Advertisement

Fiber-reinforced LSR Technology for Wearable Devices

March 6, 2014 2:58 pm | by MDT Staff | Momentive Performance Materials Inc. | Product Releases | Comments

Momentive Performance Materials is showcasing its fiber-reinforced liquid silicone rubber for designers seeking ways to enhance the ergonomics and aesthetics of wearable medical devices, as the demand for this type of product grows...

LISTED UNDER: Rubber | Silicone

World’s Thinnest, High-strength UHMWPE Fiber

February 24, 2014 5:30 pm | by MDT Staff | DSM | Product Releases | Comments

DSM is expanding its Dyneema Purity fiber portfolio and is commercially launching the thinnest, high-strength, medical-grade UHMWPE fiber available on the market, Dyneema Purity 10 dtex fiber. The fiber will be available in both white and blue...

LISTED UNDER: Other | Textiles

Micro Waterjet

February 21, 2014 12:03 pm | RepExact, LLC | Products

Micro Waterjet uses its proprietary equipment to cut precision components from flat materials with no heat effects, with kerf widths down to 8 thous (200 µm). An alternative to laser and wire EDM where heat must be avoided. Wide variety of suitable materials includes stainless, Nitinol, CF, Teflon®, and PEEK. Equipment also for sale.

LISTED UNDER: Composites | Foam | Nitinol
Advertisement

EMI Shielding Material for Precision Die-Cuts

February 12, 2014 4:39 pm | by MDT Staff | Product Releases | Comments

Many electronic enclosures have gaps that allow unwanted RF and electromagnetic interference to escape into the surrounding environment. These openings are commonly found around the I/O panel, backplane and access panels of the enclosure...

LISTED UNDER: Conductive | Foam | Other

Medical Materials Innovation Showcasing at MD&M West 2014

February 12, 2014 4:31 pm | by MDT Staff | Product Releases | Comments

At the MD&M West event in Anaheim, California, the Electronics Group of Henkel will show visitors why it is the leading materials innovator for medical device manufacture. From booth #453, Henkel will showcase some of its most recent materials developments...

LISTED UNDER: Other

High Frequency, Fine Pitch Piezoelectric Composite

January 28, 2014 3:45 pm | by MDT Staff | Product Releases | Comments

Morgan Advanced Materials has announced the launch of a new range of piezoelectric composite components, ideal for applications where high performance is critical, including medical imaging, doppler flow, and military and commercial sonar. Components manufactured with Piezo composite materials offer improved acoustic performance...

LISTED UNDER: Composites

Immediate Commercial Availability of NickelAlloy HX

November 22, 2013 3:02 pm | by MDT Staff | Product Releases | Comments

EOS is expanding its portfolio of metal materials with the immediate commercial introduction of EOS NickelAlloy HX.

LISTED UNDER: Alloys

Quick Turnkey Optical Solutions with Extensive In-Stock Glass Inventory

November 6, 2013 2:52 pm | by MDT Staff | Product Releases | Comments

Precision Glass & Optics (PG&O) offers an extensive variety of in-stock glass substrates, including the robust Schott Supremax 33, a rolled sheet borosilicate glass used for applications that require low thermal expansion, high thermal resistance, and low density (12 % lighter than soda lime glass).

LISTED UNDER: Glass
Advertisement

Nylon Foam Sheets Mold Into Simple or Highly-Complex Shapes

August 9, 2013 5:35 pm | by MDT Staff | Product Releases | Comments

Pres-On is bringing manufacturers a cost-effective alternative to silicone foam with its N3000, a lightweight, closed cell, cross linked foam based on Nylon 6. It is offered in 39" x 78" sheets in thicknesses ranging from 1/16-inch to 1/2-inch, and can be specified with or without an acrylic adhesive.

LISTED UNDER: Foam | Nylons

Carbon Comps Ideal for High Energy Load Dump Applications

May 7, 2013 4:32 pm | by MDT Staff | Product Releases | Comments

Stackpole’s RC series is an axial leaded carbon composition technology available in 1/4W, 1/2W, and 1W power ratings. The RC’s dense carbon slug element handles high-energy surges much better than metal film based surge resistors.

LISTED UNDER: Resistors | Carbon | Composites

From Almost Invisible to 1.0mm Thick Foils for Research Applications

April 30, 2013 5:23 pm | by MDT Staff | Product Releases | Comments

Foils as thin as 0.00025mm are among the many foils available from Goodfellow for research and product development. More than 50 pure metals and approximately 100 alloys are represented in the company’s full line of foils, with some of them – rolled or deposited in Goodfellow’s own production department – not available from any other supplier.

LISTED UNDER: Foils | Metals | Alloys

Extruded Rubber Shapes Match Gasket and Seal Requirements

April 12, 2013 4:51 pm | by MDT Staff | Product Releases | Comments

Interstate Specialty Products (Sutton, MA) has introduced custom rubber shapes extruded with specific profiles, from a variety of elastomers, to exactly match OEM gasketing and sealing applications.

LISTED UNDER: Rubber

Morgan Technical Ceramics Launches New High-Performance Piezoelectric Material

April 11, 2013 3:58 pm | by MDT Staff | Product Releases | Comments

Morgan Technical Ceramics is extending its material portfolio with the launch of a new piezoelectric material. PZT5K1 is suitable for applications in the fields of scientific instrumentation, maritime, medical, energy harvesting and general industry.

LISTED UNDER: Ceramics

High Intensity Focused Ultrasound Transducer

March 20, 2013 12:01 pm | Piezo Technologies | Products

While the horizons for HiFU medical applications continues to broaden, your needs for product differentiation and precise performance criteria have been refined. Piezo Technologies has the advanced high drive materials, transducer designs, and manufacturing reliability to help bring your product to market. Each HiFU solution is designed for your specific needs and with efficient cost and turnaround time. Contact us to learn how smarter HiFU transducer solutions can differentiate your product with: • 30+ years HiFU experience • K320, K330, K340, Nova 3B • Customized design & testing • ISO Certified Manufacturing

LISTED UNDER: Transducers | Crystals/Oscillators/Piezoelectrics | Signals/Indicators/Alarms

Dual Element Transducers

March 20, 2013 11:58 am | Piezo Technologies | Products

Piezo Technologies' Dual Element Transducers are designed for excellent near surface resolution while maintaining high sensitivity and are used for flaw detection, thickness gauging, cure monitoring, fluid flow Doppler probes, and level switches.

LISTED UNDER: Transducers | Flow | Probes

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading