Ethyl Cyanoacrylate Adhesive Meets USP Class VI Specifications

June 25, 2008 4:41 am | Master Bond, Inc. | Product Releases | Comments

A room temperature curing ethyl cyanoacrylate adhesive has been introduced. This high strength bonding compound is a single component system and offers excellent adhesion to glass, ceramics, metals, rubber, and most plastics. The adhesive has a low viscosity of 2,000-2,400 cps and is easy to apply.

LISTED UNDER: Cyanoacrylate

Highly Flexible Visible Light-Cure Adhesive Offers Rapid Curing

May 8, 2008 8:42 am | Product Releases | Comments

This rapid curing, highly flexible visible light cure adhesive formulation, Loctite 3974, is offered for medical bonding, potting, and sealing applications.

LISTED UNDER: UV-or Light-Cure

Polymer System Cures by UV Light and/or Heat

April 7, 2008 10:14 am | Master Bond, Inc. | Product Releases | Comments

This one component, optically clear, non-yellowing UV and/or heat curable polymer system is called UV15-7DC. This high performance system is designed for bonding, sealing, and coating applications. It is 100% reactive and does not contain any solvents or other volatiles.

LISTED UNDER: UV-or Light-Cure

Electrically Conductive Adhesive

February 15, 2008 10:10 am | Product Releases | Comments

The company’s medical division offers a complete product line of electrically conductive pressure-sensitive adhesive systems for reliable electrical interconnections in devices such as electrodes, defibrillators, and biosensors.

LISTED UNDER: Conductive

Sterilization Resistant Coating

February 15, 2008 9:34 am | Master Bond, Inc. | Product Releases | Comments

EP42HT-2 is a room temperature curable two component epoxy, adhesive, coating, casting, and sealant material featuring high temperature resistance along with outstanding chemical resistance.

LISTED UNDER: Epoxy | Microbiology/Chemical Testing | Medical Device Testing

Light-Curing Adhesive

February 14, 2008 6:43 am | Product Releases | Comments

See-Cure technology addresses the two most-often asked questions about light-curing products: How do I know I've dispensed enough adhesive? and How do I know when it is cured? Adhesives that are formulated with the See-Cure technology are bright blue in color in the uncured condition.

LISTED UNDER: UV-or Light-Cure

Bonding Solutions With Resin

January 15, 2008 8:30 am | Product Releases | Comments

A broad range of the company’s tape products have been tested with the SABIC Innovative Plastics


Mounting Adhesive

October 11, 2007 9:43 am | Product Releases | Comments

The 8311M-76G permanent/removable mounting adhesive is available on double-coated polyester film. It brings a clean, permanent/removable bond to medical devices for temporarily mounting foams, polycarbonates, plastics to glass and other hard surfaces.


Room Temperature Curing Adhesive

August 10, 2007 5:15 am | Master Bond, Inc. | Product Releases | Comments

EP33 is a unique room temperature curing epoxy adhesive for high temperature bonding applications. This two component epoxy offers the convenience of a room temperature cure with high temperature performance combined with good physical strength and dielectric properties.



May 8, 2007 11:29 am | Product Releases | Comments

In-line laminate systems allow for both flexible film and sheet to achieve superior mechanical bonds to fabric during manufacturing. These improvements eliminate secondary processes, allowing for a single in-line laminate technique that negates the need for adhesives.



May 8, 2007 11:29 am | Product Releases | Comments

High quality 3M VHB bonding and sealing tape is designed to permanently bond and seal a variety of metals, plastics, and other surfaces during medical device assembly, resulting in increased productivity, exceptional strength, extensive durability, and improved product appearance.


Optically Clear Epoxy

March 12, 2007 1:25 pm | Master Bond, Inc. | Product Releases | Comments

EP30HT&#151a transparent, highly versatile epoxy&#151is offered for general purpose bonding, casting, coating, and potting.

LISTED UNDER: Epoxy | Casting

UV Curable Polymer System

March 12, 2007 1:24 pm | Master Bond, Inc. | Product Releases | Comments

UV15-7LRI is an optically clear UV curable polymer system formulated to have a low 1.481 refractive index. It produces durable, tough, non-yellowing, and chemically resistant bonds, seals, or coatings with excellent optical and electrical insulation properties.

LISTED UNDER: UV-or Light-Cure

Aluminum Tapes

March 12, 2007 1:23 pm | Product Releases | Comments

The 3M 427 and 439 aluminum tapes are offered for a variety of microplate sealing applications in the healthcare industry. These tapes offer a combination of performance and value and are a great alternative to more expensive tapes.


Packaging Adhesives

December 18, 2006 5:42 am | Product Releases | Comments

A variety of adhesive solutions and components are offered to meet the needs of manufacturers and converters of flexible packaging.

LISTED UNDER: Pressure Sensitive


You may login with either your assigned username or your e-mail address.
The password field is case sensitive.