Advertisement
Materials Processing

MasterSil 912Med

June 9, 2015 9:54 am | Master Bond, Inc. | Products

Specially formulated for medical device applications, Master Bond MasterSil 912Med is a room temperature vulcanizing silicone system for high performance bonding, sealing and coating. This system meets both USP biocompatibility and ISO cytotoxicity standards and resists a variety of sterilization techniques such as gamma radiation, EtO and some types of liquid sterilants.

LISTED UNDER: Silicone | Elastomers | Silicone

LOW-STRETCH STAINLESS CABLES (COATED, MASKED, HIGH TENSION)

March 11, 2015 6:15 pm | ASAHI INTECC USA, INC. | Products

Asahi Intecc offers responsive high-tension angulation wires (or low-stretch stainless cables) to medical device and endoscope product designers and high-volume manufacturing programs, increasing your fatigue and breakload strength to comparable cables with identical material, configuration, and diameter by 10 to 20%. These high-tension angulation wires may be coated with durable, abrasion-resistant ptfe and nylon coatings, depending on the application. Additional advantages include a clean material surface finish on the stainless cable which is extremely easy to solder; swaging, coating, and masking for your specific durability, and custom stainless cable assembly.

LISTED UNDER: Design Services | Product Design | Abrasion resistant

Compounding Service - Polymer Blending

March 11, 2015 3:41 pm | ASAHI INTECC USA, INC. | Products

Asahi Intecc offers to medical tubing manufacturers and polymer processors a compounding service in materials of FEP, PTFE, PFA, PE (HDPE, LDPE), NYLON, (Grilamid, Polyamide, Polyamide Elastomer, PEBAX) TPU, PP, in small, affordable quantities and short lead-times. Small lots (5kg) with excellent consistency and dispersion may be blended or pelletized in a wide range of colors. Contrast media options include bismuth trioxide Bi2O3, barium sulfate (BaSO4), bismuth subcarbonate (BiO)₂CO₃are available for applications which are viewed under fluoroscopy.

LISTED UNDER: Extrusion | Plastics | Additives/Blends
Advertisement

Pump Components

January 29, 2015 1:38 pm | by Morgan Advanced Materials Seals and Bearings | Product Releases | Comments

Morgan Advanced Materials’ Seals and Bearings business highlights their pump components applicable to variety of applications and industries. Morgan offers a selection of high performance axial and radial bearings, seal face components, rotors and vanes, in a range of sizes and compositions. The pump components are manufactured from specialized formulations of carbon/graphite and silicon...

LISTED UNDER: Chemically Inert | Silicone

Versatile Grade TPU for Injection Molding

July 14, 2014 9:05 pm | by MDT Staff | Product Releases | Comments

APS Elastomers has developed a versatile thermoplastic polyurethane specifically formulated for injection molding applications. The polyester-based TPU exhibits excellent abrasion resistance and toughness and has good hydrolytic stability, oil, fuel and solvent resistance...

LISTED UNDER: Elastomers | Polyurethanes | Thermoplastic Elastomers

Advanced Alumina Ceramic Finds Niche in Oncology Equipment

June 18, 2014 7:46 pm | by MDT Staff | Product Releases | Comments

Thanks to its excellent dielectric properties and a reliable surface finish, a high-quality alumina ceramic from Morgan Advanced Materials is now being successfully used in radiotherapy equipment for oncology treatment...

LISTED UNDER: Ceramics

New Medical Elastomers for Wire and Cable Outperform TPVs

February 4, 2014 5:10 pm | by MDT Staff | Product Releases | Comments

Minnesota Wire has replaced the thermoplastic vulcanizate (TPV) elastomers that are standard in such applications with new styrenic thermoplastic elastomer (TPE-S) compounds from Teknor Apex Company, citing better performance initially and after autoclaving, superior processing, and an enhanced look and feel in the end product...

LISTED UNDER: Elastomers

Patented Alloy Provides Breakthrough Parts Characteristics and One-Step Parts Processing

June 11, 2013 5:21 pm | by MDT Staff | Product Releases | Comments

Based on a scientific breakthrough developed at Caltech, the Department of Defense, and NASA, Liquidmetal Technologies has introduced an amorphous metal alloy that can be used in the production of highly complex parts via an efficient injection-molding process.

LISTED UNDER: Molding | Metals
Advertisement

Composite Clad Metal Wire Replaces Pure Platinum, Gold, Silver

June 5, 2013 5:25 pm | by MDT Staff | Product Releases | Comments

Composite clad metal wire that can be formulated to improve the performance characteristics of precious metal solid wire at a small fraction the cost is available from Anomet Products. Anomet Precious Metal Clad Wire can be formulated to accentuate specific performance characteristics such as strength, radiopacity and corrosion-, contact-, or temperature-resistance. 

LISTED UNDER: Metals

GW Silicones

June 3, 2013 3:25 pm | GW Plastics, Inc. | Products

GW Silicones, a division of GW Plastics, Inc., delivers cost-effective, single-source solutions for precision Liquid Injection Molding (LIM) and manufacture of Liquid Silicone Rubber (LSR) components and assemblies. GW Silicones specializes in application-specific material selection, product design and development, in-house precision tooling, and advanced Liquid Injection Molding (LIM) technologies designed to eliminate waste and ensure the highest quality products. Along with a variety of contract manufacturing services such as heat curing, sterilization, assembly, pad printing, and packaging, GW Silicones is a trusted partner for quick prototypes, flawless launch and reliable continuous production.

LISTED UNDER: Injection Molding | Insert Molding | Molding

Addition Cured Silicone for Biocompatibility and Cytoxicity

May 21, 2013 2:43 pm | by MDT Staff | Master Bond, Inc. | Product Releases | Comments

The MasterSil 153Med has been introduced by Master Bond. The two part silicone with a paste consistency features a convenient one to one mix ratio by weight, and does not require exposure to air and humidity for cross-linking. It has a long working life of 5-7 hours and will not outgas while curing.

LISTED UNDER: Silicone

From Almost Invisible to 1.0mm Thick Foils for Research Applications

April 30, 2013 5:23 pm | by MDT Staff | Product Releases | Comments

Foils as thin as 0.00025mm are among the many foils available from Goodfellow for research and product development. More than 50 pure metals and approximately 100 alloys are represented in the company’s full line of foils, with some of them – rolled or deposited in Goodfellow’s own production department – not available from any other supplier.

LISTED UNDER: Foils | Metals | Alloys

Engineered Metal Solutions to Showcase at MD&M East Exposition

April 30, 2013 4:56 pm | by MDT Staff | Product Releases | Comments

ATW Companies will be highlighting its leadership in engineered metal solutions for medical devices at the MD&M East Exposition, Booth #3434 from June 18-20, 2013 at the Pennsylvania Convention Center in Philadelphia, Pennsylvania.

LISTED UNDER: Metals

Non-Phthalate Plasticizer Portfolio

April 26, 2013 3:20 pm | by MDT Staff | Eastman Chemical Company | Product Releases | Comments

Eastman Chemical Company today announced it will expand its non-phthalate plasticizer portfolio with the addition of Eastman 168 SG (sensitive grade) non-phthalate plasticizer. Eastman 168 SG non-phthalate plasticizer is an enhanced grade of the industry-leading Eastman 168 non-phthalate plasticizer.

LISTED UNDER: Plastics

Sheeting

April 26, 2013 1:59 pm | Specialty Silicone Fabricators | Products

At SSF, we can develop sheeting from both high consistency silicone rubber (HCR) and from liquid silicone rubber (LSR). Our expertise in this area is demonstrated by our Gel-Spandex sheeting (US Patent 7,645,916 B2) and our patent pending on LSR reinforced sheeting. We can consistently maintain sheeting thickness from 0.0254mm (0.001") to 5.08mm (0.200") and can fabricate to your precise specification. Our silicone sheeting is latex-free and can be laminated to many substrates. Sheeting and film production are carried out in cleanrooms certified Class 10,000 / ISO 7. Additionally, all production is FDA QSR, 21 CFR Part 820 and cGMP compliant.

LISTED UNDER: Sheet/Film | Silicone

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading