Advertisement

Films That Dissolve Diagnostics Manufacturers' Needs

October 10, 2006 6:15 am | Product Releases | Comments

Dissolvable films are currently used in a variety of applications such as consumer breath freshener products and as vehicles for over-the-counter drug delivery. Manufacturers are also exploring the technology’s unique characteristics for use with in vitro diagnostic devices.

LISTED UNDER: Films | Product Design

Polyester Film Tape

September 7, 2006 5:49 am | Product Releases | Comments

This double-coated polyester film tape&#1513175M&#151is designed to bond to most foam and gasket materials.

LISTED UNDER: Films

Adhesive Tape (3253)

August 8, 2006 12:50 pm | Product Releases | Comments

Bioflex Rx1184P-2.4 is a durable, heavyweight fabric adhesive tape for direct skin medical device attachment. The product is specifically designed for bandages, insulin infusion sets, ECG electrodes, and TENS.

LISTED UNDER: Tapes | Die Cutting | Die Cutting
Advertisement

Epoxy (3125)

July 5, 2006 11:07 am | Master Bond, Inc. | Product Releases | Comments

The EP37-3FLSP polymer system is an optically clear, flexible, low viscosity two-part epoxy system for large volume castings. It features a long working life, low exotherm during cure, and very low shrinkage, as well as excellent dimensional stability.

LISTED UNDER: Epoxy | Casting

Hearing Aid Adhesive

May 2, 2006 8:28 am | Product Releases | Comments

Designed for vent channel formation and shell repair, Loctite 3691 ResinAid is a pink one-part acrylic adhesive that cures tack-free in less than 20 seconds on exposure to UV or visible light of the right intensity. In less than 10 seconds, this light cure product can cure to a thickness of 0.06 in.

LISTED UNDER: Acrylic

Visible Light Cure Adhesive

March 8, 2006 9:41 am | Product Releases | Comments

Loctite Visible Light Cure technology is an innovation that relies solely upon the visible light spectrum to deliver a safe, efficient, immediate cure for a broad array of medical device assembly applications.

LISTED UNDER: UV-or Light-Cure

Heat-Cured Epoxy

February 6, 2006 10:30 am | Product Releases | Comments

SC 2002 NS one-part epoxy adhesive bonds to a remarkable variety of substrates, including dissimilar substrates such as fabrics, steel (stainless, mild-carbon, galvanized, tin-plated, or unfinished), aluminum, ceramics, and glass.

LISTED UNDER: Epoxy

Adhesive/Sealant

February 6, 2006 10:29 am | Master Bond, Inc. | Product Releases | Comments

Polymer System UV15X-6 is an optically clear, flexible UV curable adhesive/sealant that fully qualifies to the USP class VI protocol. It is a single component special urethane formulation which is 100% reactive and does not contain any volatiles.

LISTED UNDER: UV-or Light-Cure
Advertisement

Adhesive Film

August 11, 2005 10:41 am | Product Releases | Comments

ARcare 90106 is a clear, double-faced film coated on both sides with a high coatweight, hybrid pressure-sensitive adhesive available in roll stock form. It is used in medical applications such as bonding in microfluidic devices or other disposable test formats.

LISTED UNDER: Films

Pressure-Sensitive Adhesives

August 11, 2005 10:41 am | Product Releases | Comments

From single- and double-coated foams to films and non-wovens, pressure-sensitive adhesive tapes

LISTED UNDER: Pressure Sensitive

Antimicrobial Film

May 31, 2005 6:36 am | Product Releases | Comments

The Autotex AM film with Microban antimicrobial product protection is designed for surface applications where inhibiting the growth of microorganisms is essential or desirable.

LISTED UNDER: Films

Release Coatings

February 28, 2005 8:49 am | Product Releases | Comments

Non-silicone release coatings are designed for applications where a residue cannot be left behind that might contaminate a material or process. Available on a variety of films and papers up to 82 in. W, these non-silicone release coatings will not change the properties of an adhesive.

LISTED UNDER: Films | Silicone | Device Coating

UV Curable Adhesive

February 1, 2005 9:21 am | Master Bond, Inc. | Product Releases | Comments

This one component, optically clear, non-yellowing UV curable polymer called YV15-7 does not contain any solvents or other volatiles. When exposed to a source of UV light of adequate wave length and intensity, it cures almost instantaneously. It is not inhibited by air and cures at room temperature.

LISTED UNDER: UV-or Light-Cure

Double-Faced Tape

February 1, 2005 9:21 am | Product Releases | Comments

ARcare 90106 is a clear, double-faced film coated on both sides with a higher coat weight hybrid adhesive for use in medical applications.

LISTED UNDER: Films

Manufacturing Rx: Partnerships Add Developmental Strength

February 1, 2005 7:13 am | Product Releases | Comments

Medical device manufacturers can maximize innovation and business investments by partnering with companies who share a parent entity. Such supplier partnerships can help solve problems and speed products to market.

LISTED UNDER: Pressure Sensitive | Microbiology/Chemical Testing | Medical Device Testing

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading