Advertisement
Compounds

Non-Flammable Molding Compound

March 18, 2015 9:03 pm | by Mitsubishi Gas Chemical America Inc. | Product Releases | Comments

Mitsubishi Gas Chemical America’s Vyloglass a new type of thermosetting dry-type polyester molding compound that is non-flammable and resistant to electric spark; providing a high safety level reaching UL-94 class V-0 flame retardance rating. Nonflammable – Does not burn in spite of being...

LISTED UNDER: Molding

VARIABLE FLEXIBILITY POLYMER TUBING

March 11, 2015 3:56 pm | ASAHI INTECC USA, INC. | Products

Asahi Intecc-GMA offers multi-segmented flexibility on continuously extruded shafts which can potentially eliminate or significantly reduce material, labor, and manufacturing costs to fabricate small or large batches of variable flexibility polymer tubes. Asahi Intecc – GMA has estimated up to 3 times labor , manufacturing, and material cost savings and half the work time when extruding the one piece multi-flex polymer tube and comparing to the costs of extruding the multi-piece array of hand assembled polymer shafts. These tubings are often used for catheter delivery systems, in which a proximal push and distal tip floppiness is desired on one tube to for precise vascular positioning.

LISTED UNDER: Full Service Contract Manufacturing | Product Design | Product R&D

Compounding Service - Polymer Blending

March 11, 2015 3:41 pm | ASAHI INTECC USA, INC. | Products

Asahi Intecc offers to medical tubing manufacturers and polymer processors a compounding service in materials of FEP, PTFE, PFA, PE (HDPE, LDPE), NYLON, (Grilamid, Polyamide, Polyamide Elastomer, PEBAX) TPU, PP, in small, affordable quantities and short lead-times. Small lots (5kg) with excellent consistency and dispersion may be blended or pelletized in a wide range of colors. Contrast media options include bismuth trioxide Bi2O3, barium sulfate (BaSO4), bismuth subcarbonate (BiO)₂CO₃are available for applications which are viewed under fluoroscopy.

LISTED UNDER: Extrusion | Plastics | Additives/Blends
Advertisement

Thermosetting Dry-Type Polyester Molding Compound

January 13, 2015 9:37 pm | by Mitsubishi Gas Chemical America | Product Releases | Comments

Vyloglass is a thermosetting dry-type polyester molding compound developed with the use of Japan U-Pica Company’s exclusive technology. Exemplified in the manufacture of a Brush Holder for a Dynamic Motor, see attached specification brief...

LISTED UNDER: Molding | Polyesters

Micromachining

September 30, 2014 5:49 pm | Mikrotech | Products

Micromachining from Mikrotech offers best-in-class multi-axis CNC and Swiss screw machining services for prototype and low volume production. The company's micromachining processes overcome the limitations of established technologies enabling MIS device designers and manufacturers to design and fabricate smaller components with more complex features and higher precision tolerances.

LISTED UNDER: Micro Molding | Micromachining | Molding

Medical Color Concentrate Line

June 30, 2014 5:22 pm | by MDT Staff | Compounding Solutions | Product Releases | Comments

Compounding Solutions has announced the launch of a new line of medical grade color concentrates to better serve their current and future medical customers. These color concentrates are the first of several new product lines that the company is...

LISTED UNDER: Molding | PEBA Copolymers

Overmolding Soft-Touch TPEs for Mobile Devices

March 12, 2014 6:19 pm | by MDT Staff | Product Releases | Comments

APS Elastomers has developed a new series of overmolding soft-touch thermoplastic elastomers (TPEs) designed for cell phone and other personal electronic devices...

LISTED UNDER: TPE | Thermoplastic Elastomers

Enhanced Molding Capabilities

August 5, 2013 3:44 pm | by MDT Staff | Product Releases | Comments

Helix Medical has announced additional capabilities in thin-wall injection molding utilizing implantable PEEK and silicone materials. Other specialized molding services include implantable thermoplastic & silicone specialty components, biopharmaceutical components, and fully-automated molding of tight tolerance silicone bellows.

LISTED UNDER: Molding | Silicone
Advertisement

Patented Alloy Provides Breakthrough Parts Characteristics and One-Step Parts Processing

June 11, 2013 5:21 pm | by MDT Staff | Product Releases | Comments

Based on a scientific breakthrough developed at Caltech, the Department of Defense, and NASA, Liquidmetal Technologies has introduced an amorphous metal alloy that can be used in the production of highly complex parts via an efficient injection-molding process.

LISTED UNDER: Molding | Metals

Radiopaque Tubing

June 5, 2013 5:01 pm | Extrusion Alternatives, Inc. | Products

Radiopaque Tubing

LISTED UNDER: Extrusion | Product R&D | Prototyping

IV Sets

June 5, 2013 4:49 pm | Extrusion Alternatives, Inc. | Products

IV Sets

LISTED UNDER: Extrusion | Product R&D | Prototyping

Guidewire

June 5, 2013 4:44 pm | Extrusion Alternatives, Inc. | Products

Guidewires

LISTED UNDER: Extrusion | Product R&D | Prototyping

Needle & Sharps Guards

June 5, 2013 4:38 pm | Extrusion Alternatives, Inc. | Products

Needle & Sharps Guards

LISTED UNDER: Extrusion | Product R&D | Prototyping

Advanced Fabrication Technology for Thin-Walled Urethane Extrusions

August 5, 2009 10:43 am | Product Releases | Comments

Advanced technology for producing thin walled, large diameter, low durometer urethane extrusions is available. Commonly used in minimally invasive medical devices, such extrusions have been fraught with manufacturability challenges.

LISTED UNDER: Extrusion

International Plastics Design Competition

December 5, 2008 7:03 am | Product Releases | Comments

The Alliance of Plastics Processors (APP) is now accepting applications for the International Plastics Design Competition (IPDC), which will co-locate with NPE2009 on June 22-26 at Chicago's McCormick Place.

LISTED UNDER: Molding

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading