDER: Hydrocolloid/Hydrogel | Product Design

Medical Adhesives Selector Guide

April 2, 2009 5:33 am | Product Releases | Comments

Dymax Corp. offers an enhanced version of their comprehensive Selector Guide on MD Adhesives for Medical Device Assembly. This guide is a valuable tool containing a number of charts intended to help R&D engineers and product designers choose the appropriate adhesive for their application.

LISTED UNDER: UV-or Light-Cure | Product Design | Product R&D

Halogen-Free Adhesives for Assembly of Handheld Electronics

April 1, 2009 10:53 am | Product Releases | Comments

In response to industry initiatives and legislation designed to protect the environment from halogenated materials, a line of Loctite adhesives and sealants are offered that meet the requirements of IPC IEC #61249-2-21.

LISTED UNDER: Epoxy | Silicone
Advertisement

Polyurethane Adhesive Exhibits Very Low Moisture Absorption

March 17, 2009 11:14 am | Ellsworth Adhesives | Product Releases | Comments

This polyurethane encapsulant, UR3005, exhibits very low moisture absorption and high elongation at low temperatures. A polybutadiene modified polyurethane, it has excellent moisture resistance with water pickup of less than 1% during immersion at 60°C.

LISTED UNDER: Urethane

Literature and Website Highlight Loctite Medical Device Adhesives

March 17, 2009 11:13 am | Product Releases | Comments

For medical device manufacturers in search of assembly adhesives and equipment, Henkel Corp. has

LISTED UNDER: UV-or Light-Cure

Rigid, Electrically Conductive Film For Stable Z-Axis Conductivity

February 3, 2009 7:20 am | Product Releases | Comments

This electrically conductive film, ARcare 95000, is offered for use in medical devices that require low resistance and highly reliable Z-axis conductivity. It is a 4.0 mil (0.

LISTED UNDER: Conductive

Adhesives Website

January 14, 2009 9:25 am | Product Releases | Comments

DYMAX has launched a redesigned site that focuses on education with more easy-to-find information, including downloadable literature, selector guides, and product bulletins.

LISTED UNDER: UV-or Light-Cure

Light-Cured Adhesives Accommodate Any Assembly Schedule

January 13, 2009 6:12 am | Product Releases | Comments

Versatile Tru-Bond 18400 Series light-cured pressure-sensitive adhesives provide excellent hold on metals, glass, ceramics, and plastics, including difficult-to-bond materials such as polyethylene and polypropylene panels.

LISTED UNDER: Pressure Sensitive

Adhesive Designed for Foam Bonding

January 12, 2009 12:25 pm | Product Releases | Comments

This aggressive acrylic-based transfer adhesive is specifically designed for superior foam bonding and elevated temperature performance.

LISTED UNDER: Acrylic | Die Cutting | Die Cutting

Silicone Adhesives Eliminate Part Racking

January 6, 2009 6:28 am | Product Releases | Comments

This line of single-component light and moisture curing silicone adhesives is designed for use on medical devices that incorporate silicone materials or require highly flexible bond joints or coatings.

LISTED UNDER: UV-or Light-Cure | Medical Device Testing | Component Testing

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading