Advertisement

Economical, Nylon Self-Retaining Spacers and Washers

May 6, 2011 7:43 am | Keystone Electronics Corp. | Product Releases | Comments

A new assortment of cost-saving, Nylon spacers and washers designed to grip the outside of a screw shank is now available from Keystone Electronics Corp.

LISTED UNDER: Nylons
Advertisement

Polyurethane Film-on-Paper With Controlled Release

April 27, 2011 6:51 am | Argotec, Inc. | Product Releases | Comments

Argotec Inc. introduced ArgoMedPLUS 18411, a revolutionary new thermoplastic polyurethane (TPU) film-on-paper product that will allow medical adhesive coaters, converters and distributor/retailers...

LISTED UNDER: Films | Polyurethanes | Urethanes

Thermoplastic Polycarbonate-Urethane

April 21, 2011 6:54 am | DSM | Product Releases | Comments

Bionate II PCU is an innovative, medical polymer with built-in surface modification technology. It is designed for chronic implants, with enhanced processing and it is backed by an established FDA Master File.

LISTED UNDER: Polycarbonates | Plastics | Urethanes

Microporous PTFE Membranes Resist Chemicals and Closure Under Pressure

April 13, 2011 7:11 am | Interstate Specialty Products, Inc. | Product Releases | Comments

Standard and custom die-cut microporous PTFE membranes that require no lamination for support and are suitable for filtering liquids and gasses in a variety of laboratory and industrial instruments...

LISTED UNDER: PTFE

Connectors in Nylon and Polypropylene

March 17, 2011 7:33 am | Qosina | Product Releases | Comments

Qosina has teamed up with Colder Products Company to now offer their FitQuik Connectors. Available in both white and black nylon and natural polypropylene, the more than 350 fittings...

LISTED UNDER: Nylons | Polypropylenes | Fittings

Vacuum Pumps for High-Speed Pick and Place Systems

March 16, 2011 7:19 am | Anver Corp. | Product Releases | Comments

Anver VR Series Venturi Vacuum Pumps feature aluminum construction with brass inserts, have no moving parts to wear out, and can pull a 26 in. Hg vacuum with only 0.74 to 1.27 SCFM air flow and 72 psi supply pressure.

LISTED UNDER: Vacuum | Fittings | Air Pump

Charger for Lithium-Ion and Lithium Polymer Battery Pack

March 11, 2011 6:38 am | GlobTek, Inc. | Product Releases | Comments

GlobTek’s GS-2262 series of Li-ON chargers offers a compact and cost effective solution for charging GlobTek’s GL-523434A2 Lithium-Ion and Lithium Polymer battery pack.

LISTED UNDER: Batteries | Polymers | Batteries

Vibration Isolators Designed for Medical Applications

February 28, 2011 5:48 am | Product Releases | Comments

Advanced Antivibration Components (AAC) offers functional vibration isolators for the medical industry, including silicone gel pads, sheets, and silicone gel, as well as wire rope isolators for larger applications.

LISTED UNDER: Wire and Cable | Silicone

Silicone Device Manufacturing and Gentle Wound Dressings

February 18, 2011 5:30 am | Dow Corning Corp. | Product Releases | Comments

Dow Corning also showcased a line of advanced wound dressings, Dow Corning Soft Skin Adhesives. The newest offering, Dow Corning MG7-9900, allows for longer wear due to higher adhesion...

LISTED UNDER: Silicone | Silicone | Injection Molding

Polymer Laminate Technology Enables Rapid Prototyping of Bio Microfluidic Devices

February 17, 2011 6:34 am | ALine Inc | Product Releases | Comments

ALine's Polymer Laminate Technology (PLT) enables rapid prototyping and volume manufacture of bio microfluidic devices. PLT allows lab-on-a-chip functionality, supporting the next generation of products...

LISTED UNDER: Rapid Prototyping Equipment | Prototyping | Laminates

Bioabsorbable Polymers

February 10, 2011 5:07 am | Zeus | Product Releases | Comments

Zeus can process these polymers into virtually any form including tubes, monofilament, sheets, microporous non-wovens, and molded articles.

LISTED UNDER: Polymers

Silicone and Plastic Components and Medical Devices

February 10, 2011 5:01 am | Product Releases | Comments

Parker Hannifin Corp. partners with customers to design and manufacture silicone and plastic components and medical devices. Capabilities include medical device fabrication and assembly, medical grade silicone extrusions and tubing...

LISTED UNDER: Plastics | Silicone | Silicone

Extensive Precision Laser Services

February 8, 2011 9:25 pm | Laserage Technology Corporation | Product Releases | Comments

Laser processing offers precision, repeatability, high process speeds, high volume production, and many other benefits not provided with traditional welding, cutting, and drilling methods.

LISTED UNDER: Lasers | Nitinol | Silicone

Flow Control Switch Is Made of a Polycarbonate Body

January 31, 2011 7:03 am | Qosina | Product Releases | Comments

Made of a polycarbonate body and an acetal slider which acts as an ON/OFF switch, this high pressure flow control switch can be used with any application that involves liquid flow and requires inline shut off capability.

LISTED UNDER: Polycarbonates | Switches/Pushbuttons | Control

Medical Components Custom Molded Of PEEK

January 26, 2011 5:05 am | Minnesota Rubber & Plastics | Product Releases | Comments

From simple to complex designs, medical components custom molded of PEEK from Minnesota Rubber and Plastics (MR&P) improve performance while reducing costs.

LISTED UNDER: PEEK, PEK

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading