Advertisement
Filtration Materials

Sintered Porous Materials for Medical Applications

January 6, 2014 1:18 pm | by MDT Staff | Product Releases | Comments

Porvair Filtration Group offers the regulatory approved BioVyon sintered porous plastic materials and its flagship product, Chromatrap, based upon proprietary BioVyon technology and used by researchers to identify cancer biomarkers.

LISTED UNDER: Microporous | Other | Plastic

Tough Unfilled Nylon for Additive Manufacturing

December 17, 2013 2:53 pm | by MDT Staff | Stratasys Inc. | Product Releases | Comments

Stratasys introduced FDM Nylon 12, the first nylon material specifically engineered for the company’s line of Fortus 3D Production Systems. Stratasys believes that with FDM Nylon 12, its Fused Deposition Modeling (FDM) technology creates tougher, more flexible unfilled nylon parts than other additive manufacturing technologies can.

LISTED UNDER: Nylon

PVDF Copolymer for Minimally Invasive Catheters

October 22, 2013 4:25 pm | by MDT Staff | Product Releases | Comments

Arkema has introduced Kynar Rx 752 polyvinylidene fluoride (PVDF) copolymer for use in minimally invasive medical catheters that are exposed to bodily fluids for less than 30 days. Kynar Rx 752 copolymer exhibits exceptional flexibility, very low friction, and can be melt extruded in single or multi-layers for catheter shafts and other performance medical tubing.

LISTED UNDER: PVDF (Kynar)
Advertisement

High Performance Ceramic for Increased Life-Span of Orthopedic Implants

May 24, 2013 2:32 pm | by MDT Staff | Product Releases | Comments

Innovnano has developed 3 mol % yttria stabilised zirconia powder (3YSZ) – an advanced technical ceramic with medical device applications. Thanks to a uniform nanostructure and formation of a high stability phase under pressure, Innovnano’s 3YSZ combines extreme component strength and fracture-resistance with enhanced biocompatibility...

LISTED UNDER: Ceramic

Carbon Comps Ideal for High Energy Load Dump Applications

May 7, 2013 4:32 pm | by MDT Staff | Stackpole Electronics, Inc. | Product Releases | Comments

Stackpole’s RC series is an axial leaded carbon composition technology available in 1/4W, 1/2W, and 1W power ratings. The RC’s dense carbon slug element handles high-energy surges much better than metal film based surge resistors.

LISTED UNDER: Resistors | Carbon | Composites

Precision Die Cutting Produces Medical Parts to Specification

February 7, 2013 4:07 pm | by MDT Staff | Interstate Specialty Products, Inc. | Product Releases | Comments

If you need custom fabricated precision filters, gaskets, membranes, seals, shields, spacers, and related parts for medical applications, check with Interstate Specialty Products, Inc.

LISTED UNDER: Die Cutting | Plastic | Sheet/Film

Custom Laser Components

November 6, 2006 5:02 am | Andrews Glass Company | Product Releases | Comments

Extensive glass fabrication capabilities and engineering assistance is offered to companies who need laser components produced to their specifications.

LISTED UNDER: Glass

HEPA/ULPA Filters

November 2, 2004 6:07 am | Product Releases | Comments

Company manufactures both HEPA and ULPA filters for environments with the most stringent air purity requirements, including health care, pharmaceutical, laboratory, and others. Microguard 99 filters are available in 99.97%, 99.99%, and 99.999% efficiencies on 0.3 microns.

LISTED UNDER: Cellulosic

Pad Materials

June 8, 2004 9:52 am | Millipore Corporation | Product Releases | Comments

Company has expanded its SureWick&#153 product line of materials for sample, conjugate, and absorbent pads. With a broader selection of standard product specifications, researchers can easily optimize the performance of their test strips in diagnostic assay devices.

LISTED UNDER: Glass
Advertisement
X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading